Samsung Syncmaster 923nw Quick Start Guide

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not  Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button. 
How to install
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click the  Display Icon.  
3. Choose the...

4. Click Apply button if you see the screen working normally after clicking 
Test. If the screen is not 
normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at  All Display Modes, select the level of resolution and vertical frequency 
by referring to the  Preset Timing Modes  in the user guide.
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make the  X86Config file, which is a type of system setting file.  
  1. Press Enter...

 
 
1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]This button allows you to adjust items in the menu.
3. [ ]Press this button to activate a highlighted menu item.
4. [
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 AUTO 
 

MenuDescription
AUTO  When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
 
 
- If auto adjustment does not work properly, press AUTO button again to 
adjust picture with more accuracy. 
 
- If you change resolution in the control panel, auto function will...

LockedAfter pushing the MENU button more than 5 seconds, OSD function is 
locked (unlocked). You can adjust only the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 
 
 Customized key 
 
Menu Description
Customized key You can customize key assignment for the Custom button according to 
your preferences. 
To view the operating screen displayed when pressing the [   ] button 
after configuring the customized key for a function, click the name of each 
function. 
 
( Image...

MenuDescription
 
Brightness When OSD is not on the screen, push the button to adjust brightness.
 
 
 
 
  Picture Brightness Contrast MagicBright
  Color MagicColor Color Tone Color Control Color Effect Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Reset Customized 
Key Off Timer Image Size
  Information
 Picture  
 

MenuDescriptionPlay/Stop
Brightness You can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature 
: When OSD is not on the screen, 
push the [   ] button to adjust brightness.  
 
[MENU  →
   →
   →
 ,   →
 MENU]
Contrast You can use the on-screen menus to change the contrast 
according to personal preference.  
 
[MENU 
→
   →
 ,   →
   →
 ,   →
 MENU]
MagicBright Push the   button to circle through available 
preconfigured modes. 
MagicBright is...

 
 
 Color  
MenuDescriptionPlay/Stop
MagicColor  
[MENU →
 ,   →
   →
 →
 ,   →
   →
 MENU]
MagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly without disturbing image 
quality. 
 
1) Off  - Returns to the original mode.
2) Demo  - The screen before applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full  - Displays not only vivid natural color but also 
more...

 [MENU →
 ,   →
   →
 ,   →
   →
 ,   →
 MENU] 
Sepia
- This applies the Sepia color effect to a 
black and white screen.
Gamma Gamma correction changes the luminance of the colors 
with intermediate luminance. zMode 1  
zMode 2  
zMode 3  
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
 
 
 
 
 Image  
Menu DescriptionPlay/Stop
Coarse Removes noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu....

V-Position(Available in analog mode only) 
 [MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
 
 
 
 
 OSD  
Menu DescriptionPlay/Stop
Language You can choose one of 9 languages. 
 
Note
:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer. 
 
[MENU  →
 ,   →
   →
   →
 ,   →
 MENU]
H-Position You can change the horizontal position where the OSD 
menu appears on your monitor. 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
V-Position You can...