Samsung Syncmaster 920t Quick Start Guide

							     
 
7. Click the  Browse button then choose A:(D:\Driver) and
 choose your monitor model in the 
model list and click the  Next button.  
 
     
 
8. If you can see following message window, then click the  Continue Anyway button. Then 
click  OK button. 
 
  
 
9. Click the  Close button, then click 
OK button continually. 
 
 
 
 
This monitor driver is under certified MS logo and this installation doesnt 
damage your system. The certified dr iver will be posted on Samsung 
Monitor homepage.  
http://www.samsung-monitor.com/ . 
 
						

							     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button.  
How to install
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click 
Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this device so that I can choose a 
specific driver  then click 
Next and then click 
Have disk.  
7. Click the  Browse button then choose A:(D:\Driver).  
8. Click the  Open button, then click 
OK button.  
9. Choose your monitor  model and click the 
Next button then click 
Next button.  
10. Click the  Finish button then the 
Close button.  
If you can see the  Digital Signature Not Found window then click the 
Yesbutton. 
And click the  Finish button then the 
Close button. 
Case1: If the Properties button is inactive, it means your monitor is properly configured. 
Please stop installation 
Case2: If the Properties button is active, cli ck the Properties button then follow next steps 
continually.
 
 
   Microsoft® Windows® Millennium Operating System
 
 
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click 
Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the 
Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location..  then click 
Next button.  
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you 
connected to your computer and click  OK.  
11. Continue choosing  Close button and 
OK button until you close the Display Properties 
dialogue box.  
 
 
   Microsoft® Windows® NT Operating System
 
 
1. Click  Start, 
Settings , 
Control Panel , and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display 
Modes .  
3. Select a mode that you wish to use (Resolutio n, Number of colors and Vertical frequency) 
and then click  OK.  
4. Click  Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at  All Dis
play Modes, select the level of re
solution and vertical 
 
						

							frequency by referring to the Preset Timing Modes in the user guide.
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make th e X86Config file, which is a type of system setting file. 
 
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You
 can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can en
ter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not af
fect the actual execution 
of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
 
 Natural Color 
 
Natural Color Software Program
 
 
One of the recent problems in using a computer is  that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very  solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Resear ch Institute (ETRI). 
This system is available only fo r Samsung monitors and makes th e color of the images on the 
monitor the same as the printed or scanned images.  
For more information, re fer to Help (F1) in the software program.  
How to install the Natural Color software  
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 
screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the  [Start] button of Windows and then select 
[Execute].  
Enter D:\color\eng\setup.exe and then press the   key.  
(If the drive where the CD is inserted is not D:\, enter the applicable drive.) 
 
						

							How to delete the Natural Color software program  
Select  [Setting] /
[Control Panel]  on the 
[Start] menu and then double-click 
[Add/Delete a 
program] . 
Select Natural Color from the list and then click the  [Add/Delete] button. 
 
 
 MagicTune™ 
 
 Installation 
 
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicTune™ installation file.  
3. Select installation Language, Click Next. 
 
 
4. When the InstallationShield Wizard window appears, click Next.  
 
 
5. Select I agree to the terms  of the license agreement to accept the terms of use.  
 
						

							  
 
6. Choose a folder to install the MagicTune program. 
 
 
7. Click Install. 
 
 
 
						

							8. The Installationation Status window appears.  
 
9. Click Finish. 
 
 
10. When the installation is complete, the MagicTune 2.5 executable icon appears on your 
desktop.  
 Double-click the icon to start the program. 
 
 
11. The following window appears if the installation is successful.  
 
 
Magictune execution icon may not appear depending on specification of 
computer system or monitor. If  that happens, press F5 Key.
 
 
						

							 
  
 
  Installationation Problems  
The installation of MagicTune™ 2.5 can be affected by such factors as the video card, 
motherboard and the network environment.  
    System Requirements 
OS  
zWindows 98 SE  
zWindows Me  
zWindows NT  
zWindows 2000  
zWindows XP Home Edition  
zWindows XP Professional  
Hardware  
z32MB Memory above  
z25MB Hard disk space above  
          
* For more information , visit the MagicTune website.  
 
 
  
 Uninstall 
 
 
The MagicTune program can be removed only by using the Add or Remove Programs option of 
the Windows Control Panel.  
Perform the following st eps remove MagicTune. 
1. Go to [Task Tray]  [Start]  [Settings] and se lect [Control Panel] in the menu. If the program 
runs on Windows XP, go to [Control  Panel] in the [Start] menu.  
 
2. Click the Add or Remove Programs icon in Control Panel.  
 
3. In the Add or Remove Programs screen, scroll down to find MagicTune. Click on it to  highlight it.  
 
4. Click the Change/Remove button to remove the program. 
 
5. Click Yes to begin the uninstall process.    
6. Wait until the Uninstall Complete dialog box appears.  
Visit the MagicTune  website for technical support for MagicTune , FAQs (questions and answers) 
and software upgrades. 
 
						

							 
 
   
 Troubleshooting 
 
 
MagicTune may not work in case monitor is replaced or driver of graphic card is updated while 
MagicTune is operating. If so , please restart the system.  
    Check when MagicTune does not function properly.   
 
* MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play. 
 
 
 
Visit the MagicTune  website for technical support for MagicTune , FAQs (questions and answers) 
and software upgrades.  
 
 
* To check whether your PC is available for MagicTune feature, follow the steps 
   below (When Windows is XP);   
 
Control Panel -> Perf ormance and Maintenance -> Syst em -> Hardware -> Device 
Manager -> Monitors -> After deleting Plug and Play monitor, find Plug and Play monitor 
by searching new Hardware. 
 
						

							 
 
1.Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. This buttons allows you to adjust items in the menu.
3. This buttons allows you to adjust items in the menu.
4.  This button activates a highlighted menu item.
5.  Press this button to self-adjust to the incoming PC signal. The values of fine,coarse and position 
are adjusted automatically.
 
 AUTO 
 
SyncMaster 720B/721B
 
						

							MenuDescription
AUTO When the 
AUTO button is pressed, the Au
to Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
 
- If Auto Adjustment does not work properly, press Auto button again to 
adjust picture with more accuracy. 
 
- If you change resolution in the co ntrol panel, Auto function will be 
executed automatically. 
 
 OSD Lock & Unlock