Samsung Syncmaster 920t Quick Start Guide

							  
  
  
 
     
Install drivers Install 
programs 
  
  
  
     
 SyncMaster 720B
SyncMaster 720B/720T/920T/721B
 
						

							 
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Grounding to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for extended period of  time, set your computer to DPMS.  
If using a screen saver, set it to the active screen mode.  
 
 
 Do not use a damaged or loose plug. 
zThis may cause an electric shock or fire.    
 
						

							 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause an electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  
  Do not excessively bend the plug and wire nor place heavy objects upon 
them, which could cause damage.   
zThis may cause an electric shock or fire.  
 
 
 
  
  Do not connect too many extension cords or plugs to an outlet.   
zThis may cause fire.  
 
 
 
 
 
  Installation  
  
Put your monitor in a location with low humidity and a minimum of dust. 
zFailure to do so may cause an electric shock or fire inside the monitor.  
 
 
Do not drop the monitor when moving it. 
zThis may cause damage to the product or human body.  
 
 
Place the monitor on a flat and stable surface. 
zThe monitor may cause in jury by falling.  
 
						

							 
 
Set down the monitor carefully. 
zThe monitor could be damaged or broken.  
 
 
Do not place the monitor face down. 
zThe TFT-LCD surface may be damaged.  
 
 
Installing a wall bracket must be done by a qualified professional. 
zInstallation by unqualified personnel may result in injury.  
zAlways use the mounting device specified in the owners manual.  
 
 
Leave a space for ventilation between the product and the wall. 
zPoor ventilation may cause the interior temperature to rise and lead to 
fire.  
 
 
 
 
 
  Clean  
  
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with 
a slightly moistened, soft fabric. 
 
 
Do not spray water or  detergent directly on the monitor. 
zThis may cause damage, electric shock or fire.  
 
 
Use the recommended detergent with a smooth cloth.   
 
 
If the connector between the plug and the pin is dusty or dirty, clean it 
properly with a dry cloth. 
zA dirty connector may cause an  electric shock or fire.  
 
						

							 
 
Contact the Service Center or Customer Center for interior cleaning 
once a year. 
zKeep the products interior clean. Dust which has accumulated in the 
interior over an extended period of time may cause malfunction or fire.  
 
 
 
 
 
  Others  
  
Do not remove cover (or back). 
zThis may cause an electric shock or fire.  
zRefer servicing to qualified service personnel.  
 
 
If your monitor does not operate norma lly - in particular, if there are any 
unusual sounds or smells coming from it - unplug it immediately and 
contact an authorized dealer or service .  
zThis may cause an electric shock or fire.  
 
 
Be careful not to let wate r drip into the monitor or expose the monitor to 
moisture. 
zThis may cause malfunction, an electric shock or fire.  
zEspecially avoid operating the monitor near water or outdoors where it 
could be exposed to snow or rain.  
 
 
If the monitor is dropped or the casing is damaged, turn the monitor off 
and unplug the power cord. 
zThe monitor may malfunction, causing an electric shock or fire.  
zThen contact the  Service Center .  
 
 
Disconnect the plug from the outlet during storms or lightening or if it is 
not used for a long period of time. 
zFailure to do so may cause an electric shock or fire.  
 
 
Do not try to move the monitor by pu lling only the wire or the signal 
cable. 
zThis may cause a breakdown, electric shock or fire due to damage to 
the cable.  
 
						

							 
 
Do not move the monitor right or left by pulling only the wire or the 
signal cable. 
zThis may cause a breakdown, electric shock or fire due to damage to 
the cable.  
 
 
Do not cover the vents on the monitor cabinet. 
zBad ventilation may cause a breakdown or fire.  
 
 
Do not place water containers, chemical products or small metal objects 
on the monitor. 
zThis may cause malfunction, an electric shock or fire.  
zIf a foreign substance enters the monitor, unplug the power cord and 
contact the  Service Center  .  
 
 
Do not use or store inflammable substances near the monitor. 
zThis may cause an explosion or fire.  
 
 
Never insert anything metallic into the monitor openings.   
zThis may cause an electric 
shock, fire or injury.  
 
 
Do not insert metal objects such as ut ensils, wire or drill bits or things 
that catch fire easily, such as pieces  of paper or matches, into the vents, 
the headphone or A/V ports on the monitor. 
zThis may cause malfunction, an electric shock or fire.  
zAlways contact the  Service Center if foreign substances/objects enter 
into the monitor.  
 
If you view a fixed screen for an extended period of time, residual image 
or blurriness may appear. 
zChange the mode to energy save or set a screensaver to moving 
picture when you need to be away  from the monitor for an extended 
period of time.  
 
Be careful when adjusting the stand angle.  
zApplying too much force may cause the monitor topple over or fall, 
resulting in injury.  
zYour hand or finger(s) may get caught between the monitor and the 
 
						

							stand, causing injury.  
 
Adjust the resolution and frequency to the levels appropriate for the 
model. 
zInappropriate resolution may cause undesirable picture quality.  
 17,19 inch - 1280 X 1024 
 
 
Be careful that adapter should no t be in contact with water and 
therefore not be wet.  
zThis may cause malfunction, an electric shock or fire.  
zDo not use adapter by the waterside or outside particularly when it rains 
or snows.  
zBe careful that adapter should not be wet while cleaning floor with 
water. 
 
 
Keep all power adapters apart.  
zFailure to do so may cause fire. 
 
 
Keep power adapter away from any other heat source.  
zFailure to do so may cause fire. 
 
 
Remove and discard vinyl bag from power adapter before use.  
zFailure to do so may cause fire. 
 
Always keep power adapter in well-ventilated area.  
 
Keep the volume at a proper level when you use the headphones.  
zExcessively loud vo
lume levels may damage hearing.  
 
 
Sitting too close to the monitor on a continuous basis may damage 
eyesight. 
 
						

							 
To ease eye strain, take at least a five-minute break after every hour of 
using the monitor. 
 
 
Do not use the monitor where it may be exposed to strong vibrations.  
zExposure to strong vibrations may cause fire and hazard and shorten 
the life of the monitor.  
 
When moving the monito r, turn the power switch off and unplug the 
power cord.  
Make sure that all cables, including the antenna cable and cables 
connected to other devices, are disconnected before moving the 
monitor. 
zFailure to disconnect the cable may damage it and lead to fire or an 
electric shock.    
 
						

							 
 
 
Please make sure the following items are included with your monitor. If an
y items are missing, contact your dealer. 
 
 
 
 
 Unpacking 
   
 Monitor 
 
 
   
 Manual  
 
 
Quick Setup Guide Warranty Card
 
(Not available in all 
locations) Users Guide,  
Monitor Driver,  
Natural Color software,  
MagicTune™ software,   Pivot
® Pro software
 
 
    
 Cable
  
Power Cord  
DC Adapter 
 
 
SyncMaster 720B/721B
 
						

							 
 For Multimedia model (Option) 
 
  Multimedia modelAudio Cable
 
 
 
 
 Front  
 
 
Menu button [ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return 
to the previous menu.  
MagicBright button  
[] 
 
 
 
 MagicBright is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
watching. Currently six different modes are available: Custom, 
Text, Internet, Game, Sport and Movie. Each mode has its own 
pre-configured brightness value. You can easily select one of 
six settings by simply pressing  MagicBright control buttons. 
1) Custom  
Although the values are carefully chosen by our engineers, 
the pre-configured values may not be comfortable to your 
eyes depending on your taste.  
If this is the case, adjust  the Brightness and Contrast by 
using the OSD menu.