Samsung Syncmaster 920t Quick Start Guide

							 
 
 
 
(1) 
 
 
 
(2)  
 
 
 
Caution:  The stand is made of aluminum. Keep it from getting nicked or scratched.
 
						

							 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :   http://www.samsung-monitor.com/  (Worldwide)
http://www.samsungusa.com/monitor  (USA)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsung monitor.com.cn/ (China)
 
  Windows ME 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click  Windows ME Driver .  
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
 
4. Click the  Install button in the 
Warning window. 
 
 
 
5. Monitor driver installation is completed.  
 
 
    Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click  Windows XP/2000 Driver   
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
						

							 
 
4. If you can see following message window, then click the  Continue Anyway button. 
Then click  OK button. 
 
 
 
5. Monitor driver installation is completed. 
 
This monitor driver is under certified MS logo and this installation doesnt 
damage your system. The certified dr iver will be posted on Samsung 
Monitor homepage.  
http://www.samsung-monitor.com/ . 
 
 
Windows XP   |  Windows 2000   |  Windows Me   |  Windows NT   |  Linux   
 
 
When prompted by the operating system fo r the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :   http://www.samsung-monitor.com/  (Worldwide)
http://www.samsungusa.com/monitor  (USA)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsung monitor.com.cn/ (China)
 
  Microsoft® Windows® XP Operating System  
 
1. Insert CD into the CD-ROM driver.  
2. Click  Start —> 
Control Panel  then click the 
Appearance and Themes  icon.  
 
 
						

							     
 
3. Click  Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the  Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click  Update Driver..  and select 
Install from a list or..  then click 
Next button.  
 
     
 
6. Select  Dont search ,I will..  then click 
Next and then click 
Have disk.  
 
 
						

							     
 
7. Click the  Browse button then choose A:(D:\Driver) and
 choose your monitor model in the 
model list and click the  Next button.  
 
     
 
8. If you can see following message window, then click the  Continue Anyway button. Then 
click  OK button. 
 
  
 
9. Click the  Close button, then click 
OK button continually. 
 
 
 
 
This monitor driver is under certified MS logo and this installation doesnt 
damage your system. The certified dr iver will be posted on Samsung 
Monitor homepage.  
http://www.samsung-monitor.com/ . 
 
						

							     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button.  
How to install
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click 
Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this device so that I can choose a 
specific driver  then click 
Next and then click 
Have disk.  
7. Click the  Browse button then choose A:(D:\Driver).  
8. Click the  Open button, then click 
OK button.  
9. Choose your monitor  model and click the 
Next button then click 
Next button.  
10. Click the  Finish button then the 
Close button.  
If you can see the  Digital Signature Not Found window then click the 
Yesbutton. 
And click the  Finish button then the 
Close button. 
Case1: If the Properties button is inactive, it means your monitor is properly configured. 
Please stop installation 
Case2: If the Properties button is active, cli ck the Properties button then follow next steps 
continually.
 
 
   Microsoft® Windows® Millennium Operating System
 
 
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click 
Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the 
Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location..  then click 
Next button.  
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you 
connected to your computer and click  OK.  
11. Continue choosing  Close button and 
OK button until you close the Display Properties 
dialogue box.  
 
 
   Microsoft® Windows® NT Operating System
 
 
1. Click  Start, 
Settings , 
Control Panel , and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display 
Modes .  
3. Select a mode that you wish to use (Resolutio n, Number of colors and Vertical frequency) 
and then click  OK.  
4. Click  Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at  All Dis
play Modes, select the level of re
solution and vertical 
 
						

							frequency by referring to the Preset Timing Modes in the user guide.
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make th e X86Config file, which is a type of system setting file. 
 
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You
 can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can en
ter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not af
fect the actual execution 
of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
 
 Natural Color 
 
Natural Color Software Program
 
 
One of the recent problems in using a computer is  that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very  solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Resear ch Institute (ETRI). 
This system is available only fo r Samsung monitors and makes th e color of the images on the 
monitor the same as the printed or scanned images.  
For more information, re fer to Help (F1) in the software program.  
How to install the Natural Color software  
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 
screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the  [Start] button of Windows and then select 
[Execute].  
Enter D:\color\eng\setup.exe and then press the   key.  
 
						

							(If the drive where the CD is inserted is not D:\, enter the applicable drive.) 
How to delete the Natural Color software program  
Select  [Setting] /
[Control Panel]  on the 
[Start] menu and then double-click 
[Add/Delete a 
program] . 
Select Natural Color from the list and then click the 
[Add/Delete] button. 
 
 
 MagicTune™ 
 
 Installation 
 
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicTune™ installation file.  
3. Select installation Language, Click Next. 
 
 
4. When the InstallationShield Wizard window appears, click Next.  
 
 
 
						

							 5. Select I agree to the terms
 of the license agreement to accept the terms of use.  
 
 
6. Choose a folder to install the MagicTune program. 
 
 
7. Click Install. 
 
 
						

							 
8. The Installationation Status window appears. 
 
 
9. Click Finish. 
 
 
10. When the installation is complete, the MagicTune 2.5 executable icon appears on your  desktop.  
 Double-click the icon to start the program. 
 
 
11. The following window appears if the installation is successful.  
 
 
Magictune execution icon may not appear depending on specification of 
computer system or monitor. If  that happens, press F5 Key.