Samsung Syncmaster 920t Quick Start Guide

MenuDescription
 BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 
 
 Source 
 
MenuDescription
SourceSelects the Video signal while the OSD is off. 
 
 
  Picture Brightness Contrast
  Color (TCO03) MagicColor Color Tone Color Control Gamma
  Color MagicColor Color Tone sRGB Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset
  Information...

MenuDescriptionPlay/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature 
: When OSD is not on the screen, 
push the button to adjust brightness. 
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference. 
 
 
 
 
   Color (TCO03 applied model only) 
 

MenuDescriptionPlay/Stop
MagicColorMagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color 
more clearly without disturbing image 
quality. 
 
Off – Returns to the original mode. 
Demo – The screen before applying MagicColor appears  
on the right and the screen after applying MagicColor 
appears on the left. 
MagicColor1 - Displays vivid na tural color with clearness. 
MagicColor2 - Displays not only vivid natural color but also 
more...

Color ToneThe tone of the color can be changed.
sRGBWhen you adjust the Brightness and Contrast after sRGB 
mode is selected, sRGB mode exits.
Color ControlAdjusts individual 
R,G,B color balance.
GammaAdjusts the gamma value.
 
 
 
 
   Image 
MenuDescriptionPlay/Stop
Coarse Removes noise such as ve
rtical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the Horizontal Control menu.
(Available in analog Mode Only)
Fine  
Removes noise such as horizo...

   OSD 
MenuDescriptionPlay/Stop
LanguageYou can choose one of the seven languages. (English, 
German, Spanish, French, Italian, Swedish, Russian) 
Note
:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer.
H-PositionYou can change the horizontal position where the OSD 
menu appears on your monitor.
V-Position You can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the transparency of the...

MenuDescriptionPlay/Stop
Auto SourceSelect 
Auto Source  for the monitor to 
automatically select 
the signal source.
Image ResetImage parameters are replaced with the factory default 
values.
Color Reset Color parameters are replaced with the factory default 
values.
 
 
 
 
   Information 
 

MenuDescription
InformationShows a video source, display mode on the OSD screen. 
 

 
 
Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do  need assistance, please call the phone number on the 
Information section or contact your dealer .
 
 
SymptomCheck ListSolutions
No images on the 
screen. I cannot turn 
on the monitor.Is the power cord connected 
properly?Check the power cord connection 
and supply.
Can you see  Check Signal Cable  
on the screen? Check the signal cable connection.
If the power is on, reboot...

(The message is displayed again if 
the system is rebooted.) 
There is no image on the screen.  
Is the power indicator on the monitor 
blinking at 1 second intervals?The monitor is in PowerSaver mode. 
 
Press any key on the keyboard to 
activate the monitor and restore the 
image on the screen. 
I cannot see the On 
Screen Display.Have you locked the On Screen 
Display (OSD) Menu to prevent 
changes?Unlock the OSD by pressing the 
MENU button for at least 5 seconds.
The screen shows 
strange colors or...

 
turning the control to its maximum, 
check the volume control on the 
computer sound card or software 
program.
 
 
 
 Check the following items if there is trouble with the monitor.  
1. Check if the power cord and the video cables are properly connected to the computer.  
2. Check if the computer beeps more than 3 times when booting. 
(If it does, request an after-service for the main board of the computer.)  
3. If you installed a new video card or if you assembled the PC, check if the installed...