Samsung Syncmaster 920t Quick Start Guide

 
  
 
  Installationation Problems  
The installation of MagicTune™ 2.5 can be affected by such factors as the video card, 
motherboard and the network environment.  
    System Requirements 
OS  
zWindows 98 SE  
zWindows Me  
zWindows NT  
zWindows 2000  
zWindows XP Home Edition  
zWindows XP Professional  
Hardware  
z32MB Memory above  
z25MB Hard disk space above  
          
* For more information , visit the MagicTune website.  
 
 
  
 Uninstall 
 
 
The MagicTune program can be removed only by...

 
 
   
 Troubleshooting 
 
 
MagicTune may not work in case monitor is replaced or driver of graphic card is updated while 
MagicTune is operating. If so , please restart the system.  
    Check when MagicTune does not function properly.   
 
* MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play. 
 
 
 
Visit the MagicTune  website for technical support for MagicTune , FAQs (questions and answers) 
and software upgrades.  
 
 
* To check whether your PC is available...

 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
2-3.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using...

 
 
   Pivot Stand 
Pivot Pro Installation
 Caution : When Pivoting the monitor, the corner of th
e monitor may reach to the floor. Tilt the 
monitor backward more than 45 degrees and then Pivot it. Failure to do so may damage 
the monitor.
 
 
   Installing a VESA base  
 
 
  
 
 
 
Sold separately 
 
 
1. Bracket 
(Set-Mount) 2. Bracket 
(Wall-Mount)
   
3. Anchors (3EA)  4. Screws (3EA) 
(Wall-Mount)5. Screws (4EA)
 
 
(Contact a local Samsung Electronics  service center to buy optional items.)...

 
 
 
2. Installing the set-mount bracket  
 
 
(1)  
Fold the base and put the set-mount bracket into it. Align the set-mount interface holes with the holes 
in the base 
A and secure it tightly with 2 screws. 
 
 
 
(2) 
 

Fold the base and lay the area connected to cable face-down before putting the set-mount bracket into 
it. Align the set-mount interface holes with the holes in the base B and secure it tightly with 4 screws. 
 
 
 
(3)   This monitor accepts a 75mm x 75mm VESA
-compliant mounting interface pad. 
A. Monitor  
 
B.  Mounting interface pad  
 
Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with four 
screws that came with the arm-type base , wall mount hanger...

 
 
 
 
(1) 
 
 
 
(2)  
 
 
 
Caution:  The stand is made of aluminum. Keep it from getting nicked or scratched.
 

 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :   http://www.samsung-monitor.com/  (Worldwide)
http://www.samsungusa.com/monitor  (USA)
http://www.sec.co.kr/monitor...

 
 
4. If you can see following message window, then click the  Continue Anyway button. 
Then click  OK button. 
 
 
 
5. Monitor driver installation is completed. 
 
This monitor driver is under certified MS logo and this installation doesnt 
damage your system. The certified dr iver will be posted on Samsung 
Monitor homepage.  
http://www.samsung-monitor.com/ . 
 
 
Windows XP   |  Windows 2000   |  Windows Me   |  Windows NT   |  Linux   
 
 
When prompted by the operating system fo r the monitor...

     
 
3. Click  Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the  Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click  Update Driver..  and select 
Install from a list or..  then click 
Next button.  
 
     
 
6. Select  Dont search ,I will..  then click 
Next and then click 
Have disk.