Samsung Syncmaster 920lm Quick Start Guide

							 
Quick Setup GuideWarranty Card/ 
Registration Card 
(Not available in all 
locations)Users Guide, 
Monitor Driver
 
 
  
 
 Cable
  
D-sub Cable  Power Cord  
 
 
 
 Front 
 
 
 
MENU button [ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return to 
the previous menu.  
MagicBright™  
[] 
 
 
 
 MagicBright™ is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
watching. Currently four different modes are available: Custom, 
Text, Internet, and Entertain. Each mode has its own pre-
configured brightness value. You can easily select one of four 
settings by simply pressing MagicBright™ control button. 
1) Custom 
Although the values are carefully chosen by our engineers, the 
pre-configured values may not be comfortable to your eyes 
depending on your taste. 
If this is the case, adjust the brightness and contrast by using 
the OSD menu. 
2) Text : Normal brightness 
For documentations or works involving heavy text.
 
						

							 
 
   3) Internet : Medium brightness 
For working with a mixture of images such as text and graphics.
4) Entertain : High brightness 
For watching motion pictures such as a DVD or VCD.
>>Click here to see an animation clip 
Brightness button 
[]When OSD is not on the screen, push the button to adjust 
brightness.
Adjust buttons [ ]Adjust items in the menu.
Enter button [ ]  Activates a highlighted menu item. 
AUTO button 
[ AUTO ]Use this button for auto adjustment.
Power button [ ]/  
Power indicator Use this button for turning the monitor on and off. 
This light glows blue during normal operation, and blinks blue once 
as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving 
functions. For energy conservation, turn your monitor OFF when it is not needed, or when 
leaving it unattended for long periods.
 
 
 
   
 
Rear 
Simple stand 
(The configuration at the back of the monitor may vary from product to product.)  
  
 
POWER portConnect the power cord for your monitor to the power port on the back 
of the monitor.
RGB IN portConnect the signal cable to the 15-pin, D-sub port on the back of your 
monitor. 
Kensington Lock 
 The Kensington lock is a device used to physically fix the system 
when using it in a public place. (The locking device has to be 
purchased separately. )  
For usin
g a locking device, contact where you purchase it. 
See Connecting the Monitor for further information regarding cable connections.
 
						

							 
 
 Connecting the Monitor 
1. Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2. Use a connection appropriate for your computer.
  2-1.Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. 
 
[ RGB IN ]  
2-2. Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-sub connection cable.
Turn on your computer and monitor. If your monitor displays an image, installation is 
completed.
  
 
 
 Using the Stand 
 
						

							 
   Monitor Assembl
y 
Monitor and Bottom  
 
 
   Attaching a Base 
    This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
Simple stand
A. Monitor  
 
B. Mounting interface pad (Sold separately) 
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove screws and then remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it 
with four screws that came with the arm-type base, wall mount hanger or other base. 
 
 
 Installing the Monitor Driver (Automatic) 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
 
						

							included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
below. 
 
zInternet web site :  http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)
 
1. Insert CD into the CD-ROM drive.  
2. Click 
Windows  
3. Choose your monitor model in the model list, then click the 
OK button. 
 
 
 
4. If you can see following message window, then click the 
Continue Anyway button. 
Then click 
OK button. (Microsoft
® Windows® XP/2000 Operating System) 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation 
doesntdamage your system.The certified driver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/. 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have. 
 
 
						

							Prepare a blank disk and download the driver program file at the Internet web site shown 
below. 
 
zInternet web site :  http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)
Microsoft® Windows Vista™ Operating System  
 
1. Insert your Manual CD into your CD-ROM drive.
2. Click  (Start) and Control Panel. Then, double-click on Appearance and 
Personalization.  
 
 
   
3. Click Personalization and then Display Settings.  
 
 
   
4. Click Advanced Settings….  
  
 
5. Click Properties in the Monitor tab. If the Properties button is deactivated, it means 
the configuration for your monitor is completed. The monitor can be used as is. 
If the message “Windows needs…” is displayed, as shown in the figure below,  
click Continue. 
    
 
						

							 
 
This monitor driver is under certifying MS logo, and this installation doesnt 
damage your system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
6. Click Update Driver… in the Driver tab.  
 
 
   
7. Check the Browse my computer for driver software checkbox and click Let me pick 
from a list of device drivers on my computer.  
 
 
   
8. Click Have Disk… and select the folder (for example, D:\Drive) where the driver setup 
file is located, and click OK.  
 
   
9.
Select the model that matches your monitor from the list of monitor models on the 
screen, and click Next.  
 
						

							  
 
10. Click Close
→ Close 
→ OK 
→ OK on the following screens displayed in sequence. 
   
   
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click 
Start —> 
Control Panel then click the 
Appearance and Themes Icon.  
 
     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced... 
 
 
						

							     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
 
						

							     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be posted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the 
Close button then click 
OK button continually. 
 
 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
O
K button.  
How to install