Samsung Syncmaster 920bm Quick Start Guide

Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
[MENU→
  →
  →
 ,  →
 MENU]
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference.  
 
[MENU→
  →
 ,  →
  →
 ,  →
 MENU]
 
 
 
 
 Color  
 

Menu Description Play/Stop
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.  
[MENU→
 ,  →
  →
 →
 ,  →
 MENU]
Cool- Makes whites bluish.
Normal- Keeps whites white.
Warm- Makes whites reddish.
Custom- Select this mode when you want to adjust 
the image according to your preferences.
Color ControlAdjusts individual R,G,B color balance. 
 [MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
GammaGamma correction changes the luminance of the...

 [MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
SharpnessChanges the clearance of image. 
 [MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
H-PositionChanges the horizontal position of the monitors entire 
display. 
(Available in analog mode only)  
 
[MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
V-PositionChanges the vertical position of the monitors entire 
display. 
(Available in analog mode only)  
 
[MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
 
 
 
 
 OSD  
Menu Description Play/Stop
LanguageYou can choose one of 9 languages....

[MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
TransparencyChange the transparency of the background of the OSD. 
 [MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
Display TimeThe menu will be automatically turned off if no adjustments 
are made for a certain time period.  
You can set the amount of time the menu will wait before it 
is turned off. 
5 sec, 10 sec, 20 sec, 200 sec 
 
[MENU→
 ,  →
 →
 ,  →
 →
 ,  →
 MENU]
 
 
 
 
 Setup  
Menu Description Play/Stop
Auto SourceSelect 
Auto Source for the monitor to...

Menu Description
InformationShows a video source, display mode on the OSD screen.  
 
[MENU →
 ,  →
 MENU]
 

 
 
 
 Check List 
Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do need assistance, please call  the phone number on the 
Information section or contact your dealer .
 
 
Symptom Check List Solutions
No images on the 
screen. I cannot turn 
on the monitor. Is the power cord connected 
properly?
Check the power cord connection 
and supply.
Can you see  Check Signal Cable  
on the screen?  (Connected using the D-sub 
cable)...

Hz, a 
Not Optimum 
Mode,Recommended mode 
1280 x 1024 60 Hz message is 
displayed. If the display exceeds 85 
Hz, the display will work properly but 
the 
Not Optimum 
Mode,Recommended Mode 
1280 x 1024 60 Hz message 
appears for one minute and then 
disappears.  
Please change to the recommended 
mode during this one-minute period. 
 
(The message is displayed again if 
the system is rebooted.) 
There is no image on the screen.  
Is the power indicator on the monitor 
blinking at 1 second intervals?The...

 
 
product.) 
There are only 16 
colors shown on the 
screen. 
The screen colors 
have changed after 
changing the video 
card. Have the Windows colors been set 
properly? 
Windows ME/2000/XP: 
Set the colors properly at the 
Control Panel 
→
 Display  →
 
Settings . 
Has the video card been set 
properly? Set the video card by referring to the 
video card manual. 
There is a message 
that reads 
Unrecognized 
monitor, Plug & Play 
(VESA DDC) monitor 
found.  Have you installed the monitor 
driver?...

How can I set the Power Saving 
function?Windows ME/XP/2000 : Set the function at BIOS-SETUP of the 
computer or the screen saver. (Refer to Windows/Computer 
Manual).  
How can I clean the outer 
case/LCD Panel?Disconnect the power cord and then clean the monitor with a soft 
cloth, using either a cleaning solution or plain water.  
 
Do not leave any remains of the detergent nor scratch the case. 
Do not allow any water to go inside the monitor. 
 
 
 Self-Test Feature Check 
Self-Test Feature Check  |...

 
 
 Useful Tips 
 
zA monitor recreates visual signals received from the computer. Therefore, if there is trouble with 
the computer or the video card, this can cause the monitor to become blank, have poor coloring, 
noise, Video mode not supported, etc. In this case, first check the source of the problem, and 
then contact the Service Center or your dealer.  
 
zJudging the monitors working condition  
If there is no image on the screen or a 
Not Optimum Mode,Recommended Mode 1280 X 
1024 60 Hz message...