Samsung Syncmaster 920bm Quick Start Guide

Ex)
The best way to protect your monitor from Image retention is to set your PC or 
S
ystem to operate a Screen Saver program when you are not using it.
Image retention may not occur when a LCD panel is operated under normal conditions. 
 
Normal conditions are defined as continuously changing video patterns. When the LCD 
panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be 
slight difference in voltage between electrodes that work the liquid crystal (LC) in a 
pixel....

 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer. 
Contact a local deale
rto buy optional items.   
 
 
 
 
 Unpacking 
   
 Without stand 
 
  Monitor
  
 With stand 
 
  Monitor & Simple Stand
 
 
  
 Manual  
 

Quick Setup GuideWarranty Card/ Registration 
Card 
(Not available in all locations)Users Guide, 
Monitor Driver
 
 
  
 
 Cable
   
RGB Cable  Power Cord Audio Cable
 
 
DVI Cable 
(option)  
 
 
 
 Front 
 
 
MENU button  
[MENU/ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return to 
the previous menu.  
MagicBright™  
[] MagicBright™ is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
 

 
 
     
 
 
 watching. Currently six different modes are available: Custom, Text, 
Internet, Game, Sport and Movie. Each mode has its own pre-
configured brightness value. You can easily select one of six 
settings by simply pressing MagicBright™ control button. 
1) Custom 
  Although the values are carefully chosen by our engineers, the 
pre-configured values may not be comfortable to your eyes 
depending on your taste.  
  If this is the case, adjust the brightness and contrast by using 
the OSD...

 
 
  
  
  
  
(The configuration at the back of the monitor may vary from product to product.)   
  
 
 
 
 Headphone connection terminal 
See  Connecting the Monitor  for further information regarding cable connections.
(The configuration at the back of the monitor may vary from product to product.)   
  
 
POWER port Connect the power cord for your monitor to the power port on the back 
of the monitor.
RGB IN portConnect the signal cable to the 15-pin, D-sub port on the back of your 
monitor. 
DVI IN...

 
 
 Connecting the Monitor 
1. Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2. Use a connection appropriate for your computer.
  2-1.Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. 
 
[DVI IN (HDCP)]  
2-3. Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-sub connection cable.
If the...

 
 
 Using the Stand 
 
   Monitor Assembly 
Monitor and Bottom  
 
 
   Attaching a Base 
    This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
A. Monitor  
 
B. Mounting interface pad (Sold separately) 
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove screws and then remove the stand from the LCD monitor.  
4.
Align the mounting interface pad with the...

Do not fasten the screws too tightly, as this may damage the product or cause the product 
to fall, leading to personal injury. 
Samsung is not liable for these kinds of accidents. 
zSamsung is not liable for product damage or personal injury when a non-VESA or non-
specified wall mount is used or the consumer fails to follow the product installation 
instructions.  
  
zTo mount the monitor on a wall, you should purchase the wall mounting kit that allows you 
to mount the monitor at least 10cm away from...

 
5. Monitor driver installation is completed.  
doesntdamage your system.The certified driver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/. 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions...

  
 
5. Click 
Properties in the 
Monitor tab. If the 
Properties button is deactivated, it 
means the configuration for your monitor is completed. The monitor can be used as is. 
If the message “
Windows needs…” is displayed, as shown in the figure below,  
click 
Continue. 
 
 
    
This monitor driver is under certifying MS logo, and this installation doesnt 
damage your system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
6. Click 
Update Driver… in...