Samsung Syncmaster 920bm Quick Start Guide

  
  
  
  
  
  
  
  
  
  
  
  
  
   
     
 
 
 
Install drivers     
  
        
 
     
   
   
 
SyncMaster 920BM
 

 
 
  Notational 
  
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
the equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Ground to prevent an electric shock 
 
 
 
 
 
  Power 
  
When  not used for an extended  period of time, set  your  computer to DPM.  
If using a screen saver, set it to active screen mode.  
 
The images here are for reference only,...

 
 
 Do not use a damaged or loose plug. 
zThis may cause electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.
(Class l Equipment only.)  
 
 
 
  Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug...

  
 
 
 
 
  Installation  
  Be sure to contact an authorized Service Center, when installing your monitor in 
a location with heavy dust, high or low temperatures, high humidity, and exposed 
to chemical substances and where it operates for 24 hours such as at airports, 
train stations etc. 
 
Failure to do so may cause serious damage to your monitor. 
 
 
Place your monitor in a location with low humidity and a minimum of 
dust. 
zFailure to do so may cause electric shock or fire inside the monitor....

 
 
Keep any heating devices away from the power cable. 
zA melted coating may lead to electric shock or fire.  
 
 
Do not install the product in places with poor ventilation, for instance, a 
bookshelf, closet, etc. 
zAny increase in the internal temperature may cause fire.  
 
 
Put down the monitor carefully. 
zFailing to do so may damage the monitor.  
 
 
Do not place the monitor face down. 
zThis may damage the TFT-LCD surface.The installation of the bracket 
must be done by a qualified...

a slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly onto the monitor. 
zThis may cause damage, electric shock or fire.  
 
 
Use the recommended detergent with a smooth cloth.  
 
 
If the connector between the plug and the pin is dusty or dirty, clean it 
properly using a dry cloth. 
zA dirty connector may cause electric shock or fire.  
 
 
Make sure to unplug the power cord before cleaning the product. 
zOtherwise, this may cause electric shock or fire.  
 
 
Unplug the...

unusual sound or smell coming from the monitor - unplug it immediately 
and contact an authorized dealer or the Service Center.  
zThis may cause electric shock or fire.  
 
 
Keep the product away from places exposed to oil, smoke or moisture; 
do not install inside a vehicle. 
zThis may cause a malfunction, electric shock or fire.  zIn particular, avoid operating the monitor near water or outdoors where 
the monitor could be exposed to snow or rain.  
 
 
If the monitor is dropped or the casing is...

 
 
Never insert anything metallic into the monitor openings.  
zThis may cause electric shock, fire or injury.  
 
 
Do not insert metal objects such as chopsticks, wire and tools or 
inflammable objects such as paper or matches into the vent, headphone 
port or AV ports or etc. 
zThis may cause electric shock or fire. If an alien substances or water 
enters the product, turn the product off, unplug the power connector 
from the wall outlet and contact the Service Center.  
 
 
When viewing a fixed...

connected to other devices, are disconnected before moving the 
monitor. 
zFailure to disconnect cables may damage it and cause fire or electric 
shock.   
 
Place the product out of childrens reach, as they could damage by 
hanging onto it. 
zA falling product may cause injury to the person or even fatality.  
 
 
When not using the product for an extended period of time, keep the 
product unplugged. 
zOtherwise, this may cause heat emission from the accumulated dirt or 
degraded insulation, causing...

PRODUCT INFORMATION (Image Retention Free) 
 
LCD Monitors and TVs may have image retention when switching from one image to another 
especially after displaying a stationary image for a long time.  
This guide is to demonstrate correct usage of LCD products in order to protect them from Image 
retention.  
 
WarrantyWarranty does not cover any damage caused by image retention.  
Burn-in is not covered by the warranty. 
What is Image retention ? 
During normal operation of a LCD panel, pixel image...