Samsung Syncmaster 913tm Quick Start Guide

							Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference. 
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference. 
 
 
 
 
 Color   
Menu Description Play/Stop
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.
Color ControlFollow these steps to adjust individual R,G,B color 
balance.
GammaSelect one of three pre-defined gammas.
 
 
 
 
 Image   
 
						

							Menu Description Play/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the Horizontal Control menu.
(Available in analog Mode Only)
Fine Removes noise such as horizontal stripes. If the noise 
persists even after Fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog Mode Only)
SharpnessChanges the clearance of image.
H-PositionChanges the horizontal position of the monitors entire 
display. 
(Available in analog Mode Only)
V-PositionChanges the vertical position of the monitors entire 
display. 
(Available in analog Mode Only)
 
 
 
 OSD   
 
						

							Menu Description Play/Stop
LanguageChange the language used in the menu. You can choose 
one of the seven languages. 
Note:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer.
H-PositionYou can change the horizontal position where the OSD 
menu appears on your monitor.
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the transparency of the background of the OSD.
Display TimeThe menu will be automatically turned off if no adjustments 
are made for a certain time period. You can set the 
amount of time the menu will wait before it is turned off.
 
 
 
 
 Setup   
 
						

							Menu Description Play/Stop
Auto SourceSelect 
Auto Source for the monitor to automatically select 
the signal source.
Image ResetImage parameters are replaced with the factory default 
values.
Color ResetColor parameters are replaced with the factory default 
values.
 
 
 
 
 Information   
Menu Description
 
						

							InformationShows a video source, display mode on the OSD screen. 
 
						

							       Overview     |    Installation     |    OSD Mode    |    Color 
Calibration   |    Uninstall     |    Troubleshooting       
 
 Overview 
 
 
 
 What is MagicTune™? 
Monitor performance can vary due to the graphics card, host computer lighting conditions and other 
environmental factors.  In order to get the best image on a monitor requires you to adjust it for your unique 
setting.  Unfortunately, the manual controls available to tune the image often prove to be challenging.  Proper 
adjustment (tuning) requires an easy to use program that goes through a step-by-step process to obtain the 
best overall picture quality.  
In most cases even simple adjustments to Brightness, or Contrast require navigation of the multi-level, on-
screen display (OSD) menus that are not easy to understand.  Furthermore, there is no feedback to assist in 
correctly setting the controls of the monitor.  MagicTune is a software utility that guides you through the tuning 
process with easy to understand instructions and back ground patterns designed for each monitor control. The 
display settings for each user can be saved, providing an easy way to select display characteristics in a multi-
user environme or having a single user have multiple defined presets based on content and ambient lighting.  
 
 
 Basic Functionality 
MagicTune is a software utility that allows monitor adjustment and color tuning using the Display Data 
Channel Command Interface (DDC/CI) protocol.   All adjustments to the display are controlled via software 
to eliminate the need to use the monitor on-screen display (OSD).   
MagicTune supports Windows™ 98 SE, Me, 2000, XP Home, and XP Professional.  
It is recommended using MagicTune in Windows™ 2000 or later. 
  MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor 
configurations that are best suited for you.  
 
 
 OSD Mode 
The OSD mode allows easy adjustment of monitor settings without taking pre-defined steps. You can access the 
desired menu item to set with ease.  
  
 
						

							       Overview    |    Installation     |    OSD Mode    |    Color 
Calibration   |    Uninstall    |    Troubleshooting       
 
 Installation  
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicTune™ installation file.  
3. Select installation Language, Click Next. 
 
 
4. When the InstallationShield Wizard window appears, click Next.  
 
 
5. Select I agree to the terms of the license agreement to accept the terms of use.  
 
						

							 
 
6. Choose a folder to install the MagicTune program. 
 
 
7. Click Install. 
 
 
8. The Installation Status window appears. 
 
						

							 
 
9. Click Finish. 
 
 
10. When the installation is complete, the MagicTune executable icon appears on your desktop.  
 
Double-click the icon to start the program. 
 
 
 Installation Problems  
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network 
environment.  
See 
Troubleshooting if you have trouble during installation.  
 System Requirements 
 
Magictune execution icon may not appear depending on specification of computer 
system or monitor. If that happens, press F5 Key.
 
 
 
						

							OS 
zWindows™ 98 SE  zWindows™ Me  zWindows™ 2000  zWindows™ XP Home Edition  zWindows™ XP Professional  
Hardware 
z32MB Memory above  z25MB Hard disk space above  
          
* For more information, visit the MagicTune 
website.  
 
It is recommended using MagicTune in Windows™ 2000 or later.