Samsung Syncmaster 913tm Quick Start Guide

							1. Insert CD into the CD-ROM drive.  
2. Click 
Windows XP/2000 Driver  
3. Choose your monitor model in the model list, then click the 
OK button. 
 
 
 
4. If you can see following message window, then click the 
Continue Anyway button. 
Then click 
OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certified MS logo,and this installation doesnt 
damage your system.The certified driver will be posted on Samsung 
Monitor homepage.  
http://www.samsung.com/.
 
 
Windows XP | Windows 2000 |Windows Me |Windows NT | Linux  
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :  http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click 
Start —> 
Control Panel then click the 
Appearance and Themes Icon.  
 
 
						

							     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
 
						

							     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
     
 
8. If you can see following message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be posted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the 
Close button then click 
OK button continually. 
 
 
 
 
						

							     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings tab and then click 
Advanced...  
4. Choose 
Monitor.  
5. Click 
Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose 
Display a list of the known drivers for this device so that I can choose a 
specific driver then click 
Next and then click 
Have disk.  
7. Click the 
Browse button then choose A:(D:\Driver).  
8. Click the 
Open button, then click 
OK button.  
9. Choose your monitor model and click the 
Next button then click 
Next button.  
10. Click the 
Finish button then the 
Close button.  
If you can see the 
Digital Signature Not Found window then click the 
Yesbutton. 
And click the 
Finish button then the 
Close button.  Case1: If the Properties button is inactive, it means your monitor is properly configured. 
Please stop installation 
Case2: If the Properties button is active, click the Properties button then follow next steps 
continually.
 
 
   Microsoft® Windows® Millennium Operating System 
 
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click 
Display icon.  
3. Select the 
Settings tab and click 
Advanced Properties button.  
4. Select the 
Monitor tab.  
5. Click the 
Change button in the 
Monitor Type area.  
6. Choose 
Specify the location of the driver.  
7. Choose 
Display a list of all the driver in a specific location.. then click 
Next button.  
8. Click the 
Have Disk button  
9. Specify A:\(D:\driver) then click 
OK button.  
10. Select 
Show all devices and choose the monitor that corresponds to the one you 
connected to your computer and click 
OK.  
11. Continue choosing 
Close button and 
OK button until you close the Display Properties 
dialogue box.  
 
 
   Microsoft® Windows® NT Operating System 
 
1. Click 
Start, 
Settings, 
Control Panel, and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click 
All Display 
Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) 
and then click 
OK.  
4. Click 
Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at 
All Dis
play Modes, select the level of resolution and vertical 
 
						

							frequency by referring to the Preset Timing Modes in the user guide.
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make th e X86Config file, which is a type of system setting file. 
 
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You
 can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can en
ter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not af
fect the actual execution 
of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
 
 Natural Color 
 
Natural Color Software Program
 
 
One of the recent problems in using a computer is  that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very  solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Resear ch Institute (ETRI). 
This system is available only fo r Samsung monitors and makes th e color of the images on the 
monitor the same as the printed or scanned images.  
For more information, re fer to Help (F1) in the software program.  
How to install the Natural Color software  
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 
screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the [Start] button of  Windows and then select [Execute].  
Enter D:\color\eng\setup.exe and then press the  key.  
(If the drive where the CD is inserted is not D:\, enter the applicable drive.) 
 
						

							How to delete the Natural Color software program 
Select 
Setting/Control Panel on the 
Start menu and then double-click 
Add/Delete a 
program. 
Select Natural Color from the list and then click the 
Add/Delete button. 
 
						

							 
 
Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
This buttons allows you to adjust items in the menu.
Press this button activates a highlighted menu item.
Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically. 
 
						

							MenuDescription
AUTO  When the 
AUTO button is pressed, the Au
to Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog Mode Only) 
 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
zIf Auto Adjustment does not work properly, press Auto button again to 
adjust picture with more accuracy.  
zIf you change resolution in the control panel, Auto function will be 
executed automatically. 
 
 
 
 MagicBright™ 
 AUTO 
 
						

							 
Menu Description
MagicBright™MagicBright OSD Menu will be on screen when you press the MagicBright 
button.  
And then you can choose one of Custom/Text/Internet/Entertain modes 
using [up( ) or down( )] button. 
 
 
 Volume  
 
Menu Description
Volume When OSD is not on the screen, push the button to adjust volume. 
 
 
 Source 
 
						

							 
Menu Description
SourceSelects the Video signal while the OSD is off. 
 
 
1. Picture 
Brightness Contrast
2. Color 
Color Tone Color Control Gamma  
3. Image 
Coarse Fine Sharpness H-Position V-Position
4. OSD 
Language H-Position V-Position Transparency Display Time
5. SETUP 
Auto Source Image Reset Color Reset
6. Information 
 Picture