Samsung Syncmaster 913bm Quick Start Guide

 
 
9. Click Finish. 
Have to reboot the system in order for the MagicRotation to work properly. 
 
 
10. When the installation is complete, the MagicRotation executable icon appears on your desktop.  
 
 
 
 Installation Problems  
The installation of MagicRotation can be affected by the factors such as video card, motherboard and the 
network environment.  
See 
Troubleshooting if you have trouble during installation.  
 Limitation 
1. The Display Driver should be properly loaded for the MagicRotation...

{Close the application.  {Select the Orientation (90, 180, 270) you want to view the application.  {Relaunch the application.  
In most cases this should fix the problem.  
 
3. User Applications using OpenGL and DirectDraw (3D  drawing) will not function as per the orientation 
mode selected (90, 180, 270). 
e.g. 3D games  
 
4. DOS based applications in Full Screen Mode will not function as per the orientation mode selected  (90, 180, 270).  
 
5. Dual is not supported in Windows™ 98, ME, NT 4.0....

 
 
Overview |  Installation  |  Interface  |  Uninstall  | Troubleshooting  
 zWhen Rotation is functioning, portion of MagicTune™ program may not 
operate normally.  
zAutoRotation : The screens display will automatically rotate when the 
monitor is rotated. 
  
To execute Auto Rotation, it should be done as below.   
zPlease install both MagicRotation and MagicTune™ 3.6 programs in your 
computer.  
zLaunch MagicTune 3.6  zOption → Preference  → Click the small box in the  enable task tray 
menu ....

 Rotate to 90 : Display will be rotated 90 degrees from the current angle. 
 Rotate to 180  : Display will be rotated 180 degrees from the current angle. 
 

 Rotate to 270 : Display will be rotated 270 degrees from the current angle. 
 
 
 Hot key  : Hot Keys are available by default and can be changed by user. 
It can be assigned by user directly with keyboard after changing the existing 
HotKey . User can create the hot key with the combination of Shift, Ctrl, Alt and 
general keys. In case only general key is pressed, it will be assigned in the form of 
Alt+general key. 
 Help  : Shows the HELP of MagicRotation program. 
 About  : Shows the version and...

Overview |  Installation
 |  Interface
 |  Uninstall  | Troubleshooting
 
 
 Uninstall 
The MagicRotation program can be removed only by  using the Add/Remove Programs option of the 
Windows™ Control Panel.  
Perform the following steps to remove MagicRotation. 
1. Go to [Task Tray]  [Start]  [Settings]  and select [Control Panel] in the menu.  
If the program runs on Windows™ XP, go to  [Control Panel] in the [Start] menu.  
 
2. Click the Add/Remove Programs icon in Control Panel.  
 
3. In the...

Overview |  Installation 
|  Interface
 |  Uninstall
 | Troubleshooting  
 
 Troubleshooting 
 Before You Call Technical Support 
 zMagicRotation Software works with the installed  Display Driver supplied by your Graphic Card 
Vendor to provide screen rotation capabilities. If the installed Display Driver is working incorrectly 
or has bugs in it, then these bugs would still exis t even after MagicRotation Software is installed. 
Any incorrect/random behaviour resulting due to pr oblems in the installed...

    
 
 
Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do  need assistance, please call the phone number on the 
Information section or contact your dealer .
 
 
Symptom Check List Solutions
No images on the 
screen. I cannot turn 
on the monitor. Is the power cord 
connected properly?
Check the power cord connection 
and supply.
Can you see  Check 
Signal Cable  on the 
screen?  (When connecting D-Sub cable)
 
Check the signal...

85Hz, the display will work properly 
but the 
Not Optimum 
Mode,Recommended Mode 
1280 x 1024 60Hz message 
appears for one minute and then 
disappears.  
Please change to the recommended 
mode during this one-minute period. 
 
(The message is displayed again if 
the system is rebooted.) 
There is no image on the 
screen.  
Is the power indicator on 
the monitor blinking at 1 
second intervals?The monitor is in PowerSaver mode. 
 
press a key on the keyboard to 
activate the monitor and restore the...

 
have changed after 
changing the video 
card.Has the video card been 
set properly?Set the video card by referring to the 
video card manual. 
There is a message 
that reads 
Unrecognized 
monitor, Plug & Play 
(VESA DDC) monitor 
found. Have you installed the 
monitor driver?Install the monitor driver according 
to the Driver Installation Instructions.
See the video card 
manual to see if the Plug 
& Play (VESA DDC) 
function can be supported. Install the monitor driver according 
to the Driver...