Samsung Syncmaster 913bm Quick Start Guide

For more information, refer to Help (F1) in the software program.  
How to install the Natural Color software 
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 
screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the [Start] button of Windows and then select [Execute]....

    
 
 
Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
This button allows you to adjust items in the menu.
Press this button to activate a highlighted menu item.
Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically. 
 AUTO 
 

Menu Description
AUTO When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog Mode Only) 
 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
zIf Auto Adjustment does not work properly, press Auto button again to...

 
Menu Description
MagicBright™MagicBright OSD Menu will be on screen when you press the MagicBright 
button.  
And then you can choose one of Custom/Text/Internet/Entertain modes 
using [up( ) or down( )] button. 
 
 
 Volume  
 
Menu Description
Volume When OSD is not on the screen, push the button to adjust volume. 
 
 
 Source 
 

 
Menu Description
SourceSelects the Video signal while the OSD is off. 
 
 
1. Picture 
Brightness Contrast
2. Color 
Color Tone Color Control Gamma  
3. Image 
Coarse Fine Sharpness H-Position V-Position
4. OSD 
Language H-Position V-Position Transparency Display Time
5. SETUP 
Auto Source Image Reset Color Reset
6. Information 
 Picture   
 

Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference. 
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference. 
 
 
 
 
 Color   
Menu Description Play/Stop
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.
Color ControlFollow these steps to adjust individual R,G,B color 
balance.
GammaSelect one of three pre-defined...

Menu Description Play/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the Horizontal Control menu.
(Available in analog Mode Only)
Fine Removes noise such as horizontal stripes. If the noise 
persists even after Fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog Mode Only)
SharpnessChanges the clearance of image.
H-PositionChanges the horizontal position of the monitors...

Menu Description Play/Stop
LanguageChange the language used in the menu. You can choose 
one of the seven languages. 
Note:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer.
H-PositionYou can change the horizontal position where the OSD 
menu appears on your monitor.
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the transparency of the background of the OSD.
Display TimeThe...

Menu Description Play/Stop
Auto SourceSelect 
Auto Source for the monitor to automatically select 
the signal source.
Image ResetImage parameters are replaced with the factory default 
values.
Color ResetColor parameters are replaced with the factory default 
values.
 
 
 
 
 Information   
Menu Description
 

InformationShows a video source, display mode on the OSD screen.