Samsung Syncmaster 913bm Quick Start Guide

 
 
      For working with a mixture of images such as text and 
graphics.
4) Entertain : High Brightness 
  For watching motion pictures such as a DVD or VCD.
>>Click here to see an animation clip 
Volume button[ ]When OSD is not on the screen, push the button to adjust 
volume.
Adjust buttons [ ]Adjust items in the menu.
Enter button [ ] /  
SOURCE button Activates a highlighted menu item. /  
Push the Source and then select the Video signal while the 
OSD is off. (When the Source button is pressed to...

  
 
  
  
  
  
Kensington LockThe Kensington lock is a device used to physically fix the system 
when using it in a public place. (The locking device has to be 
purchased separately. )  
For usin
g a locking device, contact where you purchase it.
 
Headphone connection terminal [ ]
AUDIO INConnect the audio cable for your monitor to the audio port on the 
back of your computer. 
See Connecting the Monitor for further information regarding cable connections.
 

    
 
 
 Connecting the Monitor 
1. Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. 
 
[ RGB IN ]  
2-2. Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
[ DVI IN ]  
2-3. Connected to a...

 
 Using the Stand 
 
   Pivot Stand / Sliding Stand
 
 
A.Stand Stopper
 
 
   Attaching a Base 
    This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
 

A. Monitor  
 
B. Mounting interface pad  
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it 
with four screws that came with the arm-type base, wall mount hanger or other base. 
 
 
 Installing the Monitor Driver (Automatic)...

 
 
4. Click the 
Install button in the 
Warning window. 
 
 
 
5. Monitor driver installation is completed.  
 
 
 
  Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click 
Windows XP/2000 Driver  
3. Choose your monitor model in the model list, then click the 
OK button. 
 
 
 
4. If you can see following message window, then click the 
Continue Anyway button. 
Then click 
OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS...

 
 
 Installing the Monitor Driver (Manual) 
Windows XP | Windows 2000 |Windows Me |Windows NT | Linux  
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :...

 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this...

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings...

 
 
   Microsoft® Windows® NT Operating System 
 
1. Click 
Start, 
Settings, 
Control Panel, and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click 
All Display 
Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) 
and then click 
OK.  
4. Click 
Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of...