Samsung Syncmaster 740bf Quick Start Guide

							 
 
9. Click Finish. 
Have to reboot the system in order for the MagicRotation to work properly. 
 
 
10. When the installation is complete, the MagicRotation executable icon appears on your 
desktop.  
 
 
 
 Installation Problems  
The installation of MagicRotation can be affected by the factors such as video card, 
motherboard and the network environment.  
See Troubleshooting if you have trouble during installation.  
 Limitation 
1. The Display Driver should be properly loaded for the MagicRotation to work properly. 
The installed Display Driver should be the latest driver supplied by the vendor.  
 
2. If some applications like Windows Media Player, Real Player, etc. are not displaying 
 
 
 
						

							movie files properly in 90, 180 and 270 orientations then do the following : {Close the application.  {Select the Orientation (90, 180, 270) you want to view the application.  {Relaunch the application.  
In most cases this should fix the problem.  
 
3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the 
orientation mode selected (90, 180, 270). 
e.g. 3D games  
 
4. DOS based applications in Full Screen Mode will not function as per the orientation mode 
selected (90, 180, 270).  
 
5. Dual is not supported in Windows™ 98, ME, NT 4.0.  
 
6. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).  
7. If you are changing your Graphic Card it is recommended that you uninstall the 
MagicRotation Software before doing so.  
 
 System Requirements 
OS 
zWindows™ 98 SE  zWindows™ Me  zWindows™ NT 4.0  zWindows™ 2000  zWindows™ XP Home Edition  zWindows™ XP Professional  
Hardware 
z128MB Memory above(recommended)  z25MB Free Hard disk space above  
Service Packs 
zIt is recommended that your System has the latest Service Pack installed.  zFor Windows™ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with 
Active Desktop component.  
          
* For more information, visit the MagicRotation website.  
* Windows™ is registered trademark of Microsoft Corporation,Inc. 
 
						

							 
 
Overview | Installation | Interface | Uninstall |Troubleshooting 
 zWhen Rotation is functioning, portion of MagicTune™ program may not 
operate normally.  
zAutoRotation : The screens display will automatically rotate when the 
monitor is rotated. 
  
To execute Auto Rotation, it should be done as below.  
zPlease install both MagicRotation and MagicTune™ 3.6 programs in your 
computer.  
zLaunch MagicTune 3.6  zOption → Preference → Click the small box in the enable task tray 
menu.  
 
zMagicRotation™ program can not be provided as Simple Stand does 
not support Pivot function.  
zThe permitted angle of rotation of the monitor is determined by the 
model of the monitor.  
 
 Interface 
Task Bar Menu Menu pops up when the right mouse 
button is click. 
 Rotate :  Display will get rotated by the unit of 90 degree.
 Rotate to 0 : Display will get rotated to 0 degree from the current angle of 
Rotation. 
 
						

							 Rotate to 90 : Display will be rotated 90 degrees from the current angle. 
 Rotate to 180 : Display will be rotated 180 degrees from the current angle. 
 
						

							 Rotate to 270 : Display will be rotated 270 degrees from the current angle. 
 
 
 Hot key : Hot Keys are available by default and can be changed by user. 
It can be assigned by user directly with keyboard after changing the existing 
HotKey . User can create the hot key with the combination of Shift, Ctrl, Alt and 
general keys. In case only general key is pressed, it will be assigned in the form of 
Alt+general key. 
 Help : Shows the HELP of MagicRotation program. 
 About : Shows the version and copyright of MagicRotation program.
 Exit : Exits from MagicRotation program.
 
						

							Overview | Installation | Interface | Uninstall |Troubleshooting 
 
 Uninstall 
The MagicRotation program can be removed only by using the Add/Remove Programs option 
of the Windows Control Panel.  
Perform the following steps to remove MagicRotation. 
1. Go to [Task Tray]  [Start]  [Settings] and select [Control Panel] in the menu.  
If the program runs on Windows™ XP, go to [Control Panel] in the [Start] menu.  
 
2. Click the Add/Remove Programs icon in Control Panel.  
 
3. In the Add/Remove Programs screen, scroll down to find MagicRotation  
Click on it to highlight it.  
 
4. Click the Change/Remove button to remove the program. 
 
5. Click Yes to begin the uninstall process.  
 
6. Wait until the Uninstall Complete dialog box appears. 
 
7. After uninstall restart the system to complete the uninstallation.  
Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and 
answers) and software upgrades. 
* Windows™ is registered trademark of Microsoft Corporation,Inc. 
 
						

							Overview | Installation | Interface | Uninstall | Troubleshooting 
 
 Troubleshooting 
 Before You Call Technical Support 
 zMagicRotation Software works with the installed Display Driver supplied by your 
Graphic Card Vendor to provide screen rotation capabilities. If the installed Display 
Driver is working incorrectly or has bugs in it, then these bugs would still exist even 
after MagicRotation Software is installed. 
Any incorrect/random behaviour resulting due to problems in the installed Display 
Driver are not due to MagicRotation Software. 
 
In order to verify if a problem exists in the installed Display Driver , you can perform 
the following diagnostic steps : 
 
1. Check if the problem is occurring in both 0 orientation (Landscape mode) and 90 
orientation (Portrait mode). 
2. Check if the problem occurs with different color depths (8/16/32 bits per pixel) 
and different resolution modes (800 x 600, 1024 x 768). 
3. Check if the problem occurs without installing MagicRotation Software.  
 
 
If the problem is repeating in any/all of the following scenarios then it may be the 
problem with your installed Display Driver : 
 
In order to correct the problem you need to perform the following steps : 
 
1. Uninstall MagicRotation Software.  
2. Obtain the latest Display Driver from your Graphic Card Vendor. 
The latest Display Driver from (ATI, NVIDIA, MATROX, INTEL, etc.) are easily 
available for download from their respective websites.  
3. Install the latest Display Driver  
4. Install MagicRotation Software. In most of the cases this should correct the 
problem. 
 
 
zMagicRotation may not work in case monitor is replaced or driver of graphic card is 
updated while MagicRotation is operating. 
If so, please restart the system. 
 
zVisit the MagicRotation website for technical support for MagicRotation, FAQs (questions 
and answers) and software upgrades.  
 
						

							 
 
 
 Check List  
Before calling for servic e, check the information in this section to see if you can remedy any 
problems yourself. If you do  need assistance, please call the phone number on the 
Information section or contact your dealer .
 
 
Symptom Check List Solutions
No images on the 
screen. I cannot turn 
on the monitor. Is the power cord 
connected properly?
Check the power cord connection 
and supply.
Can you see  Check 
Signal Cable  on the 
screen?  (Connected using the D-sub 
cable)
 
Check the signal cable connection. 
(Connected using the DVI cable)  
If you still see an (error) message 
on the screen when the monitor is 
connected properly, check to see if 
the monitor status is set to analog.  
Press Source button to have the 
monitor double-check the input 
signal source.
If the power is on, reboot 
the computer to see the 
initial screen(the login 
screen), which can be 
seen.  If the initial screen (the login screen) 
appears, boot the computer in the 
applicable mode (the safe mode for 
Windows ME/XP/2000) and then 
change the frequency of the video 
card. 
(Refer to the 
Preset Timing Modes ) 
Note: If the initial screen (the login 
screen) does not appear,  contact 
the Service Center or your dealer .  
Can you see  Not 
Optimum 
Mode,Recommended 
mode 1280 x 1024 60Hz  
on the screen?  You can see this message when the 
signal from the vi
deo card exceeds 
the maximum resolution and 
frequency that the monitor can 
handle properly.  
 
Adjust the maximum resolution and 
frequency that the monitor can 
handle properly.  
 
If the display exceeds SXGA or 
75Hz, a  Not Optimum 
 
						

							Mode,Recommended mode 
1280 x 1024 60Hz message is 
displayed. If the display exceeds 
85Hz, the display will work properly 
but the 
Not Optimum 
Mode,Recommended Mode 
1280 x 1024 60Hz message 
appears for one minute and then 
disappears.  
Please change to the recommended 
mode during this one-minute period. 
 
(The message is displayed again if 
the system is rebooted.) 
There is no image on the 
screen.  
Is the power indicator on 
the monitor blinking at 1 
second intervals?The monitor is in PowerSaver mode. 
 
press a key on the keyboard to 
activate the monitor and restore the 
image on the screen.  
 
If there is still no image, press the 

Source button.  
Then press any key on the keyboard 
again to activate the monitor and 
restore the image on the screen.
Connected using the DVI 
cable?You may get a blank screen if you 
boot the system before you connect 
the DVI cable, or disconnect and 
then reconnect the DVI cable while 
the system is running as certain 
types of graphic cards do not send 
out video signals. 
Connect the DVI cable and then 
reboot the system.
I cannot see the On 
Screen Display.Have you locked the On 
Screen Display (OSD) 
Menu to prevent changes?Unlock the OSD by pressing the 
MENU button for at least 5 seconds.
The screen shows 
strange colors or just 
black and white.Is the screen displaying 
only one color as if looking 
at the screen through a 
cellophane paper? Check the signal cable 
connection.Make sure the video 
card is fully inserted in its slot.
Have the screen colors 
become strange after 
running a program or due 
to a crash between 
applications?Reboot the computer.
Has the video card been 
set properly?Set the video card by referring to the 
video card manual. 
The screen suddenly 
has become 
unbalanced.Have you changed the 
video card or the driver?Adjust screen image position and 
size using the OSD.
Have you adjusted the 
resolution or frequency to 
the monitor?Adjust the resolution and frequency 
at the video card.  
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. 
Readjust Position by referring to the OSD.
The screen is out of 
focus or OSD cannot 
be adjusted.Have you adjusted the 
resolution or frequency on 
the monitor?Adjust the resolution and frequency 
of the video card.  
(Refer to the Preset Timing Modes).
LED is blinking but no 
images on the screen.Is the frequency properly 
adjusted when checking 
the Display Timing on the 
menu?Adjust the frequency properly by 
referring to the video card manual 
and the Preset Timing Modes.  
(The maximum frequency per