Samsung Syncmaster 740bf Quick Start Guide

							 
 
   Microsoft® Windows® NT Operating System
 
 
1. Click  Start, 
Settings , 
Control Panel , and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display 
Modes .  
3. Select a mode that you wish to use (Resolutio n, Number of colors and Vertical frequency) 
and then click  OK.  
4. Click  Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at  All Display Modes, select the level of re
solution and vertical 
frequency by referring to the  Preset Timing Modes in the user guide.
 
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make th e X86Config file, which is a type of system setting file. 
 
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You
 can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can en
ter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not af
fect the actual execution 
of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware. 
 
 
 Natural Color 
 
Natural Color 
 
One of the recent problems in using a computer is  that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very  solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Resear ch Institute (ETRI). 
This system is available only fo r Samsung monitors and makes th e color of the images on the 
monitor the same as the printed or scanned images.  
 
						

							For more information, refer to Help (F1) in the software program.  
How to install the Natural Color software 
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 
screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the [Start] button of Windows and then select [Execute].  
Enter D:\color\eng\setup.exe and then press the  key.  
(If the drive where the CD is inserted is not D:\, enter the applicable drive.) 
How to delete the Natural Color software program 
Select 
Setting/Control Panel on the 
Start menu and then double-click 
Add/Delete a 
program. 
Select Natural Color from the list and then click the 
Add/Delete button. 
 
						

							 
 
1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]This button allows you to adjust items in the menu.
3. [ ]Press this button to activate a highlighted menu item.
4. [
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 AUTO 
 
						

							MenuDescription
AUTO When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
 
- If auto adjustment does not work properly, press AUTO button again to 
adjust picture with more accuracy. 
 
- If you change resolution in the control panel, auto function will be 
executed automatically. 
 
 
 OSD Lock & Unlock 
 
 
						

							MenuDescription
OSD Lock & UnlockAfter pushing the MENU button more than 5 seconds, OSD function is 
locked (unlocked). You can also adjust the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 
 
 MagicBright™ 
 
MenuDescription
 MagicBright™Push the MagicBright button to circle through available preconfigured 
modes. 
- Six different modes (Custom/Text/Internet/Game/Sport/Movie) 
 
 
 Brightness 
 
						

							MenuDescription
 BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 
 
 SOURCE 
 
MenuDescription
SOURCESelects the video signal while the OSD is off. 
 
 
  Picture Brightness Contrast
 
						

							  Color MagicColor Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset RTA
  Information
 Picture   
MenuDescriptionPlay/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature : When OSD is not on the screen, 
push the button to adjust brightness. 
Contrast
You can use the on-screen menus to change the contrast 
according to personal preference. 
(Not available in MagicColor mode of Full and Intelligent.)
 
 
 
 
 Color   
 
						

							MenuDescriptionPlay/Stop
MagicColorMagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly without disturbing image 
quality. 
 
1) Off - Returns to the original mode.
2) Demo - The screen before applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full - Displays not only vivid natural color but also 
more realistic natural skin color with clearness.
4) Intelligent - Displays vivid natural color with clearness.
5) MagicZone - The MagicZone ensures the clear and 
sharp display of animated multimedia or photo images by 
enhancing the brightness, sharpness, saturation, hue of a 
certain area on the screen. 
Especially, MagicZone is appropriate to using the moving 
picture.  
MagicZone 
 
  Hue  
: This function is to adjust the hue of the MagicZone.
  Saturation  
: This function is to adjust the saturation of the 
MagicZone.
  Brightness  
: This function is to adjust the brightness of the 
MagicZone.
  Sharpness  
: This function is to adjust the sharpness of the 
MagicZone.
  H-Position  
: This function is to move the MagicZone horizontally.
  V-Position  
: This function is to move the MagicZone vertically.
  H-Size  
: This function is to adjust the horizontal size of the 
MagicZone.
 V-Size  
Hue 
 
Saturation 
 
Brightness 
 
Sharpness 
 
H-Position 
 
V-Position 
 
H-Size 
 
V-Size 
 
						

							 : This function is to adjust the vertical size of the 
MagicZone. 
Color Tone
The tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom. 
(Not available in MagicColor mode of Full and Intelligent.)
Color ControlAdjusts individual R,G,B color balance. 
(Not available in MagicColor mode of Full and Intelligent.)
Gamma
Gamma correction changes the luminance of the colors 
with intermediate luminance. 
zMode 1  zMode 2  zMode 3  
 
 
 
 
 Image   
MenuDescriptionPlay/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only)
Fine 
Removes noise such as horizontal stripes. If the noise 
persists even after fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only)
SharpnessChanges the clearance of image. 
(Not available in MagicColor mode of Full and Intelligent.)
H-Position
Changes the horizontal position of the monitors entire 
display. 
(Available in analog mode only)
Changes the vertical position of the monitors entire 
 
						

							V-Positiondisplay. 
(Available in analog mode only)
 
 
 
 
 OSD   
MenuDescriptionPlay/Stop
  
H-PositionYou can change the horizontal position where the OSD 
menu appears on your monitor.
V-Position You can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the transparency of the background of the OSD.
Display Time The menu will be automatically turned off if no adjustments 
are made for a certain time period.  
You can set the amount of time the menu will wait before it 
is turned off.
 
 
 
 
 Setup   
Language You can choose one of nine languages. 
 
Note
:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer.