Samsung Syncmaster 740bf Quick Start Guide

Install drivers   Install programs  
SyncMaster 740BF / 940BF
 

 
 
  Notational 
  
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Grounding to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for an extended period of time, set your computer to DPMS.  
If using a screen saver, set it to the active screen mode.  
 
 

 
 Do not use a damaged or loose plug. 
zThis may cause an electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause an electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug and wire nor place...

  
  
Be sure to contact an authorized Service Center, when installing your monitor in 
a location with the heavy dust, high or low temperatures, high humidity, chemical 
substance and where it operates for 24 hours such as the airport, the train 
station or etc. 
 
Failure to do so may cause a serious damage to your monitor. 
 
 
Put your monitor in a location with low humidity and a minimum of dust. 
zFailure to do so may cause an electric shock or fire inside the monitor.  
 
 
Do not drop the monitor...

 
 
Set down the monitor carefully. 
zThe monitor could be damaged or broken.  
 
 
Do not place the monitor face down. 
zThe TFT-LCD surface may be damaged.  
 
 
Installing a wall bracket must be done by a qualified professional. 
zInstallation by unqualified personnel may result in injury.  
zAlways use the mounting device specified in the owners manual.  
 
 
When installing the product, make sure to keep it away from the wall 
(more than 10 cm / 4 inch ) for ventilation purposes. 
zPoor ventilation...

 
 
If the connector between the plug and the pin is dusty or dirty, clean it 
properly with a dry cloth. 
zA dirty connector may cause an electric shock or fire.  
 
 
Make sure to unplug the power cord before cleaning the product. 
zOtherwise, this may cause electric shock or fire.  
 
 
Unplug the power cord from the power outlet and wipe the product using 
a soft, dry cloth. 
zDo not use any chemicals such as wax, benzene, alcohol, thinners, 
insecticide, air freshener, lubricant or detergent....

 
 
If the monitor is dropped or the casing is damaged, turn the monitor off 
and unplug the power cord. Then contact the Service Center . 
zThe monitor may malfunction, causing an electric shock or fire.  
 
 
Disconnect the plug from the outlet during storms or lightening or if it is 
not used for a long period of time. 
zFailure to do so may cause an electric shock or fire.  
 
 
Do not try to move the monitor by pulling only the wire or the signal 
cable. 
zThis may cause a breakdown, electric shock...

flows into the product, turn the product off, unplug the power connector 
from the wall outlet and contact Service Center.  
 
If you view a fixed screen for an extended period of time, residual image 
or blurriness may appear. 
zChange the mode to energy save or set a screensaver to moving picture 
when you need to be away from the monitor for an extended period of 
time.  
 
Adjust the resolution and frequency to the levels appropriate for the 
model. 
zInappropriate resolution may cause undesirable...

degraded insulation, leading to electric shock or fire.  
 
Do not place children’s favorite objects (or anything else that may be 
tempting) on the product. 
zChildren may try to climb on the product to retrieve an object. The 
product could fall, causing physical damage or even death.  
 
 
 

 
 
 List of Features 
   RTA Monitor  
 
RTA(Response Time Accelerator)  
A function that accelerates the response speed of the panel so as to provide a sharper and 
more natural video display.
zRTA On   Activates the RTA function so that the panel operates at a higher 
response speed than  its original speed.
zRTA Off  Deactivates the RTA function so that the panel operates at its original 
response speed. 
( Note : If you turn the power off and on again a
fter switching RTA off, the RTA function is...