Samsung Syncmaster 710n Quick Start Guide

							  
 
This monitor driver is under certifying MS logo,and  this installation dont damage your system.The 
certified driver will  be posted on Samsun g Monitor Homepage  
http://www.samsung .com/ 
 
9. Click the  Close button then click  OK button continually. 
 
 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Fo und on your monitor, follow these steps.
1. Choose  OK button on the  Insert disk window.  
2. Click the  Browse button on the  File Needed window.  
3. Choose A:(D: Driver) then click  the Open button and then click 
\ OK button.  
How to install
1. Click  Start , Setting  , Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click  Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on  Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this device so that I can choose a specific 
driver  then click  Next and then click  Have disk.  
7. Click the  Browse button then choos e A:(D: Driver). \  
8. Click the  Open button, then click  OK button.  
9. Choose your monitor model and click the  Next button then click  Next button.  
10. Click the  Finish button then the  Close button.  
Case1: If the Properties button is inactive, it means your monitor is properly configured. Please 
stop installation 
Case2: If the Properties button is active, clic k the Properties button then follow next steps 
continually.
 
						

							If you can see the Digital Signature Not Found  window then click the Yesbutton. And 
click the  Finish button then the  Close button. 
 
 
 
    Microsoft® Windows® NT Operating System
 
 
1. Click  Start, Settings , Control Panel , and then double-click Display icon.  
2. In Display Registration Information wi ndow, click Settings Tab and then click All Display Modes.  
3. Select a mode that you wish to use (Resolution,  Number of colors and Vertical frequency) and then 
click  OK.  
4. Click  Apply button if you see the screen working normally after clicking Test. If the screen is not 
normal, change to a different  mode (lower mode of resolution, colors or frequency).  
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency 
by referring to the  Preset Display Modes  in the user guide.
 
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make the  X86Config file, which is a type of system setting file.  
  1. Press Enter at the first and the second sc reen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You can en ter the frequency directly.)  
8. Set a  vertical frequency  for your monitor. (You can en ter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not affect the actual execution of X-
Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
 
 Natural Color 
 
Natural Color Software Program
 
 
One of the recent problems in usin
g a computer is that the color of the images printed out by a printer 
or other images scanned by a scanner or a digita l camera are not the same as those shown on the 
monitor.  
The Natural Color S/W is the very solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & Telecommunications 
Research Institute (ETRI). 
This system is available only for Samsung monitors  and makes the color of the images on the monitor 
the same as the printe d or scanned images.  
For more information, refer to Help (F1) in the software program.  
 
						

							How to install the Natural Color software 
Insert the CD included with the  Samsung monitor into the CD-ROM Dr ive. Then, the initial screen of 
the program Natural Color will be executed. Click Natural Color on the initial screen to install the 
Natural Color software. 
To install the program manually, insert the CD in cluded with the Samsung monitor into the CD-ROM 
Drive, click the [Start] button of Wi ndows and then select [Execute].  
Enter D: color eng setup.exe and th en press the  key. 
\\\  
(If the drive where the CD is inserted is not D: , enter the applicable drive.) \ 
How to delete the Natural Color software program  
Select [Setting]/[Con trol Panel] on the [Start] menu and then double-c lick [Add/Delete a program]. 
Select Natural Color from the list an d then click the [Add/Delete] button. 
 
						

							 
 
1. Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment 
menu. 
2. These buttons allow you to adjust items in the menu.
3. These buttons allow you to adjust items in the menu.
4.  Activate a highlighted menu item.
5.  Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted 
automatically.
 
 
 AUTO 
 
SyncMaster 510T / 710T / 910T
 MagicBright™  
MenuDescription
MagicBright™Then push the MagicBright button again to
 circle through available preconfigured 
modes. 
- four different mode (Custo m/Text/Internet/Entertain) 
 
 
Menu Description
AUTO  When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog Mode Only) 
 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
zIf Auto Adjustment does not work properly, press Auto button again to 
adjust picture with more accuracy.  
zIf you change resolution in the control panel, Auto function will be 
executed automatically. 
 
 
 
						

							MenuDescription
BrightnessAdjust Brightness. 
 
 
 Source  
MenuDescription
SourceSelects the Video signal while the OSD is off. 
 
 Picture 
 Brightness 
MenuDescriptionPlay/Stop
BrightnessAdjust the Brightness.  
Direct Access Feature 
: When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
MenuDescriptionPlay/Stop
Color Tone The tone of the color can be 
changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust individual R,G,B color balance.
Gamma Select one of three pre-defined gammas.
 
 
 Image 
MenuDescriptionPlay/Stop
CoarseRemoves noise such as vertical stripes. Coarse adjustment may 
move the screen image area. You may relocate it to the center 
using the Horizontal Control menu. 
(Available in analog Mode Only)
Fine
 
Removes noise such as horizontal stripes. If the noise persists 
even after Fine tuning, repeat it after adjusting the frequency 
(clock speed). 
(Available in analog Mode Only)
Sharpness Follow these instuction to change the clearance of image.
H-PositionFollow these instructions to chan ge the horizontal position of 
the monitors entire display. 
(Available in analog Mode Only)
V-Position Follow these instructions to chan
ge the vertical position of the 
monitors entire display. 
(Available in analog Mode Only)
 
 
 
1. PictureBrightnessContrast
2. ColorColor ToneColor ControlGamma
3. ImageCoarseFineSharpnessH-PositionV-Position
4. OSDLanguageH-PositionV-PositionTransparencyDisplay Time
5. SetupAuto SourceImage ResetColor Reset
6. Information
 
 
						

							 OSD 
MenuDescriptionPlay/Stop
LanguageFollow these steps to change the language used in the menu. 
You can choose one of seven languages. (English, German, 
Spanish, French, Italian, Swedish, Russian) 
Note
:The language chosen affects only the language of the 
OSD. It has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.
V-Positon You can change the vertical 
position where the OSD menu 
appears on your monitor.
TransparencyChange the translucency of the background of the OSD.
Display Time The menu will automatically turn off if no adjustments are made 
for a certain time period.  
You can set the amount of time the menu will wait before it 
turns off.
 
 
 Setup 
MenuDescriptionPlay/Stop
Auto Source
Select 
Auto Source  for the monitor to au tomatically select the 
signal source.
Image ResetImage parameters are replaced wi th the factory default values.
Color ResetColor parameters are replaced wi th the factory default values.
 
 
 Information 
MenuDescription
InformationShows a video source, displa y mode on the OSD screen. 
 
						

							 
 
1. Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment 
menu. 
2. These buttons allow you to adjust items in the menu.
3. These buttons allow you to adjust items in the menu.
4.  Activate a highlighted menu item.
5.  Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted 
automatically.
 
 
 AUTO 
 
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N
 MagicBright™  
MenuDescription
MagicBright™Then push the MagicBright button again to
 circle through available preconfigured 
modes. 
- four different mode (Custo m/Text/Internet/Entertain) 
 
 
Menu Description
AUTO  When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
zIf Auto Adjustment does not work properly, press Auto button again to 
adjust picture with more accuracy.  
zIf you change resolution in the control panel, Auto function will be 
executed automatically. 
 
 
						

							MenuDescription
BrightnessAdjust Brightness. 
 
 
 
 Picture 
MenuDescriptionPlay/Stop
BrightnessAdjust the Brightness.  
Direct Access Feature 
: When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
 Brightness 
MenuDescriptionPlay/Stop
Color Tone The tone of the color can be 
changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust individual R,G,B color balance.
Gamma Select one of three pre-defined gammas.
 
 
 Image 
MenuDescriptionPlay/Stop
CoarseRemoves noise such as vertical stripes. Coarse adjustment may 
move the screen image area. You may relocate it to the center 
using the Horizontal Control menu.
Fine
 Removes noise such as horizontal stripes. If the noise persists 
even after Fine tuning, repeat it after adjusting the frequency 
(clock speed).
Sharpness Follow these instuction to change the clearance of image.
H-PositionFollow these instructions to chan ge the horizontal position of 
the monitors entire display.
V-Position Follow these instructions to chan
ge the vertical position of the 
monitors entire display.
 
 
 
1. PictureBrightnessContrast
2. ColorColor ToneColor ControlGamma
3. ImageCoarseFineSharpnessH-PositionV-Position
4. OSDLanguageH-PositionV-PositionTransparencyDisplay Time
5. SetupImage ResetColor Reset
6. Information
 
						

							 OSD 
MenuDescriptionPlay/Stop
LanguageFollow these steps to change the language used in the menu. 
You can choose one of seven languages. (English, German, 
Spanish, French, Italian, Swedish, Russian) 
Note
:The language chosen affects only the language of the 
OSD. It has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.
V-Positon You can change the vertical 
position where the OSD menu 
appears on your monitor.
TransparencyChange the translucency of the background of the OSD.
Display Time The menu will automatically turn off if no adjustments are made 
for a certain time period.  
You can set the amount of time the menu will wait before it 
turns off.
 
 
 Setup 
MenuDescriptionPlay/Stop
Image ResetImage parameters are replaced wi
th the factory default values.
Color ResetColor parameters are replaced wi th the factory default values.
 
 
 Information 
MenuDescription
InformationShows a video source, displa y mode on the OSD screen. 
 
						

							       Overview      |     Install      |     OSD Mode     |     Color 
Calibration     
|     Uninstall      |     Troubleshooting        
 
 Overview 
 
 
 
 What is MagicTune™? 
Monitor performance can vary due to the graphics ca rd, host computer lighting conditions and other 
environmental factors.  In order to get the best image on  a monitor requires you to adjust it for your unique 
setting.  Unfortunately, the manual controls available to  tune the image often prove to be challenging.  Proper 
adjustment (tuning) requires an easy  to use program that goes through a  step-by-step process to obtain the 
best overall picture quality.  
In most cases even simple adjustments to Brightness, or  Contrast require navigation of the multi-level, on-
screen display (OSD) menus that are not easy to understan d.  Furthermore, there is no feedback to assist in 
correctly setting the controls of the monitor.  MagicTune  is a software utility that guides you through the tuning 
process with easy to understand instructions and back gr ound patterns designed for each monitor control. The 
display settings for each user can be  saved, providing an easy way to select display characteristics in a multi-
user environment, or having a single user have multiple  defined presets based on content and ambient lighting.  
 
 
 Basic Functionality 
MagicTune is a software utility that allows monitor adjustment and color tuning using the Display Data 
Channel Command Interface (DDC/CI) protocol.   All adjustments to th e display are controlled via software 
to eliminate the need to use the mo nitor on-screen display (OSD).   
MagicTune supports Windows  98SE, Me, 2000, NT, XP Home, and XP Professional. 
  MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor 
configurations that are best suited for you.  
 
 
 OSD Mode 
The OSD mode allows easy adjustment  of monitor settings without taking pre-defined steps. You can access the 
desired menu item to set with ease.