Samsung Syncmaster 320tsn User Manual

							 
 
 
Info Grid shows some basic information necessary to Image Size Control.
1)
 ( Power Status) 
- Shows the power status of the current display.
2) Image Size  
- Shows the current Image Size of the display in use.
3) Input  
- Shows the current Input Source of the display in use.
4) Info Grid displays only the displays whose Input Source is PC, BNC, DVI. 
5) PC Source - When you click Image Size, the PC Source tab first appear.  
- The Image Size Control button controls Image Size available for PC, BNC, DVI.
6) Video Source  
- Click the Video Source tab to control Image Size for respective Input Source.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Image Size Control is available only for the displays for which power status is ON.
 Image Size  
 
TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV
1. Click Image Size of the main icons and the Image Size control screen appears.
 
						

							 
 
 
Info Grid shows some basic information necessary to Image Size Control.
1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV.  
Click Select All or use Check Box to select a display to control.
2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source. 
3) Switch Image Size of the selected display randomly.
Note: Auto Wide, Zoom1 and Zoom2 are not available for selection when the input signal type for 
Component and DVI (HDCP) is 720p or 1080i.  
( The Auto Wide mode is available only for TV, AV, and S-Video. ) 
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
The Image Size Control feature is available only for the displays whose power status is ON.
 
 Time  
 
1. Click Time of the main icons and the Time Control screen appears.
 
						

							 
 
 
Info Grid shows some basic information necessary to Time Control.
1) Current Time 
- Set the current time for the selected display (PC Time).
- To change the current time, first change the PC Time.
2) On Time Setup 
- Set the Hour, Minute, AM/PM of On Time Setup, Status, Source, Volume of the selected display.
3) Off Time Setup 
- Set the Hour, Minute, and AM/PM, Status for Off Time Setup of the selected display.
4) Shows the On Time settings.
5) Shows the Off Time settings.
The Input source of MagicInfo works only on MagicInfo model.  
The Input source of TV works only on TV model.  
Time Control is available only for the displays for which the power status is ON. 
At On Time Setup, TV Source functions only for TV Model. 
At On Time Setup, MagicInfo Source functions only for MagicInfo Model.  
  
 PIP  
 
PIP Size
1. Click PIP of the main icons and the PIP control screen appears.  
Click Select All or use Check Box to select a display to control. 
 
						

							 
 
 
Info Grid shows some basic information necessary to PIP Size Control.
1) PIP Size 
- Shows the current PIP Size of the display in use.
2) OFF 
- Turns off the PIP of the selected display.
3) Large 
- Turns on the PIP of the selected display and changes the size to Large.
4) Small 
- Turns on the PIP of the selected display and changes the size to Small.
5) Double 1 
- Turns on the PIP of the selected display and changes the size to Double 1.
6) Double 2  
- Turns on the PIP of the selected display and changes the size to Double 2. 
7) Double 3 (Picture By Picture) 
- Turns on the PBP of the selected display and changes the size to Double 3. 
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
PIP Size can be controlled with turning on the LCD Display power.
 PIP  
 
PIP Source
1. Click PIP of the main icons and the PIP control screen appears.
 
						

							 
 
 
Info Grid shows some basic information necessary to PIP Source Control.
1)  PIP Source  
- PIP Source can be controlled with turning on the LCD Display power. 
2) PC  
- Changes the source of the PIP of the selected display to PC. 
3) BNC  
- Changes the source of the PIP of the selected display to BNC. 
4) DVI  
- Changes the source of the PIP of the selected display to DVI. 
5) AV  
- Changes the source of the PIP of the selected display to AV. 
6) S-Video  
- Changes the source of the PIP of the selected display to S-Video. 
7) Component  
- Changes the source of the PIP of the selected display to Component. 
8) HDMI 
- Changes the source of the PIP of the selected display to HDMI. 
Note: Some of the PIP Sources may not be available for selection, depending on the input source type 
of the Main Screen.
The Input source of MagicInfo works only on MagicInfo model. 
The PIP Control feature is available only for the displays whose power status is ON and the PIP 
function is set to ON.
 Settings  
 
Picture
1. Click Settings of the main icons and the Settings Control screen appears.
 
						

							 
 
 
Info Grid shows some basic information necessary to Settings Control.  
When each function is selected, the set value of the selected function is displayed in the slide.When selected, each 
function fetches the value for the set and displays it on the slide bar. When Select All is chosen, the default value 
is displayed. Changing a value in this screen will automatically change the mode to CUSTOM. 
1) Picture 
- Available only for TV, AV, S-Video, Component, HDMI, DTV.
2) Contrast 
- Adjusts Contrast of the selected display. 
3) Brightness 
- Adjusts Brightness of the selected display.
4) Sharpness 
- Adjusts Sharpness of the selected display. 
5) Color 
- Adjusts Color of the selected display. 
6) Tint  
- Adjusts Tint of the selected display.
- Available  only for NT. 
7) Color Tone 
- Adjusts the Color Tone for the selected display. 
8) Color Temp  
- Adjusts the Color Temp for the selected display. 
9) Brightness Sensor  
- Adjusts the Brightness Sensor for the selected display. 
10) Dynamic Contrast 
- Adjusts the Dynamic Contrast for the selected display. 
The Input source of MagicInfo works only on MagicInfo model. 
Color Temp is only enabled if the Color Tone is set to Off.
The Input source of TV works only on TV model. 
This feature is available only for the displays whose power status is ON and if no selection is made, the 
factory default is displayed.
 Settings  
 
Picture PC 
 
						

							 
 
 1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM. 
1) Picture PC 
- Available only for PC, BNC, DVI.
2) Contrast 
- Adjusts Contrast of the selected display. 
3) Brightness 
- Adjusts Brightness for the selected display. 
4) Red 
- Adjusts red Color of the selected display. 
- Available  only for NT. 
5) Green  
- Adjusts green Color of the selected display. 
- Available  only for NT. 
6) Blue  
- Adjusts blue Color of the selected display. 
- Available  only for NT. 
7) Color Tone  
- Adjusts the Color Tone for the selected display. 
8) Color Temp  
- Adjusts the Color Temp for the selected display. 
9) Brightness Sensor  
- Adjusts the Brightness Sensor for the selected display. 
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Color Temp is only enabled if the Color Tone is set to Off.
This feature is available only for the displays whose power status is ON and if no selection is made, the 
factory default is displayed.
 Settings  
 
 
						

							 
 
 
Audio 
1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM.
1) Audio 
- Controls audio settings for all input sources.
2) Bass 
- Adjusts Bass of the selected display. 
3) Treble 
- Adjusts Treble of the selected display. 
4) Balance 
- Adjusts Balance of the selected display. 
5) SRS TS XT 
- SRS TS XT Sound ON/OFF of the selected display.
6) Sound Select 
- Select either Main or Sub when PIP is On.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
This feature is available only for the displays whose power status is ON and if no selection is made, the 
factory default is displayed.
 Settings  
 
Image Lock 
1. Click Settings of the main icons and the Settings Control screen appears.
 
						

							 
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock  
- Available only for PC, BNC.
2) Coarse 
- Adjusts Coarse of the selected display.
3) Fine 
- Adjusts Fine of the selected display.
4) Position 
- Adjusts Position of the selected display.
5) Auto Adjustment 
- Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for which the power status is ON.
 Maintenance  
 
Lamp Control 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen.
 
						

							 
 
An Info Grid showing several basic data items appears. 
1) Maintenance 
- Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control 
- Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control 
- Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 
The Maintenance Control feature is available only for the displays whose power status is ON.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
 Maintenance  
 
Scroll 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen.