Samsung Syncmaster 320tsn User Manual

							Downloaded from ManualMonitor.com Manual± 
						

							Downloaded from ManualMonitor.com Manual± 
						

							Downloaded from ManualMonitor.com Manual± 
						

							Downloaded from ManualMonitor.com Manual± 
						

							 
 
 
 
Introduction  
 
 
 A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously 
operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and 
a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a 
display.
Main Screen 
 
  Click Start > Program > Samsung > MDC System to start the program. 
  Select a set to see the volume of the selected set within the slider. 
 
						

							 
  
Main IconsSelect Button
RemoconInfo Grid
Safety LockDisplay Selection
Port SelectionControl Tools 
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receiving function of the display unit. 
3. Set the Safety Lock function. 
When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
4. The setting for the PC Serial Port can change. The original value is COM1. 
5. Click Select all or Clear to select or clear all displays.
6. Use Grid to view brief information on selected display.
7. Select a display from Display Selection. 
8. Use Control Tools to control displays.
 
The remote control Enable/Disable function operates whether or not the power is On/Off, and this 
applies to all displays connected to the MDC. However, regardless of the status at the time the MDC is 
shut down, the remote control signal receiving function of all displays is initialized to Enable when the 
MDC is closed.
Port Selection  
 
 
						

							 
 
1. The Multiple Display Control is originally set to COM1.
2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.
3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will 
be unavailable. 
4. The selected port is stored in the program and used for the next program as well.  
 Power Control 
 
1. Click Power Control of the main icons and the Power Control screen appears.
 
						

							 
Info Grid shows some basic information necessary to Power Control.
 
1)   (Power Status)
 2) Input 
  3) Image Size
  4) On Timer
  5) Off Timer
2. Use the Select All button or Check Box to choose a display to control.
 Power Control allows controlling some of the functions of the selected display. 
1)
Power On/Off 
 
						

							 
 
 - Turns the power of the selected display On/Off. 
2) Volume  
- Controls the volume level of the selected display.  
It receives the volume value of the selected display from the sets and displays it in the slider. 
(When you cancel the selection or choose Select All, the value returns to the default value 10) 
3)
 (Mute On/Off)  
- Turns on/off the Mute function of the selected display. 
When selecting one set at a time, turn on the Mute function for the selected set. 
The Mute function is disabled automatically when you adjust the volume level.  
(The values return to the default settings when you undo the selections or choose Select All.) 
The Power Control feature is available for all displays. 
The Volume Control and Mute features are available only for the displays whose power status is ON. 
 Input Source  
 
1. Click Input Source of the main icons and the Input Source control screen appears.  
Click Select All or use Check Box to select a display to control.
• TV Mode 
• PC Mode 
 
						

							 
 
 
Info Grid shows some basic information necessary to Input Source Control.
1) PC 
- Changes the Input Source of the selected display to PC.
2) BNC 
- Changes the Input Source of the selected display to BNC.
3) DVI 
- Changes the Input Source of the selected display to DVI.
4) TV 
- Changes the Input Source of the selected display to TV. 
5) DTV 
- Changes the Input Source of the selected display to DTV. 
6) AV 
- Changes the Input Source of the selected display to AV. 
7) S-Video 
- Changes the Input Source of the selected display to S-
Video. 
8) Component 
- Changes the Input Source of the selected display to Component. 
9) MagicInfo 
- The Input source of MagicInfo works only on MagicInfo model. 
10) HDMI 
- Changes the Input Source of the selected display to HDMI. 
11) Channel 
- Channel arrow appears when the Input Source is TV.
TV Source can be selected only in products with TV and controlling channels is allowed only when 
Input Source is TV.  
The Input Source Control feature is available only for the displays whose power status is ON.
 Image Size 
 
PC, BNC, DVI
1. Click Image Size of the main icons and the Image Size control screen appears.