Samsung Syncmaster 2494lw User Manual

1. Insert CD into the CD-ROM drive.
2.
Click "Start"  →
 "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I...

7. Click 
the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
the model list and click the "Next" button. 8. If 
you can see following message window, then click the "Continue Anyway" button. Then
click "OK" button.  
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the "Close"...

 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2.
Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel"....

4. Select the "Monitor" tab.
5.
Click the "Change" button in the "Monitor Type" area.
6.
Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you con- nected to your computer and click...

10. You 
have  finished  setting  up  your  monitor.  Execute  X-Window  after  setting  other  re-
quested hardware.
Natural Color
Natural Color Software Program One 
of the recent problems in using a computer is that the color of the images printed out by
a printer or other images scanned by a scanner or a digital camera are not the same as those
shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color
administration  system  developed  by  Samsung  Electronics...

Installation Problems
The installation 
of MultiScreen can be affected by such factors as the video card, motherboard
and the network environment.
System Requirements
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™It is recommended using MultiScreen in Windows ®
 2000 or later. Hardware
•
32 MB Memory above
•

60 MB Hard disk space above
Uninstall The  Multiscreen  program  can  be  removed  only  by  using  the  "Add  or  Remove  Programs"
option of the...

Adjusting the Monitor
Direct Functions
AUTO
(Available in Analog mode only, so “AUTO” icon of OSD is gray in Digital mode.)
When the 
'AUTO'  button  is  pressed,  the  auto  adjustment  screen  appears  as  shown  in  the
animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values
of Fine, Coarse and Position are adjusted automatically.  
If  auto  adjustment  does  not  work  properly,  press  'AUTO'  button  again  to...

To view the operating screen displayed when pressing the [   ] button after configuring the
customized key for a function, click the name of each function.
(MagicBright - MagicColor - Color Effect - Image Size)  Note
You  can 
configure the custom-
ized key for a required function
via Setup > Customized Key.
 
Brightness
When OSD is not on the screen, push the Brightness ( ) button to adjust brightness.
 
 
SOURCE Selects the video signal while the OSD is off.  Note
Not  applicable 

to  ana-
logue...

INFOR-
MATION
   
      PictureMenuDescription
Brightness (Not available in 
MagicBright  mode of Dynamic Contrast.)
You  can 

use the on-screen menus to change the brightness ac-
cording to personal preference.
The larger the number, the brighter the screen. The smaller the
number, the darker the screen. Contrast (Not available in 
MagicBright mode of Dynamic Contrast.)
You  can 

use  the  on-screen  menus  to  change  the  contrast  ac-
cording to personal preference.
The larger the number, the...

MenuDescriptionIf this is the case, adjust the brightness and contrast by using
the OSD menu.
• Text
For documents or works involving heavy text.
• Internet
For 
working 

with  a  mixture  of  images  such  as  texts  and
graphics.
• Game
For watching motion pictures such as a game.
• Sport
For watching motion pictures such as a sport.
• Movie
For watching motion pictures such as a DVD or Video CD.
• Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the
visual signal and...