Samsung Syncmaster 2494lw User Manual

Front
 Note
Touch them lightly with your fingers to use them.MENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Customized Key[ ]
You  can  customize  key 
assignment  for  the  Custom  button  according  to
your preferences.  Note
You can configure  the 

customized key for a required function via  Setup >
Customized Key.
Brightness button []
When OSD is not on the screen, push the button to adjust brightness.
Adjust buttons...

 Note
If  you 
select the digital mode, you must connect your monitor to the graphic
card's DVI port using the DVI cable.
AUTO button
Use this button for auto adjustment.
Power button [  ]
Use this button for turning the product on and off.
Power Indicator
This  light  is  lit  when  operating  normally,  and  blinks  once  when  your  ad-
justments are saved.  Note
See PowerSaver  described 

in the manual for further information regarding
power saving functions. For energy conservation, turn your...

DVI IN(HDCP) / RGB IN
DVI IN(HDCP)
Connect  the  DVI  cable  to  the DVI  IN
(HDCP)
 port on the back of your product.
RGB IN
Connect the RGB IN terminal at the back of
your product to your computer.  Kensington Lock
Kensington Lock
The  Kensington  Lock  is  a  device  used  to
physically  fix  the  system  when  using  it  in  a
public  place.  The  locking  device  has  to  be
purchased separately. The appearance and
locking  method  may  differ  from  the  illustra-
tion depending on the...

Connections
Connecting Cables
Connect the power cord for your monitor to the POWER port on the back
of the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
   Using the D-sub (Analog) connector on the video card.
• Connect  the 

signal cable to the 15-pin, D-sub port on the back of your
monitor. [RGB IN]
   Using the DVI (Digital) connector on the video card.
• Connect the 
 DVI Cable to the 
DVI IN(HDCP) Port on the back of your
Monitor....

Using the Stand
Monitor Assembly
Attaching a Base
This monitor accepts a 200 mm x 100 mm VESA-compliant mounting interface pad. Simple Stand
 Monitor
 Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay  the LCD 
monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove four screws and then remove the stand from the LCD monitor. Connections
Downloaded from ManualMonitor.com Manual± 

4. Align 
the mounting interface pad with the holes in the rear cover mounting pad and secure
it with four screws that came with the arm-type base, wall mount hanger or other base. • Do 
not use screws longer than the standard dimension, as they may dam-
age the inside of the Monitor.
•
For wall mounts that do not comply with VESA standard screw specifica-
tions, the length of the screws may differ depending on their specifications.
• Do  not  use  screws  that  do  not  comply  with  the  VESA  standard...

Using the Software
Monitor Driver
 Note
When  prompted 
by the operating system for the monitor driver, insert the CD-
ROM included with this monitor. Driver installation is slightly different from one
operating  system  to  another.  Follow  the  directions  appropriate  for  the  oper-
ating system you have.
Prepare a blank disk and download the driver program file at the Internet web
site shown here.
Internet web site :
http://www.samsung.com/ Installing the Monitor Driver (Automatic)
1.Insert CD into...

 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
Installing the Monitor Driver (Manual) Microsoft®
 Windows Vista™‚ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2. Click  (Start) 
and "Control Panel". Then, double-click on "Appearance and Personal-
ization". 3. Click "Personalization" and then "Display...

If  the  message  "Windows  needs..."  is  displayed,  as  shown  in  the  figure  below,  click
"Continue".
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click "Update Driver..." in the "Driver" tab. 7. Check 
the 
 "Browse  my  computer  for  driver  software"  checkbox  and  click  "Let  me  pick
from a list of device drivers...

9. Select 
the model that matches your monitor from the list of monitor models on the screen,
and click "Next".  
10. Click "Close"  →  "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft
®
 Windows ®
 XP Operating System Using the Software
Downloaded from ManualMonitor.com Manual±