Samsung Syncmaster 2494lw User Manual

							1. Insert CD into the CD-ROM drive.
2.
Click "Start"  →
 "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I will..." then click "Next" and then click "Have disk". Using the Software
Downloaded from ManualMonitor.com Manual± 
						

							7. Click 
the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
the model list and click the "Next" button. 8. If 
you can see following message window, then click the "Continue Anyway" button. Then
click "OK" button.  
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the "Close" button then click "OK" button continually. Using the Software
Downloaded from ManualMonitor.com Manual± 
						

							 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2.
Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button.
4. Choose "Monitor". Case1 : If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2 : If the "Properties" button is active, click the "Properties" button then follow next
steps continually.
5. Click "Driver" and then click on "Update Driver..." then click on the "Next" button.
6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk".
7. Click the "Browse" button then choose A:(D:\Driver).
8. Click the "Open" button, then click "OK" button.
9. Choose your monitor model and click the "Next" button then click "Next" button.
10. Click the "Finish" button then the "Close" button. If you can see the "Digital Signature Not Found" window then click the "Yes" button. And
click the "Finish" button then the "Close" button.
Microsoft ®
 Windows ®
 Millennium Operating System
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button. Using the Software
Downloaded from ManualMonitor.com Manual± 
						

							4. Select the "Monitor" tab.
5.
Click the "Change" button in the "Monitor Type" area.
6.
Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you con- nected to your computer and click "OK".
11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box.
Microsoft ®
 Windows ®
 NT Operating System
1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.
2. In Display Registration Information window, click Settings Tab and then click "All Display Modes".
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click "OK".
4. Click  "Apply"  button  if  you  see  the  screen  working  normally  after  clicking  "Test".  If  the screen  is  not  normal,  change  to  a  different  mode  (lower  mode  of  resolution,  colors  or
frequency).  Note
If  there 

is no Mode at All Display Modes, select the level of resolution and vertical frequency
by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting
file.
1. Press "Enter" at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard.
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7. First  of  all,  set  a  horizontal  frequency  for  your  monitor.  (You  can  enter  the  frequency directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window. Using the Software
Downloaded from ManualMonitor.com Manual± 
						

							10. You 
have  finished  setting  up  your  monitor.  Execute  X-Window  after  setting  other  re-
quested hardware.
Natural Color
Natural Color Software Program One 
of the recent problems in using a computer is that the color of the images printed out by
a printer or other images scanned by a scanner or a digital camera are not the same as those
shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color
administration  system  developed  by  Samsung  Electronics  in  association  with  Korea  Elec-
tronics  &  Telecommunications  Research  Institute  (ETRI).  This  system  is  available  only  for
Samsung monitors and makes the color of the images on the monitor the same as the printed
or scanned images. For more information, refer to Help (F1) in the software program.
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/
pop_download.html
MultiScreen Installation
1.Insert the installation CD into the CD-ROM drive.
2.

Click the MultiScreen installation file.  Note
If  the 

popup window to install the software for the main screen is not displayed, proceed
with the installation using the MultiScreen executable file on the CD.
3. When the Installation Shield Wizard window appears, click "Next".
4. Select "I agree to the terms of the license agreement" to accept the terms of use.
5. Choose a folder to install the MultiScreen‚ program.
6. Click "Install".
7. The "Installation Status" window appears.
8. Click "Finish".
9. When  the  installation  is  complete,  the  Multiscreen  executable  icon  appears  on  your desktop. Double-click the icon to start the program.
Multiscreen execution icon may not appear depending on specification of computer
system or monitor. If that happens, press F5 Key. Using the Software
Downloaded from ManualMonitor.com Manual± 
						

							Installation Problems
The installation 
of MultiScreen can be affected by such factors as the video card, motherboard
and the network environment.
System Requirements
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™It is recommended using MultiScreen in Windows ®
 2000 or later. Hardware
•
32 MB Memory above
•

60 MB Hard disk space above
Uninstall The  Multiscreen  program  can  be  removed  only  by  using  the  "Add  or  Remove  Programs"
option of the Windows ®
 Control Panel.
Perform the following steps remove Multiscreen.
Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a pro-
gram".
Select Multiscreen from the list and then click the "Add/Delete" button. Using the Software
Downloaded from ManualMonitor.com Manual± 
						

							Adjusting the Monitor
Direct Functions
AUTO
(Available in Analog mode only, so “AUTO” icon of OSD is gray in Digital mode.)
When the 
'AUTO'  button  is  pressed,  the  auto  adjustment  screen  appears  as  shown  in  the
animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values
of Fine, Coarse and Position are adjusted automatically.  
If  auto  adjustment  does  not  work  properly,  press  'AUTO'  button  again  to  adjust  picture
with more accuracy. If you change resolution in the control panel, auto function will be executed automatically.
OSD Lock & Unlock When pressing the AUTO button after locking the OSD  
When pressing the MENU button after locking the OSD
This  is 

the function that locks the OSD in order to keep the current states of settings or prevent
others from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to activate the OSD ad-
justment lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD
adjustment lock function.  Note
Though  the 

OSD  adjustment
lock  function  is  activated,  you
can  still  adjust  the  brightness
and  contrast,  and  adjust  Cus-
tomized  Key  ( )  using  the
Direct button.
 
Customized key You can customize key assignment for the Custom button according to your preferences.
Downloaded from ManualMonitor.com Manual± 
						

							To view the operating screen displayed when pressing the [   ] button after configuring the
customized key for a function, click the name of each function.
(MagicBright - MagicColor - Color Effect - Image Size)  Note
You  can 
configure the custom-
ized key for a required function
via Setup > Customized Key.
 
Brightness
When OSD is not on the screen, push the Brightness ( ) button to adjust brightness.
 
 
SOURCE Selects the video signal while the OSD is off.  Note
Not  applicable 

to  ana-
logue  (D-SUB)-or-digital
(DVI)-dedicated models.
OSD Function
Top Menus Sub Menus PICTURE
Bright-
nessContrast
SharpnessMagicBright Coarse
Fine   COLOR
Magic-
ColorRed
GreenBlue Color Tone
Color  Ef-
fect Gamma SIZE  &
POSI-
TION
H-Posi-
tion
V-Position
Image SizeMenu H-Po-
sition Menu  V-Po-
sition SET-
UP&RE-
SET
Reset
Menu  Trans-
parency Language
Off  Timer
On/Off Off  Timer
Setting
Auto
Source PC/AV Mode
Display
TimeCustomized
Key
Adjusting the Monitor
Downloaded from ManualMonitor.com Manual± 
						

							INFOR-
MATION
   
      PictureMenuDescription
Brightness (Not available in 
MagicBright  mode of Dynamic Contrast.)
You  can 

use the on-screen menus to change the brightness ac-
cording to personal preference.
The larger the number, the brighter the screen. The smaller the
number, the darker the screen. Contrast (Not available in 
MagicBright mode of Dynamic Contrast.)
You  can 

use  the  on-screen  menus  to  change  the  contrast  ac-
cording to personal preference.
The larger the number, the brighter the screen. The smaller the
number, the darker the screen.
( Not available in  MagicColor mode of Full and Intelligent. ) Sharpness Changes the clearance of image.
The 
larger 

the number, the clearer the screen. The smaller the
number, the less clear the screen.
( Not available in  MagicColor mode of Full and Intelligent. ) MagicBright
Push  the    button  to  circle  through  available  preconfigured
modes.
MagicBright  is 

a  new  feature  providing  optimum  viewing  envi-
ronment depending on the contents of the image you are watch-
ing.  Currently  seven  different  modes  are  available:  Custom,
Text,  Internet,  Game, Sport, Movie and  Dynamic Contrast . Each
mode has its own pre-configured brightness value. You can easi-
ly  select  one  of  seven  settings  by  simply  pressing  Customized
Key control button.
• Custom
Although  the  values  are  carefully  chosen  by  our  engineers,
the  pre-configured  values  may  not  be  comfortable  to  your
eyes depending on your taste. Adjusting the Monitor
Downloaded from ManualMonitor.com Manual± 
						

							MenuDescriptionIf this is the case, adjust the brightness and contrast by using
the OSD menu.
• Text
For documents or works involving heavy text.
• Internet
For 
working 

with  a  mixture  of  images  such  as  texts  and
graphics.
• Game
For watching motion pictures such as a game.
• Sport
For watching motion pictures such as a sport.
• Movie
For watching motion pictures such as a DVD or Video CD.
• Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the
visual signal and adjusts to create an optimum contrast. Coarse Removes noise such as vertical stripes.
The 
larger 

the number, the more the screen increases vertically.
The  smaller  the  number,  the  more  the  screen  decreases  verti-
cally.
Coarse adjustment may move the screen image area. You may
relocate it to the center using the horizontal control menu.
(Available in  Analog mode only) Fine Removes noise such as horizontal stripes.
If 
the 

noise persists even after  Fine tuning, repeat it after adjust-
ing the frequency (clock speed).
(Available in  Analog mode only) Adjusting the Monitor
Downloaded from ManualMonitor.com Manual±