Samsung Syncmaster 2233sw User Manual
Here you can view all the pages of manual Samsung Syncmaster 2233sw User Manual. The Samsung manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Display Time
The menu will be automatically turned off if no adjustments are made for\
a certain time period.
You can set the amount of time the menu will wait before it is turned of\
f.
• 5 sec •10 sec •20 sec •200 sec
MENU → , → → , → → , → MENU
Setup
Reset Reverts the product settings to factory defaults.
• No •Yes
MENU → , → → → , → MENU
Adjusting the Monitor
40](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-40.png "Page 41
Display Time
The menu will be automatically turned off if no adjustments are made for\
a certain time period.
You can set the amount of time the menu will wait before it is turned of\
f.
• 5 sec •10 sec •20 sec •200 sec
MENU → , → → , → → , → MENU
Setup
Reset Reverts the product settings to factory defaults.
• No •Yes
MENU → , → → → , → MENU
Adjusting the Monitor
40")
Display Time The menu will be automatically turned off if no adjustments are made for\ a certain time period. You can set the amount of time the menu will wait before it is turned of\ f. • 5 sec •10 sec •20 sec •200 sec MENU → , → → , → → , → MENU Setup Reset Reverts the product settings to factory defaults. • No •Yes MENU → , → → → , → MENU Adjusting the Monitor 40
Page 42
Customized Key You can specify a function which will be activated when the Customized Key ( )is pressed. MENU → , → → , → → , →MENU Off Timer The monitors will turn off automatically at the specified time. • Off •On MENU → , → → , → → , → → , → MENU Auto Source Select Auto Source for the monitor to automatically select the signal source. Adjusting the Monitor 41
Page 43
![Page 43
•
Auto •Manual
MENU → , → → , → → , →MENU
Image Size You can change the size of the screen displayed on your monitor.
• Auto •Wide
• Auto - The screen is displayed in accordance with the screen aspect ratio of\
the input
signals.
• Wide - A full screen is displayed regardless of the screen aspect ratio of t\
he input signals. Note
• Signals not available in the standard mode table are not supported.
• If the wide screen which is the optimal resolution for the monitor is se\
t on your PC,...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-42.png "Page 43
•
Auto •Manual
MENU → , → → , → → , →MENU
Image Size You can change the size of the screen displayed on your monitor.
• Auto •Wide
• Auto - The screen is displayed in accordance with the screen aspect ratio of\
the input
signals.
• Wide - A full screen is displayed regardless of the screen aspect ratio of t\
he input signals. Note
• Signals not available in the standard mode table are not supported.
• If the wide screen which is the optimal resolution for the monitor is se\
t on your PC,...")
• Auto •Manual MENU → , → → , → → , →MENU Image Size You can change the size of the screen displayed on your monitor. • Auto •Wide • Auto - The screen is displayed in accordance with the screen aspect ratio of\ the input signals. • Wide - A full screen is displayed regardless of the screen aspect ratio of t\ he input signals. Note • Signals not available in the standard mode table are not supported. • If the wide screen which is the optimal resolution for the monitor is se\ t on your PC,...
Page 44
![Page 44
Troubleshooting
Self-Test Feature Check
Note
Your monitor provides a self test feature that allows you to check wheth\
er your monitor is
functioning properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.If the monitor is functioning properly, you will see a box in the illust\
ration below. This box appears during normal operation if the video cable becomes disc\
onnected or
damaged.
4. Turn off...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-43.png "Page 44
Troubleshooting
Self-Test Feature Check
Note
Your monitor provides a self test feature that allows you to check wheth\
er your monitor is
functioning properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.If the monitor is functioning properly, you will see a box in the illust\
ration below. This box appears during normal operation if the video cable becomes disc\
onnected or
damaged.
4. Turn off...")
Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check wheth\ er your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor.If the monitor is functioning properly, you will see a box in the illust\ ration below. This box appears during normal operation if the video cable becomes disc\ onnected or damaged. 4. Turn off...
Page 45
![Page 45
Useful Tips
A monitor recreates visual signals received from the computer. Therefore\
, if there is a problem
with the computer or the video card, this can cause the monitor to becom\
e blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case,\
first check the source
of the problem, and then contact the Service Center or your dealer.
Judging the monitors working condition
If there is no image on the screen or a Not Optimum Mode, Recommended Mode 1680
x 1050 60 Hz...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-44.png "Page 45
Useful Tips
A monitor recreates visual signals received from the computer. Therefore\
, if there is a problem
with the computer or the video card, this can cause the monitor to becom\
e blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case,\
first check the source
of the problem, and then contact the Service Center or your dealer.
Judging the monitors working condition
If there is no image on the screen or a Not Optimum Mode, Recommended Mode 1680
x 1050 60 Hz...")
Useful Tips A monitor recreates visual signals received from the computer. Therefore\ , if there is a problem with the computer or the video card, this can cause the monitor to becom\ e blank, have poor coloring, become noisy, and video mode not supported, etc. In this case,\ first check the source of the problem, and then contact the Service Center or your dealer. Judging the monitors working condition If there is no image on the screen or a Not Optimum Mode, Recommended Mode 1680 x 1050 60 Hz...
Page 46
![Page 46
A:
You can see this message when the signal from the video card exceeds the\
maximum
resolution and frequency that the monitor can handle properly.
A: Adjust the maximum resolution and frequency that the monitor can handle \
properly.
A: If the display exceeds SXGA or 75 Hz, a Not Optimum Mode, Recommended
Mode 1680 x 1050 60 Hz message is displayed. If the display exceeds 85 Hz, \
the
display will work properly but the Not Optimum Mode, Recommended Mode 1680
x 1050 60 Hz message appears for one minute...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-45.png "Page 46
A:
You can see this message when the signal from the video card exceeds the\
maximum
resolution and frequency that the monitor can handle properly.
A: Adjust the maximum resolution and frequency that the monitor can handle \
properly.
A: If the display exceeds SXGA or 75 Hz, a Not Optimum Mode, Recommended
Mode 1680 x 1050 60 Hz message is displayed. If the display exceeds 85 Hz, \
the
display will work properly but the Not Optimum Mode, Recommended Mode 1680
x 1050 60 Hz message appears for one minute...")
A: You can see this message when the signal from the video card exceeds the\ maximum resolution and frequency that the monitor can handle properly. A: Adjust the maximum resolution and frequency that the monitor can handle \ properly. A: If the display exceeds SXGA or 75 Hz, a Not Optimum Mode, Recommended Mode 1680 x 1050 60 Hz message is displayed. If the display exceeds 85 Hz, \ the display will work properly but the Not Optimum Mode, Recommended Mode 1680 x 1050 60 Hz message appears for one minute...
Page 47
![Page 47
Q: Have you adjusted the resolution or frequency to the monitor?
A: Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
Q: The screen can be unbalanced due to the cycle of the video card signals.\
Readjust
Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted. Q: Have you adjusted the resolution or frequency on the monitor?
A: Adjust the resolution and frequency of the video card.(Refer to the Preset Timing Modes).
LED is blinking...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-46.png "Page 47
Q: Have you adjusted the resolution or frequency to the monitor?
A: Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
Q: The screen can be unbalanced due to the cycle of the video card signals.\
Readjust
Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted. Q: Have you adjusted the resolution or frequency on the monitor?
A: Adjust the resolution and frequency of the video card.(Refer to the Preset Timing Modes).
LED is blinking...")
Q: Have you adjusted the resolution or frequency to the monitor? A: Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes). Q: The screen can be unbalanced due to the cycle of the video card signals.\ Readjust Position by referring to the OSD. The screen is out of focus or OSD cannot be adjusted. Q: Have you adjusted the resolution or frequency on the monitor? A: Adjust the resolution and frequency of the video card.(Refer to the Preset Timing Modes). LED is blinking...
Page 48
![Page 48
Control Panel
→ Performance and Maintenance → System → Hardware → Device
Manager → Monitors → After deleting Plug and Play monitor, find Plug and Play mon-
itor by searching new Hardware.
A: MagicTune™ is an additional software for the monitor. Some graphic ca\
rds may not
support your monitor. When you have a problem with the graphic card, vis\
it our website
to check the compatible graphic card list provided.
http://www.samsung.com/monitor/magictune
MagicTune™ doesnt work properly. Q:Have you...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-47.png "Page 48
Control Panel
→ Performance and Maintenance → System → Hardware → Device
Manager → Monitors → After deleting Plug and Play monitor, find Plug and Play mon-
itor by searching new Hardware.
A: MagicTune™ is an additional software for the monitor. Some graphic ca\
rds may not
support your monitor. When you have a problem with the graphic card, vis\
it our website
to check the compatible graphic card list provided.
http://www.samsung.com/monitor/magictune
MagicTune™ doesnt work properly. Q:Have you...")
Control Panel → Performance and Maintenance → System → Hardware → Device Manager → Monitors → After deleting Plug and Play monitor, find Plug and Play mon- itor by searching new Hardware. A: MagicTune™ is an additional software for the monitor. Some graphic ca\ rds may not support your monitor. When you have a problem with the graphic card, vis\ it our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune MagicTune™ doesnt work properly. Q:Have you...
Page 49
![Page 49
A: Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Set-
tings.
A: Windows ME/2000: Set the resolution in the Control Panel → Display → Settings.
* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Screen
Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windo\
ws / Computer
Manual).
A: Windows ME/2000: Set...](http://img.usermanuals.tech/thumb/66/52476/w300_samsung_syncmaster_2233sw-user-manual-48.png "Page 49
A: Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Set-
tings.
A: Windows ME/2000: Set the resolution in the Control Panel → Display → Settings.
* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Screen
Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windo\
ws / Computer
Manual).
A: Windows ME/2000: Set...")
A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Set- tings. A: Windows ME/2000: Set the resolution in the Control Panel → Display → Settings. * Contact the video card manufacturer for details. Q: How can I set the Power Saving function? A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windo\ ws / Computer Manual). A: Windows ME/2000: Set...
Page 50
Specifications General General Model Name SyncMaster 2233BW LCD Panel Size 22 inch (55 cm) Display area 473.76 mm (H) x 296.1 mm (V) Pixel Pitch 0.282 mm (H) x 0.282 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7M Resolution Optimum resolution 1680 x 1050@60 Hz Maximum resolution 1680 x 1050@60 Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0.7 Vp-p ± 5 % Separate H/V sync, Composite, SOG TTL level (V high ≥ 2.0 V, V low ≤...