Samsung Syncmaster 2233sw User Manual

Adjusting the Monitor
Direct Functions
AUTO
When the AUTO button is pressed, the auto adjustment screen appears as\
 shown in the
animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog\
 signal. The values
of Fine, Coarse and Position are adjusted automatically.
(Available in 
Analog mode only) If auto adjustment does not work properly, press AUTO button again to \
adjust picture
with more accuracy. If you change resolution in the control panel, auto...

This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent
others from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to act\
ivate the OSD ad-
justment lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to d\
eactivate the OSD
adjustment lock function.
 Note
Though the OSD adjustment lock function is activated, you can still adju\
st the brightness and
contrast, and adjust Customized...

Brightness
When OSD is not on the screen, push the Brightness ( ) button to adjust brightness.
SOURCE Selects the video signal while the OSD is off.
OSD Function Picture
BrightnessContrastMagic-
Bright Color
MagicColorColor ToneColor Con-
trolColor Effect
Gamma Image
CoarseFineSharpnessH-PositionV-Position OSD
LanguageTranspar-
encyDisplay
Time 
  Setup
ResetCustom-
ized KeyOff Timer
Auto
SourceImage Size Information
 Picture
Brightness (Not available in  MagicBright  mode of Dynamic Contrast.)Adjusting...

You can use the on-screen menus to change the brightness according to pe\
rsonal prefer-
ence.
MENU → 
 →   →   ,   → MENU
Contrast (Not available in  MagicBright mode of Dynamic Contrast.) You can use the on-screen menus to change the contrast according to pers\
onal preference.
( Not available in 
MagicColor mode of Full and Intelligent. )
MENU →   →   ,   →   →   ,   → MENU
MagicBright Push the   button to circle through available preconfigured modes.Adjusting the Monitor
33 

MagicBright is a new feature providing optimum viewing environment depending on the\
contents of the image you are watching. Currently seven different modes \
are available: 
Cus-
tom,  Text,  Internet,  Game, Sport, Movie and  Dynamic Contrast . Each mode has its own
pre-configured brightness value. You can easily select one of seven sett\
ings by simply press-
ing Customized Key control button.
• Custom
Although the values are carefully chosen by our engineers, the pre-confi\
gured values may
not be...

•
Off - Returns to the original mode.
• Demo - The screen before applying  MagicColor appears on the right and the screen after
applying  MagicColor appears on the left.
• Full - Displays not only vivid natural color but also more realistic natural\
 skin color with
clearness.
• Intelligent - Displays vivid natural color with clearness.
MENU →   ,   →   → →   ,   → MENU
Color Tone The tone of the color can be changed and one of four modes can be select\
ed.
•
Cool - Makes whites bluish.
• Normal - Keeps...

MENU →   ,   →   →   ,   →   →   ,   →   →   ,   → MENU
Color Effect You can change the overall mood by changing the screen colors.
( Not available in 
MagicColor mode of Full and Intelligent. )
• Off •Grayscale •Green •Aqua •Sepia
• Off - This applies an achromatic color to the screen to adjust the screen e\
ffects.
• Grayscale - The default colors of black and white are displayed.
• Green - This applies the green color effect to a black and white screen.
• Aqua - This applies the aqua color effect to a...

 Image
Coarse Removes noise such as vertical stripes.
Coarse adjustment may move the screen image area. You may relocate it to the c\
enter using
the horizontal control menu.
(Available in 
Analog mode only)
MENU →   ,   →   →   →   ,   → MENU
Fine Removes noise such as horizontal stripes.
If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock
speed).
(Available in 
Analog mode only)
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
37 

Sharpness
Changes the clearance of image.
( Not available in 
MagicColor mode of Full and Intelligent. )
MENU →   ,   →   →   ,   →   →   ,   → MENU
H-Position Changes the horizontal position of the monitors entire display.
(Available in 
Analog mode only)
MENU →   ,   →   →   ,   →   →   ,   → MENU
V-Position Changes the vertical position of the monitors entire display.
(Available in 
Analog mode only) Adjusting the Monitor
38 

MENU →   ,   →   →   ,   →   →   ,   → MENU
 OSD
Language You can choose one of nine languages.
 Note
The language chosen affects only the language of the OSD. It has no effe\
ct on any software
running on the computer.
MENU →   ,   →   →   →   ,   → MENU
Transparency Change the transparency of the background of the OSD.
• Off •On
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
39