Samsung Syncmaster 204bm Quick Start Guide

 
 Quick Setup Guide Warranty Card
 
(Not available in all locations) Users Guide, Monitor Driver, 
Natural Color, MagicTune™, 
Ma
gicRotation software 
   
 
    
 Cable
  
D-Sub Cable  Power Cord Audio Cable 
 
 
   
 Sold separately
 
DVI Cable Set-Bracket Screws (4 EA) 
 
 
 Front 
 

 
 
 
MENU button [ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return 
to the previous menu. 
MagicBright button  
[] 
 
 
 
 MagicBright is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
watching. Currently seven different modes are available: 
Custom, Text, Internet, Game, Sport and Movie, Dynamic 
Contrast. Each mode has its own pre-configured brightness 
value. You can easily select one of seven settings by simply 
pressing...

 
 
  
[]
 
 
Enter button [ ] /  
Source button Activates a highlighted menu item. /  
Push the  , then selects the video signal while the OSD is off. 
(When the source button is pressed to change the input mode, a 
message appears in the upper left of the screen displaying the 
current mode -- Analog or Digital input signal.) 
Note : If you select the Digital mode, you must connect your 
monitor to the graphic cards DVI port using the DVI cable.
AUTO button When the AUTO button is pressed, the Auto...

  
 
 
 
 
DVI IN port  : Connect the DVI Cable to the DVI IN port on the 
back of your monitor. (SOURCE: Digital)
 
 
 
RGB IN port  :Connect the signal cable to the RGB IN port on 
the back of your monitor. (SOURCE: Analog)
 
 
 
Kensington Lock  : The Kensington lock is a device used to 
physically fix the system to something when using it in a public 
place. (The locking device has to be purchased separately.) 
For using a locking device, contact the place of purchase.  
 
 
Stand Stopper : Remove...

 
 
  
  
  
  
 
 
 
Cable Fix Ring: 
When connecting the cable is finished 
fix the cables to the Cable Fix Ring. 
 
  
 
 
AUDIO IN: 
Connect the audio cable for your monitor to the audio port on 
the back of your computer. 
See  Connecting the Monitor  for further information regarding cable connections.
 

 
 
 
 
Connecting the Monitor  
Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
 
Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
 
[ RGB IN ]  
Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI IN port on the back of your monitor.
 
[ DVI...

 
 
 
 
 
Using the Stand  
 
   Removing the base 
HAS Stand
 1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove screws 
(A) and then remove the Stand from the LCD monitor.  
 
 
 Swivel stand
 

 
 
Using ( ),You can swivel the monitor left and right at an angle of 350° to set the 
monitor lengthwise. The rubber under the stand is to avoid the monitor slide.
When you try to rotate the monitor in the state of the power cord or cable 
connecting to the monitor, the power cord of cable can be destroyed. 
 
 
 Tilt angle 
Using ( ), You can adjust the tilt anlgle within a range of -5°(±1.0) forward to 17°
(±1.0) backward for the most comfortable viewing angle.
 
 
Pivot Stand / HAS Stand
 

A.Stand Stopper 
 
 
 
The Auto Rotation may not be supported depend on the monitor model. 
 
If you rotate the screen without lifting it to its maximum height, the screen may be 
damaged because the edge of the screen would hit the floor. 
 
 
   Attaching a Base 
    This monitor accepts a 100 mm x 100 mmVESA-compliant mounting interface pad.
HAS Stand
A. Monitor  
 
B. Mounting interface pad (Sold separately)  
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down...

of the Monitor.  zFor wall mounts that do not comply with VESA standard screw specifications, the length 
of the screws may differ depending on their specifications.  
zDo not use screws that do not comply with the VESA standard screw specifications. 
Do not fasten the screws too tightly, as this may damage the product or cause the 
product to fall, leading to personal injury. 
Samsung is not liable for these kinds of accidents.  
zSamsung is not liable for product damage or personal injury when a...