Samsung Syncmaster 204bm Quick Start Guide

 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation dont 
damage your system.The certified driver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/. 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly...

 
 
   
4. Click 
Advanced Settings….  
  
 
5. Click 
Properties in the 
Monitor tab. If the 
Properties button is deactivated, it 
means the configuration for your monitor is completed. The monitor can be used as is. 
If the message “
Windows needs…” is displayed, as shown in the figure below,  
click 
Continue. 
 
 
    
This monitor driver is under certifying MS logo, and this installation doesnt 
damage your system.  
The certified driver will be posted on Samsung Monitor homepage...

 
 
   
8. Click 
Have Disk… and select the folder (for example, D:\Drive) where the driver setup 
file is located, and click 
OK.  
 
   
9. Select the model that matches your monitor from the list of monitor models on the 
screen, and click 
Next.  
  
 
10.
Click 
Close
→ 
Close 
→ 
OK 
→ 
OK on the following screens displayed in 
sequence. 
   
 

 
   
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click 
Start —> 
Control Panel then click the 
Appearance and Themes Icon.  
 
     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
 

     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be posted on Samsung Monitor...

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
O
K button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings...

 
 
 
   Microsoft® Windows® NT Operating System 
 
1. Click 
Start, 
Settings, 
Control Panel, and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click 
All Display 
Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) 
and then click 
OK.  
4. Click 
Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of...

monitor are the same as the printed or scanned images.  
For more information, refer to Help (F1) in the software program.  
Installing the Natural Color Software 
Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural 
Color screen will appear. Click on Natural Color in the startup window to install the Natural 
Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the Windows [Start] button,...

 
 
1.[]  Use this button for open the on-screen menu and exits from the menu screen or closes 
screen adjustment menu. 
2. [ ]  These buttons allow you to adjust items in the menu.
3. [ ] Press this button to Activates a highlighted menu item.
4. [AUTO]  Press this button to self-adjust to the incoming Analog signal.  
(Available in Analog mode only) The values of fine,coarse and position are adjusted 
automatically.
 
 AUTO 
 

Menu Description
AUTO  When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming Analog 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in Analog mode only) 
 
To make the automatic adjustment function sharper, execute the  AUTO 
function while the  AUTO PATTERN is on. 
 
- If auto adjustment does not work properly, press  AUTO button...