Samsung Sp U300m User Manual

Installation and Connection2-2-1
2-2-1 Installing the Projector
 Install the projector so that the beam from the projector is perpendicular to the screen. 
•Place the projector so that the lens is at the center of the screen. If the screen is not vertically installed, the picture on the 
screen may not be a rectangle. 
•Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed 
clearly.
•When installing the screen in bright...

2-2-3Installation and Connection  
2-2-3 Zoom and Focus Adjustment 
 If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection 
Distance), the focus cannot be adjusted correctly.
 
2-2-4 Screen Size and Projection Distance 
Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality.
If images are not clear, adjust them using the Focus Ring, or move the projector forward...

Installation and Connection2-3-1
  The projection distance is the horizontal distance between the projector and the screen. 
2.When your U300 projector is installed in a location where the projection distance matches the screen diagonal length, you will 
enjoy a clear screen with no distortions (keystone). 
2-3-1 Connecting with a PC 
1.Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2.When connections are all completed, connect both...

2-3-2Installation and Connection  
1.Click the right mouse button on the Windows desktop and click on [Properties]. 
 tab will appear.
2.Click on [Settings] tab and set the  by referring to  described in the display mode table 
supported by this projector.
You do not have to change the  setup. 
3.Press the [Advanced] button. Another property window will appear.
4.Click on [Monitor] tab and set the  by referring to  described in the Supported 
Resolution/Size Modes table. 
This will set both the vertical...

Installation and Connection2-3-2
•This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor.
•Projected images may differ from the monitor depending on the monitor manufacturer or Windows versions.
•When connecting the projector to a PC, check that the PC setup complies to display settings supported by this projector. If 
not, there may be signal problems.
  

2-3-3Installation and Connection  
2-3-3Supported Display Modes
 The optimum resolution is 800 x 600, which is the panel resolution. (If inputted signals are different from the optimal 
resolution, the images may appear distorted.) 
 
2-4 Connecting the Power
Rear of Projector 
1.Connect the adapter to the power port. 
2.Connect the power cord to the adapter and connect it to a wall outlet. 
3.When the power is connected, the screen turns on automatically. Do not look at the lens while connecting the...

Installation and Connection2-5
2-5 Connecting an A/V device with an audio/video cable 
1.Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of the video equipment using a video 
cable. 
Connect the [L-AUDIO-R] input port of the projector to the Audio (L), Audio (R) output ports of the external device, such as a 
DVD, VCR or camcorder using an audio cable.
2.When the connections are all completed, connect both power cords of the projector and the DVD, VCR, or camcorder....

2-7Installation and Connection  
2-7 Connecting a USB Device 
Connect your USB device to the USB port at the back of the projector to play videos, photos, and music. 
 Available file system: FAT, FAT32(NTFS is not supported.)
Multi Partition is not supported.
Multi Reader device is not supported.
 
2-8 Connecting Headphones
Connect the jack of the headphones to the input terminal [ ] on the back of the projector.
2-9 Kensington Lock 
Kensington Lock
A Kensington Lock 
(not supplied) is an anti-theft...

Using3-1
3Using
3-1 Product Features 
• High Mobility Design 
•Small Size. 
•Lightweight.
•Play 
videos, photos, music using a USB device. 
3-2 Front, Upper
 NAMEDESCRIPTION
1.Indicators- STAND BY (Blue LED) 
- LAMP (Blue LED)
- TEMP (Red LED) 
 Refer to the LED Indications. 
2. Move   / Select   /
Volume  button  /  : Use this button to move to or select an item within a menu. 
 : Use this button to adjust the volume.
 3. MENU Button Used to display the Menu Screen.
4. SOURCE Button Use this button to...

3-2Using
 •When using a tripod, make sure to use one with a screw length of 5.5 mm or less. 
If the screw length is longer than 5.5 mm, you will not be able to fix the projector to the tripod firmly, which may result in 
damage to the projector or tripod. 
•If you use screws to hold the tripod, be sure to use Machine screws M1/4 inch or smaller. 
 
6. Focus Ring Used for Focus Adjustment. 
7. Lens-
8-1. Adjustable Feet You can adjust the screen position by moving the adjustable feet up and down. 
8-2....