Samsung Sp U300m User Manual

Using3-3
3-3 Remote Control 
1. POWER Button () 
Use this button for turning  the product on and off. 
2. SOURCE Button 
Used to check or select the conne ction status of external devices.
3. MENU Button   ()
Used to display the Menu Screen.
4. Move ( )/ ( ) Button   
Used to move to or select each menu item.
5. V. KEYSTONE Button   ()
Use this when the screen is displayed in a trapezoid shape. 
6. REWIND button  ()
Rewind the movie in the MEDIA.P mode. 
7. PAGE DN button  ()
Use to select the previous...

3-4Using
3-4 LED Indications 
LED Indications 
:Light is On  :Light is Blinking  :Light is Off
Clearing Indicator Problems 
STAND BYLAMPTEMPINFORMATION
If you press the POWER button on the remote control or projector, the screen
appears within 30 seconds.
The projector is in normal operating condition. 
This state appears when the projector is preparing an operation after the 
POWER button on the projector or the remote control has been pressed.
The POWER button is pressed to turn off the projector, and...

Using3-5
 This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, 
which does not affect the product performance and is part of normal operation.
 
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) 
The Screen Adjustment Menu (OSD: On Screen Display) Structure
CLASSIFICA
TIONSTATEMEASURES
Action 1  When the cooling fan system is 
not in normal operating condi-
tion.If the symptom remains even after disconnecting and then...

3-5Using
 3-5-1. Input
 3-5-2. Picture
MENUDESCRIPTION
Source List  You can select a device connected to the projector to display.
• - -
Edit Name You can edit the names of devices connected to the projector.
• - - - - - - - 
- - - 
MENUDESCRIPTION
Mode Select a screen state which is customized to your projector or change the screen mode as required.
• 
• : Select this mode for a brighter and sharper picture than Standard Mode.
• : This is the picture mode optimized to the standard broadcast signal. 
• :...

Using3-5
MENUDESCRIPTION
Mode •  : Used to adjust the contrast between the object and the background. 
•  : Used to adjust brightness of the entire picture.
•  : Used to adjust the sharpness of the picture. 
•  : Used to adjust color lighter or darker.
 You can only set the  in  mode. 
•  : Used to obtain more natural color of objects using Green or Red enhancement.
 When the input signal is  or PAL and SECAM of the  mode, the  cant be 
adjusted.
 
•  : You can change tint of the entire screen to suit...

3-5Using
 3-5-3. Setup
PC Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If the noise 
is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine 
Adjustment again. 
 Only activated in the PC environment. (component signals are not supported)  
•   : Used to adjust frequency and phase of PC screen automatically. 
•   : Used to adjust frequency when vertical lines appear on PC screen.
•   : Used to fine tune the PC screen. 
•...

Using3-5
3-5-4. Option
Test Pattern Generated by the projector itself. Utilized as standard to optimize the installation of the projector. 
•  - You can check whether the picture is distorted or not. 
•  - You can refer to picture format sizes such as 1.33 : 1 or 1.78 : 1. 
•  - Red Screen, only for color adjustment.
•  - Green Screen, only for color adjustment.
•  - Blue Screen, only for color adjustment.
•  - White Screen, only for color adjustment. 
•  - White Screen, brings out the white tones for a...

4-1Media Play Function  
4Media Play Function
4-1 Precautions on using a USB storage device 
 •This product does not support multi-card readers. 
•This product does not work if the USB storage device is connected by USB HUB. 
•Some products which do not comply with standard USB specifications might not operate normally. 
•A USB storage device with automatic recognition application or its own driver might not operate normally. 
•A USB storage device that uses only a designated driver might not be...

Media Play Function4-2
4-2Photo 
When selecting thumbnails,
You can view image files stored in a USB device.
* Press the MEDIA.P button to display the menu for the selected item.
 To use this function in your presentation, convert general word processor files to image files before saving them to a USB storage 
device.
e.g.) .ppt(Microsoft Powerpoint) 
→ .jpg /.bmp /.gif
.pdf(Adobe Acrobat) 
→ .jpg
Caution: Make sure to save image files to your USB storage device in the order of presentation....

4-2Media Play Function  
Slideshow
You can set several options while playing images.
* Press the MEDIA.P button to display the menu for the selected item.
MENUDESCRIPTION
Slideshow Setting You can set several options while playing images.
•  - 
Transition  Sets a pattern for a slide show.
•  -  -  -  -  - 
 •If the picture size is 32x32 or less,  effect is disabled.
•If you set , you cannot adjust .
•If you set ,  effect is not supported.
 
Speed  Sets a playback speed for a slide show.
•  -  - 
Play...