Samsung Shr5162 N Manual

Cancel
OK
Record Quality & Auto Deletion
 Cam  Normal  Event  Cam  Normal  Event
  1  Level4  Level4  9  Level4  Level4
  2 
Level4  Level4  10  Level4  Level4
  3  Level4  Level4  11  Level4  Level4
  4  Level4  Level4  12  Level4  Level4
  5  Level4  Level4  13  Level4  Level4
  6  Level4  Level4  14  Level4  Level4
  7  Level4  Level4  15  Level4  Level4
  8  Level4  Level4  16  Level4  Level4 
Off
Auto Deletion:
01    Day
MENU SETUPSystem
Camera
Monitoring
Record Mode
Event Record 
Schedule
Backup...

28_ menu setup
 Record Quality
You can set the recording picture quality 
selecting of Level8(High) ~ Level1(Low).
  Auto Deletion
If you select On, you can set the number of 
days for access restriction. If it is set to 3, you 
cannot search the data recorded at the time 
less than 3 days before.
In case of SHR-5082, only 8 channels are 
displayed.
Record Rate & Video Size
When you press the RECORD button, the 
record-related settings are applied.
 IPS (Images per second)
You can set the image...

 
05 MENU SETUP
menu setup _29
EVENT RECORD MODE
The detailed list for event mode settings is as 
follows:
Alarm Detection Setup
 Sensor State 
- 
Off: Sensor does not operate. 
-  N.O (Normal Open): Sensor remains open  all the time. But if it gets closed, an alarm is 
issued. (A Contact)
- 

N.C (Normal Close): Sensor remains closed 
all the time. But if it gets open, an alarm is 
issued. (B Contact)
  Cam
It is used to set a camera that synchronizes 
with the current sensor. The default setting...

30_ menu setup
 Sensitivity
This is used to set the sensitivity for motion 
detection. Available values are Low, Medium, 
and Very High.
  Alarm-Out
It is used to set the Alarm-Out location when 
any alarm occurs. Currently 5 Alarm Outs are 
available. Select an alarm-out to synchronize 
w

ith the current sensor. But multiple values can 
be selected. 
  Duration
It is used to set the Alarm-Out duration. When 
an alarm occurs, the alarm is output for the 
preset time. You can select any of Off, 3sec,...

 
05 MENU SETUP
menu setup _31
In case of SHR-5082, only 8 channels are 
displayed.
Alarm Out Schedule
You can schedule the automatic output for 
alarms.
The scheduling is enabled by selecting alarms, 
days and time blocks. The default setting is 
Event Driven. For each alarm or beep, you can 
activate or deactivate alarming. In case of Event 
Driven, the alarm can be sent only when an 
event is issued.
 
AO >: 
It indicates Alarm Out. All alarms are 
changed according to Alarm1 when it pressed.
   0...

32_ menu setup
 IP
Set the IP address for the main body of the 
product for connecting to the network. If the 
connection mode is set to Static IP, type 
the IP address. If the connection mode is 
Dynamic IP or ADSL(PPPoE), the IP address 
allocated by the DHCP server or ADSL 
company automatically appears. In case of 
DHCP or ADSL connection failure, the value 
“000.000.000.000” is displayed. Then, press 
OK to retry connection for getting the IP 
address. If the connection failure continues, 
turn off...

 If you set up the public DDNS (dyndns.
c
om, no-ip.com, or changeip.com), it will 
take approximately 30 to 60 seconds 
to get the IP address for the host name 
(URL) to be updated in the DNS.
  To connect this product to an IP 
router, you have to designate a port 
for this product in the setup menu of 
the router. This product has 4 ports for 
TCP communication. To use the DHCP 
function provided by the IP router to 
allocate the dynamic IP to the product, 
designate a port for the IP that has 
been...

34_ menu setup
CONFIGURING NETWORK
Port configuration for connecting 
Smart Viewer
 To set the TCP port for DVR registration into 
Smart Viewer, the value should be the same as 
that of this product. 
  To use the IP router, you must forward the 
activated ports.
- 
 For TCP, set the assigned 4 ports in the IP 
Router.
- 

For UDP, set the assigned 4 TCP ports and 
160 UDP ports that is set in the IP Router.
In case of TCP transfer protocol
The ports allocated to the TCP will be used for 
connection...

backup _35
 
06 BACKUP
If there is a predefined device connected, the 
window displays the device information like 
the free space and such. You can also use the 
BACKUP button on the front of your DVR. 
To configure the related settings
1.  Set the start date and time using the Direction buttons and the ENTER button. 
2.  Set the end date and time using the  Direction buttons and the ENTER button.
3.  Select a channel for backup using the  Direction buttons and the ENTER button.
4.  Optional: If you...

36_ PTZ camera control
PTZ CAMERA CONTROL 
MODE
You have to check that proper PTZ camera 
settings are allocated for PTZ device setup in the 
Camera menu.
In case of SHR-5082, only 8 channels are 
displayed.
W
hen the PTZ configuration is complete, the PTZ 
sign ( 
PTZ ) appears on the live screen.
  If you press the ENTER button in the split 
screen, a blue bar appears for selection 
handling. Use the Direction buttons to move 
this bar until you reach the channel having the 
PTZ sign, and press the...