Samsung Shr5162 N Manual

							Real Time DVR
user manual
Thank you for purchasing a Samsung product. 
To receive a more complete service, please 
register your product at
www.samsung.com/global/register
imagine the possibilities
SHR-5082 
SHR-5162 
Code No. AB68-00644A-00
Real Time DVR user manual
Correct Disposal of  This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at 
the end of its working life.  
 To prevent possible harm to the environment or human health from uncontrolled waste disposal, 
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material 
resources.
Household users should contact either the retailer where they purchased this product, or their local government offi ce, for 
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.  This product 
should not be mixed with other commercial wastes for disposal.
SHR-5162_Eng.indb   442007-06-18   ｿﾀﾀ・11:46:52 
						

							key features of your DVR
The Digital Video Recorder (DVR) compresses the acquired images of 8/16 video channels from cameras 
using MPEG-4 technologies, and compresses the 4 channel audio inputs into ADPCM audio file in real time 
to record them on the hard disk or retrieve them from the hard disk simultaneously.
In addition, it transfers the video and audio data through a network in real time and allows you to remotely 
monitor them using your PC.
 8/16 channel Composite Input connectors
  NTSC/PAL video source compatible
  With Dual Codec, can change the FPS (frames per second) accord
 ing to the bandwidth and send live 
pictures regardless of the recording condition
  Picture quality improvement by adopting the De-interlace chip
  Can display HDD information and status using the HDD SMART func
 tion
  Can convert the CIF (NTSC: 352*240, PAL: 352*288) images to 120
  IPS images for NTSC or 100 IPS 
images for PAL
  8/16 channel loop through video connectors
  Hard disk overwrite mode
  USB 2.0 hard disk backup capability for large quantities of data
  Backup function using USB 2.0 memory and external CD/DVD writer
  (Built-in DVD-RW included)
  Can record, play, and transmit audio/video data to Windows Netw
 ork Viewer (Smart Viewer) simultaneously
  Can record or play 8/16 channel video data
  Various search modes (time/date, event, schedule)
  Various recording modes (time lapse, event, schedule)
  Extended hard disk connection (USB 2.0)
  Alarm interface function (Input: 8/16, Output: 4, Reset: 1)
  Remote monitoring function using Windows Network Viewer (Smart 
 Viewer)
WHAT’S INCLUDED WITH YOUR DVR
Upon delivery of this product, you shall unwrap and put it on the even floor or where you want to use it. Then 
you must check if the following items are in it.
Remote control unit 
(RCU)One power cordSmart Viewer 
software CD (PDF 
manual included)Two brackets
Brackets are used to 
attach the product to the 
rack
Special 4 screws2 EA of RS-485/ 
Alarm terminal blockUser manual2 EA of AAA batteries
SHR-5162_Eng.indb   22007-06-18   ｿﾀﾀ・11:46:56 
						

							safety regulations
Please be sure to keep the following in mind for the right use of the product to prevent proprietary 
risk or damage.
 Do not use multiple plugs at once.
 
This may cause abnormal heat generation or fire
 Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you.
 
This may cause fire.
 Do not bend the power cord forcibly nor put a heavy material on it.
 
This may cause fire.
 Do not touch the power plug with wet hands.
 
This may cause electric shock.
 Insert the power plug firmly enough not to shake.
 
This imperfect connection may cause fire.
 Keep the product off humidity, dust, or soot.
 
This may cause fire or electric shock.
 Do not put metals (coin, hair pin, metal piece, etc.) or inflammable materials (match, 
paper, etc.) in the ventilation hole.
 
This may cause fire.
 Keep the surrounding temperature between 0°C to 40°C and keep the product off 
humidity.
 
This may cause breakdown.
 Secure sufficient ventilation.
 
This may cause abnormal operation due to high temperature.
 Keep the product off direct ray of light or heat from the heating device.
 
This may cause fire.
 Do not disassemble, repair, or remodel the product.
 
This may cause fire, electric shock, or injury due to abnormal operation.
 Do not pull out the power cord.
 
This may destroy the power cord, eventually, cause fire or electric shock.
 Plug out in the event of thunder or lightning.
  This may cause fire.
 Keep your children off the battery after you take it out of the product. They tend to 
swallow it unconsciously.
 
If your children swallow it, please see the doctor immediately.
 Install the product at a safe place or attach the product to the wall or ceiling with a stand 
firmly enough not to fall to the ground.
 
This may injure people.
SHR-5162_Eng.indb   32007-06-18   ｿﾀﾀ・11:46:59 
						

							before start
This user’s manual provides Information for using DVR such as brief introduction, part names, 
functions, connection to other equipment, menu setup, and the like.
You have to keep in mind the following notices:
 SEC retains the copyright on this manual.
  This manual cannot be copied without SEC’s prior written approv
 al.
  We are not liable for any or all losses to the product incurred by  your use of non-standard 
product or violation of instructions mentioned in this manual.
  If you want to open the case of your system for checking problem
 s, please consult the expert 
from the shop where you bought the product.
  You may download open source codes from the following website: 
 http://www.samsung.com.
  Before installing any external device such as external memory or  HDD, please check the 
compatibility of the device with Samsung DVR. The list of the compatible devices with Samsung 
DVR can be obtained from your vendor.
  Apparatus shall not be exposed to dripping or splashing and no 
 objects filled with liquids, such 
as vases, shall be placed on the apparatus.
  The Mains plug is used as a disconnect device and shall stay rea
 dily operable at any time.
WARNING
Battery
Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the 
same type of battery as the one being used in the product.
The following are the specifications of the battery you are using now.
 
  Normal voltage: 3V
  Normal capacity: 170mAh
  Continuous standard load: 0.2mA
  Operating temperature:  
 -20 to +85°C 
(-4 to +185°F)
System Shutdown
Turning off the power while the product is in operation, or taking not permitted actions may cause 
damage to the hard drive or the product. Also it can cause a dysfunction to the hard disk while 
using the product. Please turn off the power using the Power button on the front of your DVR. 
After selecting OK in the pop-up menu, you can pull off the power cord.
You may want to install a UPS system for safe operation in order to
  prevent damage caused by an 
unexpected power stoppage. (Any questions concerning UPS, consult your USP retailer.)
Operating Temperature
The guaranteed operating temperature range of this product is 0°C to  40°C (32°F to 104 °F).  
This product may not work properly if you run right after a long period  of storage at a temperature 
below the guaranteed one.
When using the device after a long period of storage at low temperatu
 re, place the product at room 
temperature for a while and run it.
Especially for the built-in HDD in the product, its guaranteed temper ature range is 5°C to 55°C  
(41°F to 131 °F). Likewise, the hard drive may not work at a temperatu

re below the guaranteed one.
STANDARDS APPROVALS
This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. 
This equipment generates, uses, and can radiate radio frequency ene

rgy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own 
expense.
CALIFORNIA USA ONLYThis Perchlorate warning applies only to primary CR (Manganese Dioxide) 
Lithium coin cells in the product sold or distributed ONLY in California USA.
“Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.”
SHR-5162_Eng.indb   42007-06-18   ｿﾀﾀ・11:47:00 
						

							contents _01
INTRODUCING YOUR REAL TIME DVR
03
INSTALLATION
08
CONNECTING WITH OTHER  DEVICES
12
LIVE
15
MENU SETUP
20
BACKUP
PTZ CAMERA CONTROL
36
RECORDING
39
03  Controls on the DVR
05  Rear panel jacks
06  Remote contr
 ol
08  Checking installation envir
 onment
08  Hdd addition
12  Connecting video, audio, and monitor
12  Connecting the network
13  Connecting the USB
13  Connecting the alarm input/output
14  Connecting the RS-485 device
15  Operating the system
15  Live scr
een mode
17  Setting audio on/of f
18  Freezing and zooming
18  Event monitoring
19  Spot-out monitoring
20  Befor
e use
20  System
25  Camera
26  Monitoring
27  Recor
d mode
29  Event record mode
30  Schedule
31  Network
34  Configuring network
35  Backup
36  PTZ camera control mode
36  Basic PTZ operations
37  Pr
eset setup
37  Camera menu setup
38  Pr
eset view
38  Other view
39  Rec (normal r
 ecording)
39  Record schedule
contents continued next page
SHR-5162_Eng.indb   12007-06-18   ｿﾀﾀ・11:47:00 
						

							02_ contents
SEARCH AND PLAY
40
Smart Viewer
44
APPENDIX
68
40 Before use
40  Calendar sear ch
40  Event sear ch
41  Date time sear ch
41  Go to first sear ch
42  Go to last sear ch
42  Backup sear ch
42  Playback
44  Intr
oduction
44  Main featur es
44  PC specification (recommended)
44  Smart Viewer installation
45  Smart Viewer pr
ogram execution
46  Smart Viewer initial scr een
46  Setup mode
57  Monitoring mode
64  Sear
ch mode
68  Pr
oduct specification
71  Outline drawings
73  Factory default
76  T
roubleshooting (FAQ)
79 Open sour ce license report on the product
SHR-5162_Eng.indb   22007-06-18   ｿﾀﾀ・11:47:00 
						

							 
01 INTRODUCING
introducing _03
CONTROLS ON THE DVR
introducing your real time DVR
1. ALARM LED
Lights when an event occurs.
HDD LED
Lights when the hard disk is operating. When the HDD is accessed, LED repeatedly blinks.
NETWORK LED
Lights when the data is transferred through the network.
BACKUP LED
Lights when a backup is in progress.
REC LED
Lights when a recording is in progress.
2. PTZ Button
Toggles PTZ mode On and Off.
ZOOM(TELE) Button
Implements the digital zoom (x2). Performs the TELE function in PTZ mode.
FREEZE(WIDE) Button
Performs the FREEZE function in live mode. Performs the WIDE function in PTZ mode.
SEARCH(VIEW) Button
Goes to the Search function window. Performs the Preset View function in PTZ mode.
MENU(PRESET) Button
Goes to the system menu screen or moves to the upper menu. Performs the Preset Setup function in PTZ mode.
987
1
6
324
5
987
1
6
324
5
5162 5082
SHR-5162_Eng.indb   32007-06-18   ｿﾀﾀ・11:47:02 
						

							04_ introducing
3. REC Button
Starts or ends the recording
(Fast/Step Rewind) Button
- Step Rewind: Used for backward scene-by-scene search while at pause.
- Fast Rewind: Used for quick backward search while in play. (-x2, -x4, -x8, -x16, -x32, -x64)
(STOP) Button
Ends search while in play.
(PLAY/PAUSE) Button
Pauses and resumes the screen play.
(Fast/Step Forward) Button
- Fast Forward: Used for quick forward search while in play. (x2, x4, x8, x16, x32, x64)
- Step Forward: Used for forward scene-by-scene search while at pause.
4. Direction Buttons
Used for changing settings or for moving the cursor up/down/left/right.
5. MODE Button
When pressed in live mode, it sequentially display 16-split, 9-split, 4-split, 6-split, 7-split, 8-split, Picture in Picture (PIP), 
and single sequence.
When pressed in playback mode for playback-exclusive channels (16, 9, 4), it sequentially displays single channel, 1 
playback channel with 1 live channel, 1 playback channel with 8 live channels, 1 playback channel with 12 live channels, 
and 1 playback channel with 15 live channels.
AUDIO Button
Toggles Audio On and Off.
ALARM Button
Turns off the alarm LED and stops the sound when an alarm is issued.
Alarm icon disappears when the alarm button is used.
BACKUP Button
Press it for backup operation. 
6. USB Port
Use it to connect USB type devices.
7. Channel Button
Select a single channel (1 to 16) while in live mode.
8. Eject Button
Opens the DVD-RW tray.
9. Power LED
Displays power On/Off state.
Power Button
Press to turn on the power or shut down your DVR in live mode.
CAUTION
Do not install DVR on the carpet or other soft material to prevent clogging of the air ventilator.
To install DVR on the cabinet or rack, be sure to check the ventilation condition.
SHR-5162_Eng.indb   42007-06-18   ｿﾀﾀ・11:47:03 
						

							 
01 INTRODUCING
introducing _05
REAR PANEL JACKS
5082 REAR
5162 REAR
910111212435687
1VIDEO OUTComposite video output port (BNC type connector)
2AUDIO OUTAudio output port (RCA jack)
3VGAaVGA video output port
4S-VIDEOS-VIDEO video output port
5NETWORKNetwork connection port
6AUDIO INAudio input port (RCA jack)
7SPOTSPOT1: 1 channel exclusive SPOT output
SPOT2: The same output as the Main VIDEO OUT (OSG is not displa
yed)
8USBUSB connection port
9ALARM- ALARM 1–16: Alarm input port
- ALARM RESET IN: Alarm reset port
- ALARM OUT 1–4: Alarm output port
- TX+, TX-, RX+, RX-: RS-485 communication
10THROUGH
You may use THROUGH port to transmit a video signal to the other video 
equipment.
11VIDEO IN Composite video input port (BNC type connector)
12AC-INAC 100 ~ 230V (PAL)
AC 110 ~ 220V (NTSC)
910111212435687
SHR-5162_Eng.indb   52007-06-18   ｿﾀﾀ・11:47:07   
						

							06_ introducing
REMOTE CONTROL
RECORD
Starts or ends the 
recording. 
OPEN/CLOSE
Used to open and close 
the DVD-RW tray.
0~9
Selects a single channel 
while in live mode. Used  for inputting numeric  values. 
REC LOCK
Locks the record function.
AUDIO
Toggles Audio On and 
Off.
BACKUP
Press it for backup 
operation.ALARM
Cancels sending alarms.MODE
Select a split screen.
FR (fast rewind) 
FR (fast reverse): Used for quick backward search while in play. (-x2, -x4,  -x8, -x16, -x32, -x64)
STOP 
Ends playing. 
FF (fast forward) 
 
Used for quick forward 
search while in play. (x2, 
x4, x8, x16, x32, x64)
Play/Pause Pauses or resumes 
playing. 
MENU
Goes to the system menu 
screen or moves to the  upper menu. ZOOM
Implements the digital 
zoom (x2).
SEARCH
Goes to the search select 
screen.FREEZE
Performs the FREEZE 
function in live mode. 
UPDOWN
LEFT

RIGHT 
Used for changing 
settings or for moving the  cursor up/down/left/right.
ENTER Shows the cursor for 
channel selection in live 
mode or used as the 
selection button for menu 
configuration. 
PTZ
Toggles PTZ mode On 
and Off. TELE
Performs the TELE 
function in PTZ mode.WIDE
Performs the WIDE 
function in PTZ mode. 
SYS ID
Use for inputting or 
confirming system or 
remote control ID. PRESET
Performs the PRESET 
function in PTZ mode. VIEW
Performs the VIEW 
function in PTZ mode.
Using the NUMERIC Buttons  CHANNEL 1–9 Press the 1 to 9 button respectively.
  CHANNEL 10 Press the 0(10+) button, release, and press the 0 button again with in 3 seconds.Or press the 0(10+) button, 
release, and wait 3 seconds. 
  CHANNEL 11–16 Press the 0(10+) button, release, and press the 1 (or 2, 3, 4, 5, 6) button  again within 3 seconds.Changing the Remote Control IDAs you press the SYS ID button, input the desired 2-digit ID in order (Remote control default ID: 00). 
For instance, to change the remote control ID to 08, press the SYS ID button, and then input 0 and 8 buttons in order.
After the input completes, press the SYS ID button again in order to confirm the setting.
SHR-5162_Eng.indb   62007-06-18   ｿﾀﾀ・11:47:08