Samsung Shr5162 N Manual

							Smart Viewer _47
 
10 Smart Viewer
1.  These buttons enable you to select setup items for DVR Setup, Viewer Setup, Site 
Setup, and S/W Version.
2. 

In this box, you can set the details on each 
setup item. 
3. 

Using this button, you can exit from the 
current window.
4. 

You can use buttons for saving the modified 
data, returning the previous settings, and 
exiting from the setup window.
  Setup Item Selection buttons
- 
DVR Setup: Allows you to modify the 
settings of the DVR.
-  Viewer Setup: Allows you to configure the 
settings of Smart Viewer.
-  Site Setup: Allows you to set the DVR 
information which includes the name, IP 
address, ID, and password for connection. 
It can also allow you to register DVRs into a 
site.
-  S/W Version: Shows the software 
information such as Smart Viewer version, 
system requirement, and the DVR system 
S/W version. You can remotely upgrade the 
system software.
   
  Save/Cancellation of Revised Information
 
Click  Apply  to save the revised information and 
click Cancel to return the previous settings.
  Closing the setup window
 
-  Click X or Close to exit from the setup  window.
- 
If any setting is revised, the following 
message box appears. If you press OK, the 
revised information is saved and the setup 
window exits. If you press CANCEL, the  
revised information is lost and the setup 
window exits.
DVR Setup
Click DVR Setup for configuring DVR-related 
settings. It means that you can remotely 
configure the settings of DVR using Smart 
Viewer. The DVR setup items are System, 
Camera/Audio, Monitoring, Recording, and 
Network.
You can access to DVR Setup with the 
Admin privilege. The button will not be 
activated when you are connected to the 
DVR with a user privilege.
1
2
1.  The DVR names connected with the Admin 
privilege will be listed here. When connected 
to a DVR, the DVR name is displayed. When 
connected to a site, the names of DVRs with 
the Admin privilege are displayed. You can 
select a DVR to configure the settings of it.
 
2.  It displays the setup menu for the selected  DVR.
  
 System
You can configure the system-related settings. 
F
 or more details, see Chapter 5, “Menu Setup.”
-   System Information It shows the information of the selected 
DVR.
SHR-5162_Eng.indb   472007-06-18   ｿﾀﾀ・11:49:32          
						

							48_ Smart Viewer
For more details, see Chapter 5, “Menu 
Setup.”
-  Admin Password
You can change the Admin password 
related settings for control of DVR.
- 

User Password
You can change the user password 
related settings for control of DVR.
CAUTION
For the system password, you can 
input numeric values only up to 8 
digits.
  The Delete key and key combinations 
like CTRL+C and CTRL+V in the 
keyboard are not supported for input of 
system password.
  For deletion of any input value, use the 
BACKSPACE key.
  The default system password is “4321.”
- 

Date/Time Setup
Date/Time is used to set the information of 
DVR such as date, time, format, and DST.
  If you change the values for date and 
t
ime, the DVR automatically disconnects 
the communication with Smart Viewer 
to apply the settings. 
  When updating the date and time for 
the DVR completes, you can connect 
Smart Viewer.
  But, the values for display format and 
DST can be set without disconnection.
- 

System Language
You can set the display language for the 
DVR.
  This change results in modification 
of display language on the DVR. 
The language of Smart Viewer is not 
changed.
  Language specification is subject to 
change.
SHR-5162_Eng.indb   482007-06-18   ｿﾀﾀ・11:49:35    
						

							Smart Viewer _49
 
10 Smart Viewer
-  Storage SetupIt displays the information of the HDD that 
is contained in your DVR. Also you can 
d
etermine whether or not to repeat recording 
and make a beep sound when any disk 
failure happens.
-  Remote Control Device You can configure the settings for the 
remote control that is installed in the DVR 
system. You can toggle between On and 
O
ff. The remote control ID can be set among 
0 to 99.
If you have directly installed the remote 
control in the DVR system and activated 
the setup, PTZ controls are not enabled 
using Smart Viewer.
  Camera
You can configure the camera-related settings. 
F

or more details, see Chapter 5, “Menu Setup.”
-  Camera Configuration. This configures the camera-related settings 
such as video/audio availability, camera title, 
and auto sequencing interval for the DVR. 
CAUTION
 Only English is available for the title. 
If you enter the title in your local 
language and apply it, a warning 
message appears to ask you to 
retype it.
  You can input the title up to 15 
digits.
  If you leave the title blank, a warning 
message appears to ask you to 
retype it.
SHR-5162_Eng.indb   492007-06-18   ｿﾀﾀ・11:49:39      
						

							50_ Smart Viewer
 The Delete key and key combinations 
like CTRL+C and CTRL+V in the 
keyboard are not supported for input of 
camera title.
  For deletion of any input value, use the 
BACKSPACE key.
- 

PTZ Device
You can configure the settings for PTZ 
cameras, which include camera ID, protocol, 
baud rate, parity, data bit, and stop bit. 
   Monitoring Setup
You can configure the monitoring-related 
settings. For more details, see Chapter 5, 
“Menu Setup.”
  Recording
You can configure the recording-related 
settings. For more details, see Chapter 5, 
“Menu Setup.”
- 
 Record Quality and Auto Deletion
You can configure the settings for recording 
quality and auto deletion. 
-  Record Rate & Video Size You can configure the settings for record 
rate (recording speed) and video size 
(resolution). 
NTSC
PAL
-  Event Record DurationYou can configure the pre-event and post-
event settings for event recording. 
SHR-5162_Eng.indb   502007-06-18   ｿﾀﾀ・11:49:41      
						

							Smart Viewer _51
 
10 Smart Viewer
-  Alarm Detection SetupIt configures the settings for alarm recording.
More than one camera should be 
selected to apply the alarm.
- 
Motion Detection Setup
It configures the settings for recording 
through motion detection.
-  Video Loss Setup It configures the video loss related settings.
 Schedule
You can configure schedule-related settings. 
For more details, see Chapter 5, “Menu 
Setup.” 
- Record Schedule You can change the schedule recording-
related settings.
- Alarm Out ScheduleYou can change the alarming schedule-
related settings.
SHR-5162_Eng.indb   512007-06-18   ｿﾀﾀ・11:49:44       
						

							52_ Smart Viewer
 Network
Y
ou can configure the network-related settings. 
For more details, see Chapter 5, “Menu Setup.” -  Network Password You can set both Admin password and user 
password for connecting to the DVR system 
through the network using Smart Viewer.
CAUTION
 For the network password, you can 
input numeric values only up to 8 
digits.
  If you leave the password blank 
and apply it, a warning message 
appears to ask you to retype it. 
 The Delete key and key combinations 
like CTRL+C and CTRL+V in the 
keyboard are not supported for input of 
password.
  For deletion of any input value, use the 
BACKSPACE key.
  The default Admin password is “4321.”
  The default user password is also 
“4321.”
- 

IP Settings
It configures the network IP settings for the 
DVR. 
 
CAUTION
  Be sure to inquire of the network 
manager about the settings.
  Both ADSL ID and password can 
be input up to 40 letters including 
alphabets, numbers, and special 
characters.
- 

Transfer Protocol Settings
You can change the transfer protocol-related 
settings
-  Callback Settings You can configure the callback-related 
settings for DVR.
-  Picture SettingsThis configuration is used to set the video 
size and quality for transferring pictures.
SHR-5162_Eng.indb   522007-06-18   ｿﾀﾀ・11:49:48      
						

							Smart Viewer _53
 
10 Smart Viewer
Viewer Setup
Click Viewer Setup for configuring the Smart 
Viewer related settings. This Viewer Setup 
consists of 5 different items: Video Recording, 
File Converting, Sequence Time, OSD Display, 
and Auto Connection.
1
2
3
5
4
6
87
1.  The currently displayed video data can be saved in a DVR format (*.dvr) file. The related 
settings are made here.
2. 

A DVR file can be converted into a JPEG 
or AVI file. The destination folders are 
determined here.
3. 

You can set the sequence time (or screen 
change time) interval for the auto sequence 
mode.
4. 

The OSD display on Smart Viewer can be 
decided here.
5. 

You can decide whether Smart Viewer 
automatically connects to the designated 
DVR or site when it starts running.
6. 

You can enable/disable alarming and set the 
alarming duration.
7. 

You can set the port for callback connection.
8.  You can set the language for display.
  Video Recording
- 
 Naming convention
 
When recording the currently displayed 
video data into DVR files, you can assign 
the file naming rule to DRV files. 
- 

Location
 
5162/5082
-  Recording Time
You can set the maximum recording time when 
saving the video data. You can set the time 
ranging from 1 to 10 minutes. If the recording 
time exceeds the preset value, the program 
stops recording.
  File Converting
 
5162/5082
You can convert a DVR file saved on your PC 
into JPEG or AVI. The default destination folder 
for file conversion is < Smart Viewer directory>\
frame.” You can change it on your own.
  Sequence Time
 
In monitoring mode, when the screen change 
(auto sequence) mode is active, the camera 
channels change at an interval of this time. You 
can set the time ranging from 5 to 30 seconds.
  OSD Display
 
You can set if OSD shall be displayed on each 
channel of Smart Viewer. However, the icons 
for audio, PTZ, recording, and alarm/motion 
event are normally displayed regardless of this 
setting.
  Callback Connection
 
Set the port for callback connection.
  Auto Connection
You can set if Smart Viewer is automatically 
connected to the selected DVR or site when 
starting the program. If you check Auto 
Connection Enable, available DVRs and 
sites are displayed in the pull-down list. After 
selecting one from the list, Smart Viewer 
connects to the selected DVR or site whenever 
it is started.
 
SHR-5162_Eng.indb   532007-06-18   ｿﾀﾀ・11:49:51              
						

							54_ Smart Viewer
 Language
 
You can set the language to be displayed on 
Smart Viewer.
Site Setup
Click Site Setup for configuring the site-related 
settings. Smart Viewer connects to the DVR or 
site that has been registered here. A site can 
have multiple DVRs.
1
3
52
4
1.  The registered DVRs are displayed.
2.  You can use the buttons for adding/deleting/ editing DVRs.
3. 

Use the button to move the selected DVR to 
the selected site. But, if the selected DVR is 
set to ADSL Network, it cannot be moved to 
the site.
4. 

The registered sites are displayed.
5.  You can use the buttons for adding/deleting/ editing sites.  
DVR List
 
 The DVRs that you want to connect using 
Smart Viewer are listed in DVR List. You can 
register a new DVR, or delete/edit the selected 
DVR. The name and IP/MAC address of the 
registered DVR are displayed. If the DVR uses 
a static IP, select Static IP in Address Type, 
enter the name of DVR in Name, and the IP 
address in IP Address. 
Set the port number in Port No. so that it 
matches the port number that you’ve set in the 
network menu of DVR. For connecting to the 
DVR, you need to set both Admin password 
and user password. 
If your DVR uses a dynamic IP such as in a 
cable modem, VDSL, and PPPoE for ADSL, 
set the address in MAC Address.
Set the port number in Port No. so that it 
matches the port number that you’ve set in the 
network menu of DVR. 
SHR-5162_Eng.indb   542007-06-18   ｿﾀﾀ・11:49:53       
						

							Smart Viewer _55
 
10 Smart Viewer
If you have selected Use DDNS in the 
Network Settings menu of DVR or used an IP 
splitter to register a URL using DDNS, you can 
connect through the designated URL.
I
f you want to connect through the URL, 
select  URL in Address Type  and enter the 
URL set in  URL.
Set the port number in Port No. so that it 
matches the port number that you’ve set in the 
network menu of DVR. 
  The MAC address of DVR is written on 
the side label of the product. It is also 
found in the system information on the 
DVR setup menu.
  If the DVR is connected to ADSL, a 
low network bandwidth is available. 
Accordingly, the transfer rate becomes 
low and Smart Viewer limitedly 
operates.
  Smart Viewer can monitor up to 16 
channels at the same time.
  Smart Viewer can search or play one 
channel only.
  The audio does not play.
  The playback frame speed is 0.5 ips in 
average and it may vary depending on 
the number of channels and video size.
To delete an existing DVR, click Delete. 
To delete a DVR from the list, click Delete. Then 
the following message appears. Click OK to 
confirm it.
When the DVR to be deleted is connected 
to Smart Viewer, the following message also 
appears. If you really want to delete the DVR, 
disconnect the DVR and retry to delete it. 
To edit the existing DVR, click Modify. 
After modifying the settings, click OK.
When the DVR to be modified is connected to 
Smart Viewer, the following message appears. 
If you really want to modify the DVR, disconnect 
the DVR and retry to modify it.
  Site List
You can assign multiple DVRs (up to 9) to a 
site for control. You can register a new site and 
delete or edit the selected site in the registered 
list. After sites are correctly constructed, you can 
add or delete DVRs for the selected site.
To add a new site, click New. 
After pressing New, the following window 
appears. You can enter the name of site and 
click OK.
SHR-5162_Eng.indb   552007-06-18   ｿﾀﾀ・11:49:55          
						

							56_ Smart Viewer
The site name can be input in both 
English and Korean up to maximum 10 
letters.
To delete an existing site or DVR, use Delete. 
After selecting a site or DVR and click Delete, 
the following message appears. Click OK to 
confirm it. After this action, the DVR name 
is deleted but the information of DVR is not 
removed. 
When the site to be deleted is connected to 
Smart Viewer, the following message appears. If 
you really want to delete the site, disconnect the 
site and retry to delete it.
To edit an existing site, click Modify.
Change the site name.
When the site is connected to Smart Viewer, the 
following message appears. If you really want to 
modify the name of site, disconnect the site and 
retry to modify it.
When you select a DVR in the site list and click 
Modify, the following message appears. 
To edit the DVR, go to the DVR list.
To add a DVR to the site, select a DVR and click 
Add. 
If you click Add, the selected DVR is added to 
the selected site. But the ADSL-enabled DVR 
cannot be added to the site. If you click Add to 
add a DVR while any site is not selected, a new 
site named “Site [0]” is created by default and 
the selected DVR is added in it. When you select 
the connected DVR and click Add, the following 
message appears. If you really want to add the 
DVR, disconnect the DVR and retry to add it.
S/W Version
When you click S/W Version, the program 
displays the software-related information such as 
Smart Viewer version, system requirements, and 
the version information on the connected DVRs.
 You can also upgrade the DVR system software 
remotely, and import and export the DVR-related 
settings. Only the Admin user can perform these 
functions. 
2 1
1.  Displays the version and system  requirements of Smart Viewer.
2. 
Displays the version and name of DVR if any 
DRV is connected to Smart Viewer. This 
area can also provide functions for remotely 
upgrading the DVR software, extracting, and 
recovering the DVR settings.
SHR-5162_Eng.indb   562007-06-18   ｿﾀﾀ・11:49:58