Samsung Shr5162 N Manual

PTZ camera control _37
 
07 PTZ camera control
 PAN
Use the LEFT/RIGHT buttons on the front 
panel or remote control in PTZ Camera Control 
Mode to control the camera horizontally.
  TILT
Use the UP/DOWN buttons on the front panel 
o

r remote control in PTZ Camera Control Mode 
to control the camera vertically.
  ZOOM
Press the TELE/WIDE buttons on the front 
panel or remote control in PTZ Camera Control 
Mode to zoom in or out the image displayed.
PRESET SETUP
A preset is a specific position of the...

38_ PTZ camera control
PRESET VIEW
The preset setup allows you to move to a preset 
position using the PTZ camera.
Press the VIEW button on the front panel or 
remote control in Single Screen PTZ Camera 
Control Mode to select Preset. 
Scroll down the cursor until it reaches the preset 
position that you want and you can check it from 
the screen to the right.
OTHER VIEW
Press the VIEW button on the front panel or 
remote control in Single Screen PTZ Camera 
Control Mode to use other viewing controls....

recording _39
 
08 RECORDING
REC (NORMAL RECORDING)
Pressing the RECORD button starts recording 
as set in the Record Mode. Then the REC LED 
lights and the Recording icon appears on the 
screen. While recording on HDD is in progress, 
the HDD LED blinks.
During recording, you can stop it by pressing the 
RECORD button again. If the recording stops, 
the REC LED goes out.
WARNING
If the work that needs to stop the 
recording (time change, file deletion, 
HDD connection/disconnection, etc.) 
is executed...

search & play _41
40_ search & play
 
09 SEARCH & PLAY
search & play _41
40_ search & play
 
09 SEARCH & PLAY
BEFORE USE
When you press the SEARCH button, the 
Search window appears after user validation 
checkup. Available menus are like the following: 
 
  Calendar: Searches the recorded video 
images using the calendar to select the wanted 
time.
  Event: Searches the recorded video images 
using events.
  Date/Time: Searches the recorded video 
images using the input date and time.
  Go To First:...

search & play _41
40_ search & play
 
09 SEARCH & PLAY
search & play _41
40_ search & play
 
09 SEARCH & PLAY
To perform an event search
1.  Use the UP/DOWN direction buttons to 
place the cursor to the wanted channel and 
press the ENTER button. Then the recorded 
events are displayed below. Each event 
contains the date/time and event mode 
(normal recording, schedule recording, etc.). 
Only one channel can be selected.
2.  Use the DOWN direction button to move  to the event table and press the ENTER...

search & play _43
42_ search & play
 
09 SEARCH & PLAY
search & play _43
42_ search & play
 
09 SEARCH & PLAY
GO TO LAST SEARCH
In case of SHR-5082, only 8 channels are 
displayed.
To perform this function
1.  Use the UP/DOWN direction buttons to 
place the cursor to the wanted camera and 
press the ENTER button. The selected 
c

amera is marked. Selection of multiple items 
is possible. If you want to move to the next 
page for selecting the other cameras, press 
9-16. 
2.  Now press Start to play the...

search & play _43
42_ search & play
 
09 SEARCH & PLAY
search & play _43
42_ search & play
 
09 SEARCH & PLAY
  Playback mode 
You can change the screen display method 
using the MODE button and NUMERIC 
buttons as shown in the figure. The 16-split, 
12+1 split, and 15+1 split screens are shown 
only in SHR-5162.
-  Single screen: Comes up when you select 
and play only 1 channel using the Search 
menu.
-  4-split screen: Comes up when you select 
and play 2 to 4 channels using the Search 
menu.
-...

44_ Smart Viewer
INTRODUCTION
Smart Viewer is a program to be installed on 
your PC. Using this program, you can monitor 
the video and audio data in real time through the 
network environment without accessing the site 
where the product is installed.
MAIN FEATURES
 MPEG-4 Video Compression: It provides 
good video quality.
  G.711 Voice Compression: It provides good 
audio quality and use of directional MIC can 
improve the quality of remote voice.
  Transmission of video/audio streams 
through RTP...

Smart Viewer _45
 
10 Smart Viewer
5.  After reading the license agreement, click Yes to proceed to next step.
6.  Set the destination folder to install the Smart Viewer program and click Next.
7.  The installation process proceeds with setup file installation and system setup.
8.  When installation is complete, click Finish to exit from the process.
Smart Viewer PROGRAM 
EXECUTION
Double-click the Smart Viewer icon on the 
Desktop to execute the program.
SHR-5162_Eng.indb   452007-06-18   ｿﾀﾀ・11:49:26...

46_ Smart Viewer
Smart Viewer INITIAL SCREEN
1
23
4
6
11
14
13
128
9
5
7
10
1.  This screen shows the monitoring sites.
2.  Using these buttons, you can enter the Search mode in which you can search 
and play the remote video file that has 
been recorded on your DVR and enter the 
Monitoring mode for real-time monitoring.
3. 

These buttons minimize and exit the 
program.
4. 

It displays the current date, day, and time.
5.  This button is used for connection to the  preset DVR or site.
6. 

These...