Samsung Sdr3102 N Manual

							English _31
evenT monITorInG
This will display the channel in sync with a specific event (Motion/Tampering/Video Loss) if it occurs. 
In “monitor > event display”, set the event monitoring to ON/OFF and specify the event display t\
ime. (Page 51)
•	 If multiple events occur simultaneously, the screen will switch to a split mode.
 
- 2~4 events : 4-split mode 
- 5~9 events : 9-split mode 
- 10~16 events : 16-split mode
•	 If the second event occurs within the set time of , the first event will last until the second 
one is terminated. (Page 51)
 
`Ex : If you set  to 5 seconds, and only one event occurs in CH 1.
 
`Ex : If you set  to 5 seconds, and the second event occurs in CH 2 within the set time after the first\
 
event occurred in CH 1.
 
M 
`Press the [ALARM] button to reset the alarm settings and to release the event mode.
 
`If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be 
performed.
 
J 
`In case of continuous events such as motion detection, switching to another split mode display may not immediate if 
concatenating events follow, even when you stopped alarm of the event.
Event occurrence4 seconds9 seconds
Stop alarm
CH1 CH2
CH3 CH4
CH1CH2
CH4CH2
CH3 CH1
CH1
CH3CH1
CH1CH2
CH1
CH1
CH1
CH1
CH1CH2
CH3 CH4
CH1CH2
CH4CH2
CH3 CH1
CH1
CH3CH1
CH1CH2
CH1
CH1
CH1
CH1
Event occurrence5 seconds
Stop alarm
CH1 CH2
CH3 CH4
CH1CH2
CH4CH2
CH3 CH1
CH1
CH3CH1
CH1CH2
CH1
CH1
CH1
CH1
 LIVE  
						

							32_ main menu
You can setup the system properties, devices, and options for recording, \
event, 
backup and network.
SYSTEM SETUP
You can setup Date/Time/Language, Permission, System Properties and Log.
Date/Time/Language
You can check and setup the current Date/Time and time related properties, as well as the language used for 
the interface on the screen.
Setting the Date/Time/Language
Set the Date/Time/Language
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
 
`If not logged in, it prompts with login window.
Refer to “Login”. (Page 21)
2.  Use the left/right buttons (_ +) to select the .
System property setup menu is selected.
3.  Use the up/down buttons (
▲▼) to select  and press the [ENTER] button.
4.  Select .
A dialog to setup Date, Time and Language.
5.  Use direction buttons (
▲▼_ +) to select an item to set 
and make your changes.
main menu
2013-01-01 01:10:25
System
Logout Return
Date/Time/Language
Permission Management
System Management
Log Information 
						

							English _33
! MAIN MENU
•	Date : Sets the date that will appear on the screen.
You can select the date format.
•	 Time : Sets the time and its format that will appear on the 
screen.
Select either one from .
•	 Time Zone : Sets the time zone of your area based on the 
Greenwich Mean Time (GMT).
 
`GMT (Greenwich Mean Time) is standard World Time and the basis 
of world time zone.
•	Time Sync. : You can set the DVR’s current time synchronized 
to a selected  regularly if you select to use .
 
In this case,  setup does not allow time adjustment.
 
- Time Server : Enter an IP or URL address of the time 
server.
 
- Last Sync Time : Displays the most recent synchronization 
time from the selected time server.
 
- Activate as Server : Set to  to allow the DVR to act 
as a Time Server for other DVRs.
•	 DST : Set up Daylight Saving Time with its period to make 
the time earlier than the GMT of its time zone by 1 hour 
during the set period.
•	 Language : Select your language. Sets the language for the 
interface.
English, French, German, Spanish, Italian, Chinese(Simplified), Russian, Korean, Polish, Japanese, Dutch, 
Portuguese, Turkish, Czech, Danish, Swedish, Thai, Romanian, Serbian, Croatian, Hungarian, Greek, Chinese 
(Traditional), Finnish and Norwegian are available.
6.  When the Date/Time/Language setup is done, press .
 
M 
`You can also use numeric buttons on the remote control to enter values for Date, Time and other numeric fields.
Date/Time/LanguageDate/Time/LanguageHoliday
  
Date  2013 -01-01  YYYY-MM-DD
  Time  08:14:24   
24 Hours
  Time Zone  GMT+08:00
  Time Sync. 
Setup  Not Used
  DST 
Dec First (Sun) 0H  Dec First (Sun) 0H
  
Language English
 OK  CancelTime Synchronization Setup
 OK  Cancel

 Synchronization    Use
  Time Server 
203.248.240.103
  Last Sync Time     
Fail
  Activate as Server    Use
Time Server
Date/Time/LanguageDate/Time/LanguageHoliday
 
Date  2013-01-01 YYYY-MM-DD
  Time  08:14:24   
24 Hours
  Time Zone  GMT
  Time Sync. 
Setup
  DST 
Dec First  (Sun) 0  Dec First  (Sun) 0
  
Language English
 OK  Cancel 
						

							34_ main menu
main menu
Setting Holiday
You can set specific dates to Holidays according to your preferences.
Holidays are applied to  and  too.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to select , and 
press the [ENTER] button.
2.  Select .
A calendar for Holiday setup appears.
3.  Use the left/right <
> buttons to select year or month, 
and press the [ENTER] button.
4.  Use direction buttons (
▲▼_ +) to select a desired date, 
and press the [ENTER] button.
You will see the “Setting Holiday” screen.
 
`Ex : Select January 9th and check on  only to make every 
January 9th a holiday. Check both on  and 
< Jan 2nd Wed> to make every January 9th and 2nd 
Wednesday of January holidays.
5.  When the Holiday setup is done, press . 
Using the Calendar
Using the mouse may help make setup easier.
 Select year and month.
Select the left/right <
> key on the left/right side of year/month and press [ENTER] button to 
adjust by 1 year/month.
 Use direction buttons to select a date and press [ENTER] button.
 
`A date with recorded data to be searched will appear in yellow in the System Log, Event Log, Time Search and 
Event Search.
 OK  Cancel
Date/Time/LanguageDate/Time/LanguageHoliday
  2013 Jan
  Sun Mon Tue  Wed Thu  Fri  Sat
     1  2 3  4 5
  6 7  8  9  10 11 12
  13 14  15  16 17  18 19
  20 21  22  23 24  25 26
  27 28  29  30 31
 OK  Cancel
Date/Time/LanguageDate/Time/LanguageHoliday
 2013 Jan
  Sun Mon Tue  Wed Thu  Fri  Sat
     1  2 3  4 5
  6 7  8  9  10 11 12 
  13 14  15  16 17  18 19 
  20 21  22  23 24  25 26 
  27 28  29  30 31Setting Holiday
 OK  Cancel1 / 9
Jan 2nd Wed 
						

							English _35
! MAIN MENU
Permission Management
You can set permissions of each user over the DVR's specific function and\
 settings.
Setting the Administrator
You can set and change Administrator’s ID and password.
The administrator can use and set all menu items and functions.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press 
[ ENTER] button.
2.  Select . 
A dialog for Admin ID and Password input appears.
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and set the ID and password.
 
M 
`The initial administrator ID is “admin” and the password 
should be set when logging in for the first time.
 
`Please change your password every three months to safely protect personal information and to prevent the damage 
of the information theft.         
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a 
password.
4.  When the administrator setup is done, press .
Using Virtual Keyboard
 For alphanumeric inputs, the virtual keyboard window 
appears.
 Use direction buttons (▲▼_ +) to move to a desired 
character, and press the [ENTER] button.
 In the upper text input box of the virtual keyboard, there  displays a list of candidate words containing the selected 
character.
 Select a word from the list, or use the keyboard to enter the whole word.
 OK  Cancel
  `  1 2 3 4 5 6  7  8  9  0  -  =    q w  e  r  t  y  u  i  o  p  [  ]    Del  a s  d  f  g h  j  k l ;  ‘   Caps Lock  z  x  c  v  b  n m  ,  . /     Shift
   Space  Ctrl
 
`If there are many of candidate words, use < ,  > buttons to move between them forward and backward.

 Select .  Entered word is applied.
 
`For upper case letters, use  button.
 
`For special characters, use  button.
 
`Using the virtual keyboard is the same to a normal keyboard use in your region.
 
`You can enter only lower-case alphabets and numeric values for the user ID.
 
`For the password, use alphabets and special characters excluding < 
\ 
> and .
 
`You can use number buttons on the remote control.
  ID 
admin
  New Password 
************
  Confi rm P/W 
************
Permission ManagementAdminGroup
 OK  Cancel
UserSetup 
						

							36_ main menu
main menu
Setting the Group
You can create user groups and setup permissions for those user groups.
You can register a user for each group in .
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press 
[ ENTER] button.
2.  Select .
A window for , , , and 
 setup appears.
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and set the value.
•	 Add, Delete, Rename : You can add, delete, rename a 
group or modify the permissions given to the group.
The virtual keyboard appears when  or  was selected.
You can add up to 10 groups.
 
- Add : When you first run the DVR with the admin account, only the admin accoun\
t exists. Add has already 
been deactivated. Select  to display the virtual keyboard. Enter a group name. You can add up to 
10 groups.
 
- Delete : Deletes a user group that is already registered. Selecting Delete will delete all user accounts 
belonging to that group.
 
- Rename : Renames a group that is already registered. Select  to display the virtual keyboard.
 
`For entering a group name, refer to “Using Virtual Keyboard”. (Page 35)
•	 Group Authority : Sets permissions to access menu items of each group.
Users of a group can access checked functions.
4.  When the group setup is done, press .
To set the group authority
You can set the permissions of the group users to access the menu according to the channel.
1. Select a menu to which the group permission is assigned.
The menu where the group permission is assigned will be 
displayed in the Live menu when a group user logs in.
•	 Live View : You can set the permission to access the Live 
screen according to the channel.
 
`SDR-4102 shows a list of 8 channels in Channel Setup window.
•	 Search : You can set the permission to access the Search 
menu according to the channel.
•	 Backup : You can set the permission to access the Backup 
menu according to the channel.
2.  Select .
Select and assign a group user so that the user can access the specified menu. 
Permission ManagementGroupAdmin
 OK  Cancel
User
 Add  Delete Rename

 Group 
 G
roup AuthorityLive View
Search
Backup
Setup
Setup
Setup
Setup
Permission ManagementGroupAdmin
 OK  Cancel
User
 Add  Delete  Rename
  Group  ABC 
 G
roup AuthorityLive View
Search
Backup
Setup
Setup
Setup
SetupChannel Setup
 OK  Cancel
 1 2 3  4
 5 6 7  8
 9  10  11  12
 13 14 15  16
All 
						

							English _37
! MAIN MENU
To restrict the user permissions
If the admin restricts all permissions of an added group, the users belonging to that group can access only 
the default minimum menus and can change the user’s own password only.
1. Start the DVR.
If all permissions are restricted, only the Login dialog 
should appear.
2.  Log in with a registered user ID.
3.  Right-click any area on the screen.
If all permissions are restricted, only the accessible context 
menus should appear.
To change the user password
If you log in with a user account that is restricted to access the menu, you can change your own password 
only.
1. Log in with your account.
2.  Select .
The Permission Management setup screen appears.
3.  Select .
The Password setup dialog appears.
4.  Enter a new password.
5.  Select .
You change to the password will be applied.
 ID 
abc
  New Password 
************
  Confi rm P/W 
************
Permission ManagementUser
 OK  Cancel
Login 
ID  abc
  Password
 OK  Cancel
2013-01-01 01:10:25
Scene Mode 
Audio Off
Freeze
Stop Alarm
Record
User Menu
Hide Launcher
Logout 
						

							38_ main menu
main menu
Setting the User
Users can be added only if a group was created in  menu.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press 
[ ENTER] button.
2.  Select .
A window for Add User appears.
3.  Use direction buttons (
▲▼_ +) to select  from the 
window.
A window for “Add User” appears.
You can configure the Network Viewer settings including 
name, ID, viewer, Select Group and password.
Result of the user setup appears in the  window.
To change the user property, use “Edit User”.
The “Edit User” window appears when you select a 
desired item to be changed in the  window.
•	 Viewer : If you select , you will be given access to the 
Web Viewer and Network Viewer.
 
`Refer to “Connecting Web Viewer”. (Page 82)
 
`For more information about use of SmartViewer , refer to the 
SmartViewer's user guide.
4.  When the user setup is done, press .
  Group  Name  ID Viewer  Del
Permission ManagementUserAdmin
 OK  Cancel
Setup
Add
Group
 Group  All Group
Previous/Next Page
 Group  Name  ID Viewer  Del
Permission ManagementUserAdmin
 OK  Cancel
Setup
Add
Group
 Group  All Group
Previous/Next PageAdd User
 OK  Cancel

 Name 
  ID 
  Viewer 
Not Used
  Select Group  ABC
  Password 
  Confi rm P/W  
						

							English _39
! MAIN MENU
Setting Permissions
You can set restricted access for all general users.
Items with restrictions will require logging in for use.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
▲▼) in  window to 
move to , and press 
[ ENTER] button.
2.  Select .
The Restricted Access, Restriction on Network Access, 
Auto Log out, Manual Input of ID setup screen appear.
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and set the value.
•	 Restricted Access : All menu items allowed for a user can 
be set with restricted access.
 
- Checked (
) : Restricted
 
- Not checked (
) : Accessible
 
`If it is not checked () in , any user can access the item no matter what the  
setting.
 
`If it is checked () in , a user can access the item only if the user has permission in  setting.
•	 Restriction on Network Access : Restricts remote access from a  network.
 
- All Network : Restricts all access instances via Network Viewer and Web Viewer.
 
- Web Viewer : Restricts access via the Web Viewer.
•	 Auto Log out : A user will be automatically logged out if there is no operation on DVR for over set period of 
time.
•	 Manual Input of ID : Prompts you to enter the user ID 
manually for the login process.
 
- Checked (
) : Encloses the registered user IDs with the 
[  ] symbols.
Use the virtual keyboard to enter the user ID.
4.  When the permission setup is done, press .
Permission ManagementSetupAdmin
 OK  Cancel
Group  Restricted AccessLive View  Search 
Backup All
  Auto Log out 
OFF
  Manual Input of ID  ON  OFF
User
 Restriction on Network AccessAll Network 
Web Viewer
Login 
ID 
*****
  Password
 OK  Cancel 
						

							40_ main menu
main menu
System Management
You can check the system version, update to a newer version, as well as d\
ata backup and initialization.
Checking the System Information
You can check the current system version, broadcasting system, MAC address. You can update the system.
           Using the mouse may help make setup easier.
1. Use the up/down buttons (
▲▼) in  window to 
move to , and press [ENTER] 
button.
2.  Check the Software Version, Broadcast Format, and MAC 
Address.
•	 System Information : Shows the current system’s 
information.
The values can not be changed by a user.
•	 S/W Upgrade : Updates the DVR’s software up to date.
•	 DVR Name : Assigned name will be displayed in Network 
Viewer, when connected to the DVR.
•	 Updating the Software
1.  Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)
 
`Upgradeable devices include USB memory and network device.
 
`To update the network, the current DVR should have been 
connected to the network.
Upgrade via the proxy server may not be enabled due to the 
restricted access.
2.  Select  from  window.
3.  Select .
4.  When the recognized device appears, select .
 
`The  button will be activated only if the current  of the  is 
same to or older than that of .
5.  Press  in the “System Upgrade” window.
 
`While updating, it shows the progress.
  Software Version  v1.0xh_yymmddhhmmss
  Broadcast Format 
NTSC
   MAC Address 
00:00:F0:54:FF:FF
System ManagementSystem InformationSettings
Previous
 System Information
Search
OK

 Device 
Network
  Version 
No S/W Data
  DVR Name 
DVR S/W Upgrade
 Software Version  v1.0xh_yymmddhhmmss
  Broadcast Format 
NTSC
   MAC Address 
00:00:F0:54:FF:FF
System ManagementSystem InformationSettings
Previous
 System Information
Search
OK

 Device 
Network
  Version 
No S/W Data
  DVR Name 
DVR S/W Upgrade
System Upgrade
 OK  Cancel
Current Version  v1.0xh_yymmddhhmmss
New Version  v1.0xh_yymmddhhmmss
Do you want to upgrade?
 Software Version  V1.0xh_yymmddhhmmss
  Broadcast Format 
NTSC
   MAC Address 
00:00:F0:54:FF:FF
System ManagementSystem InformationSettings
Previous
 
 S
ystem Information
Upgrade
  Device 
USB2FlashStorage
  Version 
V1.0xh_yymmddhhmmss 
 S
/W Upgrade
S/W Upgrade
Software upgrading...