Samsung Sdr3102 N Manual

English _121
•	Sdr-4102
unit : mm (inches)
235 (9.25’’)
224 (8.82’’)
57(2.24’’)
52(2.05’’)
315 (12.4’’)
 
 APPENDIX  

122_ appendix
•	Sdr-3102
unit : mm (inches)
235 (9.25’’)
224 (8.82’’)
57(2.24’’)
52(2.05’’)
315 (12.4’’)
appendix  

English _123
deFAuLt SettIng
This returns the factory default settings.
The settings are made as follows;
•	Use System/Load Factory Default in MENU
 
`The default settings are based on SDR-5102.
 
`The initial administrator ID is “admin” and the password should be set when logging in for the first time. Please change your 
password every three months to safely protect personal information and to prevent the damage of the information theft.  
Please, take note that it’s a user’s responsibility for the...

124_ appendix
CategoryDetailsFactory Default
Device Remote Device
Baudrate
9600
Parity None
Data 8
Stop bit 1
Remote Control ON(0)
Monitor Monitor Event Display
OFF
Display All
Multi CH SEQ Time 5 sec
VGA/HDMI 1280X1024
HDMI Resolution Auto DetectionON
Mode Live Screen
ALL
Play Screen ALL
Recording Recording Schedule
CH1~CH16 Both(Cont&Evnt)
Event Record Duration PRE Event
OFF
POST Event 1 min
REC Quality/Resolution Normal Recording
Resolution
CIF
Frame Rate NTSC: 7fps
PAL: 5fps
Record Quality Level 4...

English _125
CategoryDetailsFactory Default
Network Connection Mode
InterfaceIP Type
Static
Transfer Bandwidth 2Mbps
IP Address 192.168.1.200
Gateway 192.168.1.1
Subnet Mask 255.255.255.0
DNS 168.126.63.1
Port Protocol Type
TCP
Device Port 4520~4524
HTTP Port 80
Secure Video Transmission OFF
DDNS DDNS Site OFF
Live Transfer Resolution
CIF
Quality Low
Mailing Service SMTP
Server
OFF
Port 25
Use Authentication OFF
Secure Transfer Never
Event Event Interval
10 min
Use Event Transfer OFF
Group Group
OFF...

126_ appendix
troubLeShootIng
SymptomCountermeasures
The system does not turn on and the indicator on the 
front panel does not work at all.  
y Check if the power supply system is properly connected.
 
y Check the system for the input voltage from the power source.
 
y If the problem persists even after you have taken the above actions, 
check the power supplier and replace it with a new one if neccessary.
Some channels display just a black screen even if 
they receive video sources.  
y Check if the...

English _127
SymptomCountermeasures
A message of “Need to reset date/time.” Is displayed 
on the screen.  
y This message is displayed if there occurs a problem with the time 
setting of the internal clock or an error in the clock itself.   
Contact the retailer or the service center for more information.
The time bar is not displayed in Search mode.  
y The timeline can switch between normal and extension mode.   
In extension mode, the time bar may not be displayed in the current 
timeline. Switch to...

128_ appendix
SymptomCountermeasures
Recording does not work.  
y If your player does not display a Live image at all, that indicates 
recording does not work so first check if you see an image on the 
screen.
 
y Recording does not work if the recording settings are not properly 
configured.
1)  Manual Record: Press the [REC] button on the remote control to start 
recording.
2)  Scheduled Record: Specify a desired time in Menu – Record – 
Recording Schedule. Recording will start at the specified time....

gnu generAL PubLIc LIcenSe
Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this 
license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom 
to share and change it. By contrast, the GNU General Public License is 
intended to guarantee your freedom to share and change free software 
to...

c)  
Accompany it with the information you received as to the offer to 
distribute corresponding source code. (This alternative is allowed 
only for noncommercial distribution and only if you received the 
program in object code or executable form with such an offer, in 
accord with Subsection b above.) 
The source code for a work means the preferred form of the work for 
making modifications to it. For an executable work, complete source 
code means all the source code for all modules it contains, plus...