Samsung Sdr3102 N Manual

English _101
record
For more information, refer to . (Page 53)
recording Schedule
If you set a recording schedule for a specific date and time, the 
recording will start at that specific time. 
- Apply to All CH : Click  to display the 
confirmation window.
event record duration
You can set the start and end times of recording that will be activated 
if an event occurs.
 
 WEB VIEWER  

102_ web viewer
rec Quality & resolution
•	Standard/event
You can set the resolution, frame rate and recording quality for each 
channel.
record option
You can set the Disk End Mode.
event
For more information, refer to . (Page 56)
Motion detection
You can set the motion detection mode and the sensitivity  
as well as the alarm output type and the duration.
web viewer  

English _103
•	Motion region
Set the target motion detection area.
Video Loss detection
You can set the alarm output time if a video loss occurs.
t ampering detection
You can set whether to generate alarm and its dwell time for video 
tampering events.
 
 WEB VIEWER  

104_ web viewer
Alarm Schedule
You can schedule the alarm output according to the day of the week 
and the time.
 
The default setting is Event Sync, which activates the alarm only if an 
event occurs.
network
For more information, refer to . (Page 60)
connection Mode
A remote user can access the DVR via the network to check the current mode and the IP address.
•	Interface
You can set the network connection route.
•	 Port
You can configure the protocol related settings.
web viewer  

English _105
DDNS
You can check the DDNS settings.
Live Transfer
Sets the quality of the image that is transferred from the DVR to the network.
•	Live Transfer
A remote user can set the image resolution of the transferred data.
Mailing Service
You can specify the SMTP server that sends a mail if an event occurs and \
set the recipient group and users.
•	 SMTP
You can set the server that sends mails and specify if you use the 
authentication process.
•	 Event
You can set the event interval and specify...

106_ web viewer
•	group
You can add a group to receive the mail if an event occurs and set the 
permission to receive the event mail for each group.
•	 recipient
You can add a user or users who will receive the mail.
About
Click .
Displays the model name of connected DVR and the version of Web Viewer.
web viewer  

English _107
connectIng Web VIeWer (Mac)
Safari on MAc.
If you want to use DVR Web Viewer with Safari Browser on a Mac, please refer to this user guide and install 
Multi Viewer with firmware upgrade if necessary.
•	Mac OS versions available : 10.6 or later version
•	 Silverlight : 5 or later
•	 Safari : 5 or later
1.  Click [click now to Install] to display the installation 
screen as shown.
2.  Double-click the [Silverlight.pkg] icon to display the 
Silverlight plug-in installation screen as shown.
3....

108_ web viewer
web viewer
~ If Microsoft Silverlight plug-in is already installed
1.  Use a web browser to connect to the DVR.
2.  If Silverlight plug-in is already installed, you will see the 
login screen as shown.
3.  If the login screen does not appear, check if the DVR set is 
connected properly with a valid IP address.
 M 
If automatic proxy is activated and an invalid DNS server is specified while configuring network, the Internet access 
may not be available.
 
For more details on using the Web...

English _109
uSIng LIVe VIeWer (Mac)
The Live Viewer screen consists of following :
MenuFunctions
aName, AddressDisplays a connected DVR’s IP address and model name.
bMenu SelectionConsists of  , and  menu.
cSplit Mode SelectionThese buttons are used for the screen split and full screen mode. 
`Supports up to a maximum of 9 channels due to performance constraints of Silverlight.
dName, AddressDisplays a connected DVR’s IP address and model name.
eAudioSets the sound connected to each channel to ON/OFF....

110_ web viewer
MobILe VIeWer
What is Mobile Viewer?
Mobile Viewer is management software that enables you to connect 
to DVR (Digital Video Recorder) remotely and control the video 
playback and PTZ operations (if configured) in real time.
Key Features
•	Remote access via Smart phone
•	 Voice Recognition
•	 1-split and 4-split modes supported in Live Viewer
•	 Supports single channel search function
•	 Switch channels using the touch-sensitive LCD panel
•	 PTZ camera operations supported
 
(complies...