Samsung Sde 5001 N Manual

							English _41
 USING THE DVR
Event Log
Event log shows recorded events on alarms, motion detections and video loss.
It also shows the log and its timestamp.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Select .
3. Use direction buttons (
	
◄ ►) to move to the desired 
item.
4. Set Search Day, Channel and Type and the press 
.
  Using the CalendarŽ. (Page 33)
Click on the calendar <
> to display the calendar window.
Backup Log
You can find out who backed up and the details (backup time, channel, device to use, file format, etc.).
Using the mouse may help make setup easier.
1. In the  window, press the up/down (	
) button 
to move to  and press the [ENTER] 
button.
2. Select .
3. Use the four direction buttons (
	
◄ ►) to move to a 
desired item.
4. Specify a search term and select  in the right 
corner.
Backup details for the search term will be listed.
 No.  Log List  Date/Time   7  Motion Detection [CH 7]  2011-01-01 00:02:18
  6  Motion Detection [CH 6]  2011-01-01 00:02:18
  5  Motion Detection [CH 5]  2011-01-01 00:02:18
  4  Motion Detection [CH 4]  2011-01-01 00:02:18
  3  Motion Detection [CH 3]  2011-01-01 00:02:18
  2  Motion Detection [CH 2]  2011-01-01 00:02:18
  1  Motion Detection [CH 1]  2011-01-01 00:02:18
Log InformationEvent LogSystem Log
First PageSearch Day  2011-01-01
Previous
Previous/Next Page   CH  All CHs  Type  View all
Search
Last PageBackup Log
 No.  User  Date/Time 
Log InformationBackup LogSystem Log
First PageSearch Day  2011-01-01  ~  2011-01-02
Previous
Previous/Next PageSearch
Last PageEvent Log 
						

							42_ using the DVR
using the DVR
SETTING THE DEVICE
You can configure the settings of: Camera, Storage Device, Remote Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front 
panel.
2. Use the left/right button (
◄ ►) to select .
Device setting menu is selected.
3. Use the up/down buttons (
	
) to move to , 
and press [ENTER] button.
4. Select .
You will see a window where you can configure the 
camera settings including Video, Audio, Channel Name, 
Dwell Time and Progressive.
5. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Video
-  : You can turn ON/OFF the selected 

-  : Shows information other than the video of the selected channel.
  For privacy protection, it does not display the video while the recording continues.
-  : Shows nothing but an empty screen while the recording continues.
• Audio
-  If set to , you can turn the audio of the channel ON on the Live screen.
-  If set to 
						

							English _43
 USING THE DVR
• Screen Setup : The video appeared on the screen may vary 

display to your preferences.
Select a channel and adjust the 
, 
, and  of the selected channel.
• Press the  to initialize settings back to the default 50.
6. When the camera setup is done, press . 
Storage Device
You can check information on storage devices.
Confirming Devices
You can check storage devices and their free space, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD, CD/DVD).
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Select .
• No. : Shows the assigned number of the internal HDD.
• Used/Total : Shows the used/total capacity of the storage 
device.
• 
- USB memory is used only for backups.
  External USB HDD is used for extension and backup purposes.
• Status/Management : Shows the current status of the HDD, 
as in Normal/Check/Replace.
- Normal : Available to use
- Check : Available to use but recommended to replace
- Replace : Requires immediate replacement.
3. To move to the previous menu, press . 
Screen SetupInit Apply to All CHCH1 50 50 50 OK  Cancel
Storage DeviceDeviceFormat
 OK Cancel
HDD Alarm
 Device  No.  Used/Total  Usage  Status/Management HDD  1  3.95G/0.99T Internal Normal 
						

							44_ using the DVR
using the DVR
Formatting
You can format a storage device.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Select .
A window for selection of device for formatting appears.
3. Use direction buttons (
	
◄ ►) to select a device to be 
formatted.
4. Select  on the bottom of the screen.
Press 
						

							English _45
 USING THE DVR
• Duration : Sets the alarm duration for the alarm signal and beep sound.
  M   status means that the HDD is operating but it has problems that require technical examination.
(
) appears on the Live screen.
   status means that the HDD has defect and requires immediate replacement.
(
) appears on the Live screen.
4. When the HDD Alarm setup is done, press .
Remote Devices
You can set the Remote Control ID with the DVR.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Use direction buttons (
	
◄ ►) to move to the desired 
item, and press [ENTER] button.
3. Make sure to match IDs of the DVR and Remote Control, 
and press .
  M  Changing the
Remote Control IDŽ. (Page 
11) 
Monitor
You can configure information to be displayed.
Setting the Monitor
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Select .
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Event Display : Sets the dwell time of the event channel 
display on the monitor when an event occurs.
If selected , it displays the channel until you 
press [ALARM] button to release it.
• Display : Displays only checked items on the monitor 
screen.
• Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of 
the Live screen.
• VGA : Select the output resolution.
• Sharpness : You can adjust the sharpness of the video output signal.
4. When the monitor setup is done, press . 
Remote Control  ON  ID  00
Remote Device
 OK  Cancel
MonitorMonitorMode
 Event Display  OFF
 Display  Date  Time  CH Name  Icon
 
Multi CH SEQ Time 5 sec
 VGA  800x600
 
Sharpness Level1 (Low)
 OK  Cancel Display Position Setup 
						

							46_ using the DVR
using the DVR
Scr
Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, 
depending on the condition. Then, you can change the display position of the data.
1. In the  window, press the up/down (
	
) button to move to  and press the [ENTER] 
button.
2. Select the  item.
3. Select  in the bottom.
You will move to the  window.
4. Use the four direction buttons or the number buttons on 
the front panel or the remote control to adjust the data 
position. 
Setting the Scr
You can configure the Live screen and Split Screens.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Select .
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Live Screen : Select split modes for the Live screen.
16-, 9-, and 4-split screens are included by default.
SDE-4001 doesnt support 16-split screen mode.
• Play Screen : Select split modes for the playback screen.
Only the 13-split screen is optional.
Black shows the playback while white shows the Live screen.
4. When the screen mode setup is done, press . 
Display Position Setup
 OK  Cancel
30 3030
30
MonitorModeMonitor
 OK  Cancel
Live Play
Live Screen
Play Screen 
						

							English _47
 USING THE DVR
SETTING THE RECORDING
You can setup scheduled recording, event recording and other recording related settings.
Recor
Make your reservation on a date and time to schedule the recording on specified time.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front 
panel.
2. Use the left/right button (
◄ ►) to select .
Record menu is selected.
3. Use the up/down buttons (
	
) to move to , and press [ENTER] button.
4. Select .
A window of scheduled recording setup appears.
5. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Apply to All CH : If selected 
						

							48_ using the DVR
using the DVR
Recording Color Tags
Color Function Description
White No Recording No schedule / event recording
Orange Continuous Scheduled recording only
Blue Event Event recording only
Green Both(Cont&Evnt) Both scheduled / event recordings
Each press of a selected cell will cycle through ---
.
Event Record Duration
You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] 
button.
2. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Pre Event : The recording of an event will start at a 
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5 
seconds before the event.
• POST Event : The recording will continue for a 
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
3. When the event recording duration setup is done, press . 
Event Record Duration
 OK  Cancel
Previous/Next Page  CH  Pre Event 
 POST Event 

 1  OFF 
 1 min 

 2  OFF 
 1 min 

 3  OFF 
 1 min 

 4  OFF 
 1 min 

 5  OFF 
 1 min 

 6  OFF 
 1 min 

 7  OFF 
 1 min 

 8  OFF 
 1 min 
 
						

							English _49
 USING THE DVR
REC Quality / Resolution
You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.
Setting Standard Recording Properties

Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press 
[ENTER] button.
2. Select .
3. When the recording setup is done, press .
• Remaining count : If you change the settings of the 
resolution and the remaining rate, the frame rate available for 
each resolution will be recalculated.
  The remaining frame rate for each channel is a sum of values from 
both standard recording and event recording.
If the remaining rate is zero or no other page has a remaining rate available, you cannot increase the value of the 
remaining rate.
If this is the case, reduce the recording count of the current page, or do so for the same channel on any other page.
Setting Event Recording Properties

Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press 
[ENTER] button.
2. Select .
Event recording setup window appears.
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and select it.
• Resolution : Sets the resolution of the recorded screen.
• Record Rate : Image Per Second, means the frames 
recorded per a second.
• Record Quality : Sets the recording quality.
  M  Only if the resolution is set to 4CIF, you can select Level 9 for the recording quality.
However, Level 9 is available only if you select a level for each and every channel. 
If the resolution is set to 1CIF or 2CIF, the possible resolution is up to Level 8.
  The estimated total remaining count means the total number of remaining recordings for both standard and event 
recordings.
  You cannot increase the remaining count if the current remaining count has reached zero or there is no available 
remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so 
for the same channel on any other page.
4. When the Event recording setup is done, press . 
 CH  Resolution 
 Record Rate 
 Record Quality 
 1  CIF(S) 
 7.5ips 
 Level4 

 2  CIF(S) 
 7.5ips 
 Level4 

 3  CIF(S) 
 7.5ips 
 Level4 

 4  CIF(S) 
 7.5ips 
 Level4 

 5  CIF(S) 
 7.5ips 
 Level4 

 6  CIF(S) 
 7.5ips 
 Level4 

 7  CIF(S) 
 7.5ips 
 Level4 

 8  CIF(S) 
 7.5ips 
 Level4 

REC Quality & ResolutionStandardEvent
Previous/Next Page
 OK  Cancel
Remaining count : 4CIF(L) : 0 2CIF(M) : 0 CIF(S) : 0
 CH  Resolution 
 Record Rate 
 Record Quality 
 1  4CIF(L) 
 7.5ips 
 Level4 

 2  4CIF(L) 
 7.5ips 
 Level4 

 3  4CIF(L) 
 7.5ips 
 Level4 

 4  4CIF(L) 
 7.5ips 
 Level4 

 5  4CIF(L) 
 7.5ips 
 Level4 

 6  4CIF(L) 
 7.5ips 
 Level4 

 7  4CIF(L) 
 7.5ips 
 Level4 

 8  4CIF(L) 
 7.5ips 
 Level4 

REC Quality & ResolutionStandardEvent
Previous/Next Page
 OK  Cancel
Remaining count : 4CIF(L) : 0 2CIF(M) : 0 CIF(S) : 0 
						

							50_ using the DVR
using the DVR
Recor
You can set the recording to stop or overwrite when the HDD is full.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Disk End Mode : If selected , recording will 
continue despite the HDD full while overwriting the oldest.
If selected , the recording will stop when the HDD is 
full.
• Disk End Beep : If selected , the button is activated.
If you check it, the beep will sound on the disk full and the 
recording stops.
• Auto Delete : If you check it, Record Period setup is activated.
If you specify the auto deletion period, the recording data before the period will be deleted automatically.

3. When the recording option setup is done, press . 
Record Option
 OK  Cancel
 Disk End Mode  Overwrite
  Disk End Beep
   Auto Delete 
180 day Auto Delete
 OK  Cancel
 The recording information will be deleted.
Do you want to proceed?