Samsung Sde 5001 N Manual
Have a look at the manual Samsung Sde 5001 N Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English _91 APPENDIX PRODUCT SPECIFICACAMERA\) ItemDetails SEB-1005R N Electrical Input Power Consumption 2.6W Video Imaging Device T Scanning System Synchronization FrequencyH: 15,625 HzH:15,625 Hz V Horizontal Resolution Min. OLux \(IR-LED\) S/N Ratio \(Y Signal\) UTPBuilt-in UTP Maximum Balanced Differential Impedance: Lens Focus Length 3.8mm Max.Aperture Ratio222 Angular Field of H:54 V:40 Oper Shutter Mode Gain Control White BalanceAuto \(3200
92_ appendix appendix ItemDetails SEB-1005R N Environmental Operating T Humidity 0
English _93 APPENDIX PRODUCT SPECIFICASDE-4001\) Item VideoInputs Resolution 704x480 NTSC, LiveFrame rate 30ips NTSC, Resolution704x480 NTSC, Multi Screen display Perfor Operating System RecordingCompression Record Rate NTSC: NTSC: NTSC: ModeNTSC: P Overwrite modes Pre-eventOff/5/10/20/30sec Post-event - Off/5/10/20/30sec - 1/3/5/10/20min, Search & PlaybackSearch modeDate/time,Backup, All contains the Preview function\) Playback function NetworkT Up to 8Mbps,\(8Mbps\)/2/1.5/1 Mbps/800/600/500/400/300/200/ 100/50 kbps StreamCIF\) Maximum No. usersSearch\(3\) / Live Unicast\(10\) / Live Multicast\(20\) Protocol support LIGHTTPD & UDP, Monitoring , StorageInternal HDD 1TB SA External HDD
94_ appendix appendix Item Interface MonitorsVGA HDMI
English _95 APPENDIX PRODUCT SPECIFICASDE-5001\) Item VideoInputs Resolution 704x480 NTSC, LiveFrame rate 30ips NTSC, Resolution704x480 NTSC, Multi Screen display Perfor Operating System RecordingCompression Record Rate NTSC: NTSC: NTSC: ModeNTSC: P Overwrite modes Pre-eventOff/5/10/20/30sec Post-event - Off/5/10/20/30sec - 1/3/5/10/20min, Search & PlaybackSearch modeBackup, Playback function NetworkT Up to 8Mbps,\(8Mbps\)/2/1.5/1 Mbps/800/600/500/400/300/200/ 100/50 kbps StreamCIF\) Maximum No. usersSearch\(3\) / Live Unicast\(10\) / Live Multicast\(20\) Protocol support LIGHTTPD & UDP, Monitoring , StorageInternal HDD 1TB SA External HDD
96_ appendix appendix Item Interface MonitorsVGA HDMI
English _97 APPENDIX DEF This r The settings ar • Use System/Load Factory Default in MENU The default settings are based on SDE-5001. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user CategorDetails System SettingsDate/TDate T T T DST Language Permission ManagementAdminID New Password SettingRestricted Access Backup Auto LogoutOFF System ManagementNTSC/P DeviceCameraCameraVideo Audio CH Name SEQ-Dwell T Screen SetupBrightness Contrast Color Storage DeviceCheck Duration Replace Duration Remote Device
98_ appendix appendix CategorDetails DeviceMonitorDisplay Multi CH SEQ 5 sec VGA Sharpness 2\(Low\) Display Position Setup ModeLive Mode Play Mode Recording Recording Schedule Event Record DurationPRE Event POST Event REC Quality/ Resolution Standard Resolution Frame Rate NTSC: P Record Quality EventResolution Frame Rate NTSC: P Record Quality Record OptionDisk End ModeSetup Disk End Beep Auto Delete EventSensor DetectionSensor Operation Camera Alarm Alarm Duration Motion DetectionMode Sensitivity Level 10 High Alarm None Alarm Duration Motion Region
English _99 APPENDIX CategorDetails EventVideo Loss DetectionVideo Loss State Alarm Alarm Duration10 sec Alarm Schedule Alarm1 NetworkConnection ModeConnectionConnection Mode Bandwidth IP Gateway Subnet Mask DNS ProtocolProtocol T Port \(TCP\) 558 W DDNS Live TResolution Quality Mailing SerSMTPSer Port Use Authentication Secure T EventEvent Inter Use Event GroupGroup Recipient Permission Recipient
100_ appendix appendix TROUBLESHOOTING Symptom The system does not turn on and the indicator on the front panel does not work at all. Check if the power supply system is properly connected. Check the system for the input voltage from the power source. If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if neccessar Some channels display just a black screen even if they receive video sources. Check if the camera connected to the system properly displays the image. properly connected to the video source. Check if the camera is properly supplied with power Sometimes, signal from a video distributor that is connected to multiple systems. this case, This may find the cause and solve the problem. If I press the [REC] button on the front panel , nor the player start recording. Check if there is a free space on the HDD for the recording. Check if the record mode is set to ON in the record mode setting. The screen displays the logo image repeatedlyThis may occur from a problem with the main board, software is corrupt. Contact the nearest ser The Channel button does not work on the Live screen. The Channel button does not work if the current screen is in the event monitoring mode. In the event monitoring screen,ALARM] button to exit the screen and select a channel. The cursor will not move to the Start button when I start the calendar search. Check if the channel and the date that you want to play are marked with the Both channel and date should be checked before you can start playing with the Start button. When the alarm sounds,ALARM] button on the front panel to release the alarm but it does not work. in any way Press the [MENU] button on the front panel to release the alarm in the following way: 1\) duration of the event monitoring to Off. 2\) Detection/Video Loss\)