Samsung SCX 4601 User Manual

Faxing_ 71
Sending a fax 
1.Press (Fax) on the control panel.
2. Lo
ad originals face up into the document feeder, or place a single 
original face down on the scanner glass.
(See  On the scanner glass on page  45  or In the document feeder on 
page  46 ).
3. Adj
ust the resolution and the darkness to suit your fax needs (See 
Adjusting the document settings on page  74 ).
4. Ente
r the receiving fax machine’s number.
You can use speed dial numbers, or group dial numbers. For details 
ab
out storing and...

Faxing_ 72
page 75 .
8. The
 display asks you to enter another fax number to send the document.
9.To 
enter more fax numbers, press  OK when  Yes appears and repeat 
steps 7. You can add up to 10 destinations.
 Once you entered a group dial number, you cannot enter another 
group dial numbers anymore.
10. Whe
n you have finished entering fax numbers, press the left/right arrow 
to select  No at the Another No.?  prompt and press OK.
11. Ente
r the job name you want and press OK.
For details on how to...

Faxing_ 73
all of the received faxes are stored in memory. For further 
details, see  Receiving in secure receiving mode on page  73 .
Receiving manually in Tel mode
You can receive a fax call by pressing  On Hook Dial and then pressing 
Start when you hear a fax tone from the remote machine. The machine 
begins receiving a fax. If your machine has a handset, you can answer calls 
using the handset.
To change the number of rings, see  Changing the fax setup options on 
page  77 .
Receiving automatically...

Faxing_ 74
3.Enter the four-digit password and press  OK.
The machine prints all of the faxes stored in memory.
Deactivating secure receiving mode
1. Access the  Secure Receive  menu by following steps 1 through 4 in 
“Activating secure receiving mode.”
2. Pres
s the left/right arrow until  Off appears and press  OK.
3. Enter the four-digit password and press  OK.
The mode is deactivated and the machine prints all faxes stored in 
me
 mory.
4. Pres
s  Stop/Clear  to return to ready mode.
Receiving faxes...

Faxing_ 75
9.Press  Stop/Clear  to return to ready mode.
Subsequent sent faxes will be forwarded to the specified fax machine.
Forwarding a received fax to another destination
With this feature, you can forward every fax you received to another 
destination. When the machine receives a fax, a fax is stored in the memory 
then, the machine sends it to the destination you have set.
1. Pres
s (Fax) on the control panel.
2. Pres
s  Menu on the control panel.
3. Pres
s the left/right arrow until  Fax Feature...

Faxing_ 76
7.Enter the first few letters of the speed dial’s name you want to add or 
delete.
8. Press the left/right arrow until the name and number you want 
appears and press  OK.
If you entered a new speed dial number,  Add? appears.
If you enter a speed dial number stored in the group,  De
 lete? 
appears.
9. Pres
s  OK to add or delete the number.
10. Press  OK when  Yes appears to add or delete more numbers and 
repeat steps 7 and 8.
11. When you have finished, press the left/right arrow to select...

Machine status and advanced feature_ 77
11 .machine status and advanced feature
This chapter explains how to browse the current status of your machine, and the method of setting for the advanced 
machine setup. Read this chapter carefully in order to use your machines diverse features.
This chapter includes:
•Fax setup
•Copy setup
•Printing a report
•Clearing memory
•Network
•Menu overview  
 Some menus may not appear in the display depending on options or 
models. If so, it is not applicable to your...

Machine status and advanced feature_ 78
Change Default
•Standard : Originals with normal sized 
characters.
• Fine : O
riginals containing small characters 
or thin lines or originals printed using a 
dot-matrix printer.
• Supe
r Fine : Originals containing extremely 
fine detail.  Super Fine  mode is enabled only 
if the machine with which you are 
communicating also supports the  Super 
Fine  resolution.
 • For memory transmission,  Super 
Fine  mode is not available. The 
resolution setting is...

Machine status and advanced feature_ 79
7.Repeat steps 4 through 6, as needed.
8.Press Stop/Clear to return to ready mode.
Change Default
PRINTING A REPORT
You can print a report on the machines configuration or font list, etc.
1.Press Menu on the control panel.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press the left/right arrow until Report appears and press OK.
4.Press the left/right arrow until the report or list you want to print appears 
and press OK.
To print all...

Machine status and advanced feature_ 80
NETWORK
You may set up the network with the machines display screen. Before doing 
that, you must have the relevant information concerning the type of network 
protocols and computer system you use. If you are not sure which setting to 
use, contact your network administrator to configure this machine to the 
network.
1.Pres
s  Menu on the control panel.
2. Pres
s the left/right arrow until  Network appears and press  OK.
3. Pres
s the left/right arrow until the...