Samsung SCX 4500W User Manual

Using Your Printer in Linux
33
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to 
print from using Common UNIX Printing System (CUPS). You 
can print on your machine from any such application.
1From the application you are using, select Print from the 
File menu.
2Select Print directly using lpr.
3In the LPR GUI window, select the model name of your 
machine from the Printer list and click 
Properties.
•
Reverse All Pages(3,2,1): When you use...

Using Your Printer in Linux
34
Scanning a Document
You can scan a document using the Unified Driver Configurator 
window.
1Double-click the Unified Driver Configurator on your 
desktop.
2Click the   button to switch to Scanners Configuration.
3Select the scanner on the list. 
When you have only one MFP device and it is connected 
to the computer and turned on, your scanner appears on 
the list and is automatically selected.
If you have two or more scanners attached to your 
computer, you can select any...

Using Your Printer in Linux
35
10When you are finished, click Save on the toolbar.
11Select the file directory where you want to save the image 
and enter the file name. 
12Click Save.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later 
scanning.
To save a new Job Type setting:
1Change the options from the Scanner Properties window.
2Click Save As.
3Enter the name for your setting.
4Click OK. 
Your setting is added to the Saved Settings drop-down 
list.
To save a Job...

Using Your Printer with a Macintosh
36
8Using Your Printer with 
a Macintosh
Your printer supports Macintosh systems with a built-in USB 
interface or 10/100 Base-TX network interface card. When you 
print a file from a Macintosh computer, you can use the CUPS driver 
by installing the PPD file. 
NOTE: Some printers do not support a network 
interface. Make sure that your printer supports a 
network interface by referring to Printer Specifications 
in your Printer User’s Guide.
This chapter includes:
•...

Using Your Printer with a Macintosh
37
Using SetIP program
This program is for the network IP setting using the MAC 
address which is the hardware serial number of the network 
printer card or interface. Especially, it is for the network 
administrator to set several network IPs at the same time. 
You can only use SetIP program when your machine is 
connected to a network.
SetIP program should be automatically installed during the 
printer driver installation.
NOTE: If you select Typical installation for...

Using Your Printer with a Macintosh
38
For a USB-connected
1Follow the instructions on “Installing Software” on page 36 
to install the PPD and Filter files on your computer.
2Open the Applications folder → Utilities, and Print 
Setup Utility
.
• For MAC OS 10.5~10.6, open 
System Preferences from 
the 
Applications folder, and click Print & Fax.
3Click Add on the Printer List.
• For MAC OS 10.5~10.6, press the “
+” icon then a display 
window will pop up. 
4For MAC OS 10.3, select the USB tab. 
• For...

39
Printing 
NOTES: 
• The Macintosh printer’s properties window that appears in 
this User’s Guide may differ depending on the printer in use. 
However the composition of the printer properties window is 
similar.
• You can check your printer name in the supplied CD-ROM.
Printing a Document
When you print with a Macintosh, you need to check the printer 
software setting in each application you use. Follow these steps 
to print from a Macintosh.
1Open a Macintosh application and select the file you want...

40
Paper
Set Paper Type to correspond to the paper loaded in the tray 
from which you want to print. This will let you get the best 
quality printout. If you load a different type of print material, 
select the corresponding paper type.
Printing Multiple Pages on One Sheet 
of Paper
You can print more than one page on a single sheet of paper. 
This feature provides a cost-effective way to print draft pages.
1From your Macintosh application, select Print from the 
File menu. 
2Select Layout.
3Select the...

41
Scanning with network
1Make sure that your machine and computer are turned on.
2Place a single document face down on the document glass. 
OR load the document(s) face up into the ADF (or DADF).
3Start Applications and click Image Capture.
4Click Devices and click Browse Devices.
5For MAC OS X 10.4: 
Select your machine in 
Twain devices option. Make sure 
that 
Use TWAIN software checkbox is checked, and click 
Connect.
For MAC OS X 10.5~10.6:
Make sure that 
Connected checkbox is checked beside 
your...

42
SOFTWARE SECTION 
INDEX
A
advanced printing, use 18
C
canceling
scan
 25
D
document, print
Macintosh
 39
Windows 12
E
Extras properties, set 16
F
favorites settings, use 17
G
Graphics properties, set 15
H
help, use 17
I
install
printer driver
Windows
 4
installing
Linux software
 28
L
Layout properties, set
Windows
 14
Linuxdriver, install
 28
printer properties 32
printing 33
scanning 34
M
Macintosh
driver
uninstall
 36
printing 39
scanning 40
setting up the printer 37
MFP driver, install
Linux
 28...