Samsung S24b350h User Manual

							31
Preparations
1
1 Preparations
1.3.3 Function Key Guide
To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. 
You can exit by pressing the JOG button again.
zUP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when 
the focus changes.
zPRESS(ENTER): The selected item will be applied.
IconsDescription
Selects [ ] to change the input signal by moving the JOG button 
in the Function Key Guide screen. A message will appear on the top 
left corner of the screen if the input signal has been changed.
zSelects [ ] by moving the JOG button in the function key 
guide screen. The OSD (On Screen Display) of your Monitor’s 
feature appears.
zOSD control lock: Maintain the current settings, or lock the OSD 
control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT 
button for 10 seconds when the main menu displayed.
 If the OSD control is locked,
Brightness /Contrast  and  Bright can be adjusted, and 
INFORMATION  can be viewed.
 
zSelects [ ] to adjust the screen settings automatically by 
moving the JOG button in the function key guide screen.
 zChanging the resolution in Displa y Properties will activate the 
Auto Adjustment  function.
zThis function is only available in Analog  mode. 
Selects [ ] to turn the Monitor off by moving the JOG button in the 
function key guide screen.
AUTO
Return
SAMSUNGMAGIC
 
						

							32
Preparations
1
1 Preparations
 Actual models because of functional variation, Function key guide options will be different. Please run 
the corresponding function based on the actual icon and description.
  When the monitor displays nothing (i.e. Power savi ng mode or Non-signal mode), 2 direct keys for 
control source and power could be used as below.
 
JOG ButtonPower saving/Non-signal mode
UP Source Change
Down
PRESS(ENTER) for 2 seconds Power Off
 
						

							33
Preparations
1
1 Preparations
1.3.4 Reverse Side (S19C350NW)
 zThe color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
zProvided ports may vary depending on the product. 
PortDescription
Connect to the DC power adapter.
Connect to a PC using the D-SUB cable.
 DVI INDC14V RGB IN
DC14V  RGB  IN
DC14V
RGB IN
 
						

							34
Preparations
1
1 Preparations
1.3.5 Reverse Side (S22C350B / S23C350B / S24C350BL)
 zThe color and shape of parts may differ from what  is shown. Specifications are subject to change
without notice to improve quality.
zProvided ports may vary depending on the product. 
PortDescription
Connect to the DC power adapter.
Connects to a source device via a DVI cable.
Connect to a PC using the D-SUB cable.
 DVI INDC14V RGB IN
DC14V  RGB  INDVI IN
DVI IN
DC14V
DVI IN
RGB IN
 
						

							35
Preparations
1
1 Preparations
1.3.6 Reverse Side (S22C350H / S23C340H / S23C350H / S24C340HL / 
S24C350H / S24C350HL / S27C350H)
 zThe color and shape of parts may differ from what  is shown. Specifications are subject to change
without notice to improve quality.
zProvided ports may vary depending on the product. 
PortDescription
Connect to the DC power adapter.
Connect to a source device using an HDMI cable.
 The [HDMI IN] terminal is supplied for the HDMI-dedicated 
models only.
 
Connect to a PC using the D-SUB cable.
Connect to an audio output device such as headphones.
 This function is only available in  HDMI mode. 
 DVI INDC14V RGB IN
DC14V  RGB  INHDMI IN
HDMI IN
DC14V
HDMI IN
RGB IN
 
						

							36
Preparations
1
1 Preparations
1.4 Installation
1.4.1 Attaching the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen 
is facing downwards.
 
Insert the stand  neck into the 
stand base in the direction 
shown in the figure. Check that the stand neck is 
firmly connected.
Tightly fasten the connecting 
screw at the bottom of the 
stand base.
Place a soft cloth over the table 
to protect the product and 
place the product onto the 
cloth so that the front of the 
product is facing downwards.Hold the main body of the 
product with your hand as 
shown by the figure.
Push the assembled stand into 
the main body in the direction 
of the arrow as shown in the 
figure.- Caution
Do not hold the product upside 
down only by the stand.
 
						

							37
Preparations
1
1 Preparations
1.4.2 Removing the Stand
Place a soft cloth over the table to protect the product and 
place the product onto the cloth so that the front of the product 
faces downwards.
While holding the stand neck with one hand, pound the other 
fisted hand down onto the top of the stand base in the direction 
of the arrow to detach the stand base.
Turn the connecting screw at the bottom of the stand base to 
separate it.
Remove the stand neck from the stand base by pulling it in the 
direction of the arrow as shown in the figure.
 
						

							38
Preparations
1
1 Preparations
1.4.3 Adjusting the Product Tilt
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
zYou can adjust the tilt of your monitor.
zHold the lower part of the product and adjust the tilt carefully. 
-1° (±2°) ~ 20° (±2°)
 
						

							39
Preparations
1
1 Preparations
1.4.4 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape 
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft 
locking device for details. The lock device is sold separately.
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
To lock an anti-theft locking device:
1Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2Put one end of the cable through the loop on the other end.
3Insert the Kensington Lock into the security slot on the back of the display.
4Lock the locking device.
 zAn anti-theft locking device can be purchased separately.
zRefer to the user guide provided with y our anti-theft locking device for details.
zAnti-theft locking devices can be purch ased at electronics retailers or online.
 
DC14V DVI  IN RGB INDC14VDVI IN
RGB IN
 
						

							402 Connecting and Using a Source Device
2 
Connecting and Using a Source Device
2.1 Before Connecting
2.1.1 Pre-connection Checkpoints
zBefore connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
zDo not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
zCheck the types of ports at the back of the product you want to connect.
zProvided ports may vary depending on the product.
2.2 Connecting the Power
zConnect the power adapter to [DC14V] jack on the rear of the product. Connect the power cable to 
the DC power adapter. 
Next, connect the DC power adapter to the product. Plug in the power cable to the power socket.
 The input voltage is switched automatically. 
DC14V DVI  INRGB INDC14VDVI IN
RGB IN
DC14VDVI IN RGB IN
DC14V