Samsung S24b350h User Manual

							21
Before Using the Product
 Before Using the Product
Correct posture to use the product 
Use the product in the correct posture as follows:
zStraighten your back.
zAllow a distance of 45 to 50 cm between your eye and the screen, and look slightly 
downward at the screen. 
Keep your eyes directly in front of the screen. 
zAdjust the angle so light does not reflect on the screen.
zKeep your forearms perpendicular to your upper arms and level with the back of 
your hands.
zKeep your elbows at about a right angle.
zAdjust the height of the product so you can keep your knees bent at 90 degrees or 
more, your heels attached to the floor, and your arms lower than your heart.
50 cm
 
						

							221 Preparations
1 
Preparations
1.1 Checking the Contents 
1.1.1 Removing the Packaging
1Open the packaging box. Be careful not to damage the product when you open the packaging with 
a sharp instrument.
2Remove the styrofoam from the product.
3Check the components and remove the styrofoam and plastic bag.
 This image is for reference only. 
4Store the box in a dry area so that it can be used when moving the product in the future.
 
						

							23
Preparations
1
1 Preparations
1.1.2 Checking the Components
 zContact the dealer where you purchased the product if any components are missing.
zThe appearance of the components may differ from the images shown. 
Components
 Components may vary depending on the country. 
Quick Setup guideWarranty card
(Not available In some locations) User Manual
Power cableDC power adapter
D-SUB cable (optional)
DVI cable (optional) HDMI cable (optional)HDMI-DVI cable (optional)
Stand baseStand neck
 
						

							24
Preparations
1
1 Preparations
1.2 Parts (S19C350NW)
1.2.1 Frontal Button 
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
IconsDescription
JOG Button Multi directional button that helps navigate.
 JOG button is located in the bottom of the screen center, and has 5 
directions as UP/DOWN/LE
FT/RIGHT/PRESS(ENTER).
 
 (Power LED)This LED is power status indicator and works as
zPower On (Power button): Off
zPower saving mode: Blinking
zPower Off (Power button): On
 The power Indicator operation can be swapped by changing in the 
menu. (
SETUP&RESET   Power LED On )
Actual models because of functional variation maybe haven’t this 
function.
 
Function Key Guide Press the JOG button when the screen is turned on. The Function Key 
Guide will appear. To access the on
screen menu when the guide is 
displayed, press the corresponding direction button again. Function Key Guide may vary depending on the function or product 
model. Please refer to the actual product.
 
Function Key Guide
JOG Button
Power LED
Return
LEFT
AUTO
ReturnAUTO
Return
DOWN(FRONT)
UP(REAR) RIGHT
PRESS(ENTER)
 
						

							25
Preparations
1
1 Preparations
1.2.2 Direct Key guide
For guidance on shortcut keys, the below OSD (On  Screen Display) will be displayed if you move the JOG 
button in any direction.
zUP/DOWN/LEFT/RIGHT: Adjust Brightness.
zPRESS(ENTER): Display Function Key Guide.
Brightness
Features
 
						

							26
Preparations
1
1 Preparations
1.2.3 Function Key Guide
To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. 
You can exit by pressing the JOG button again.
zUP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when 
the focus changes.
zPRESS(ENTER): The selected item will be applied.
IconsDescription
Selects [ ] to change the input signal by moving the JOG button 
in the Function Key Guide screen. A message will appear on the top 
left corner of the screen if the input signal has been changed.
zSelects [ ] by moving the JOG button in the function key 
guide screen. The OSD (On Screen Display) of your Monitor’s 
feature appears.
zOSD control lock: Maintain the current settings, or lock the OSD 
control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT 
button for 10 seconds when the main menu displayed.
 If the OSD control is locked,
Brightness /Contrast  and  Bright can be adjusted, and 
INFORMATION  can be viewed.
 
Select [] to adjust the Brightness or Contrast.
This setting can be changed by  moving the JOG button in the 
function key guide screen. Move  the JOG button Up/Down to 
alternate between the 
Brightness and Contrast settings.
AUTO
Return
SAMSUNGMAGIC
 
						

							27
Preparations
1
1 Preparations
 Actual models because of functional variation, Function key guide options will be different. Please run 
the corresponding function based on the actual icon and description.
  When the monitor displays nothing (i.e., power savin g mode or no-signal mode), a direct access key 
can be used to control the power status as shown below.
 
zSelects [ ] to adjust the screen settings automatically by 
moving the JOG button in the function key guide screen.
 zChanging the resolution in Displa y Properties will activate the 
Auto Adjustment  function.
zThis function is only available in Analog  mode. 
Selects [ ] to turn the Monitor off by moving the JOG button in the 
function key guide screen.
JOG ButtonPower saving/Non-signal mode
PRESS(ENTER) for 2 seconds Power Off
IconsDescription
 
						

							28
Preparations
1
1 Preparations
1.3 Parts (S22C350B / S23C350B / S24C350BL / S22C350H / 
S23C340H / S23C350H /  S24C340HL / S24C350H / 
S24C350HL / S27C350H)
1.3.1 Frontal Button
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
IconsDescription
JOG Button Multi directional button that helps navigate.
 JOG button is located in the bottom of the screen center, and has 5 
directions as UP/DOWN/LE
FT/RIGHT/PRESS(ENTER).
 
Function Key Guide
JOG Button
Power LED
Return
LEFT
AUTO
ReturnAUTO
Return
DOWN(FRONT)
UP(REAR) RIGHT
PRESS(ENTER)
 
						

							29
Preparations
1
1 Preparations
 (Power LED)
This LED is power status indicator and works as
zPower On (Power button): Off
zPower saving mode: Blinking
zPower Off (Power button): On
 The power Indicator operation can be swapped by changing in the 
menu. (
SETUP&RESET   Power LED On )
Actual models because of functional variation maybe haven’t this 
function.
 
Function Key Guide Press the JOG button when the screen is turned on. The Function Key 
Guide will appear. To access the on
screen menu when the guide is 
displayed, press the corresponding direction button again. Function Key Guide may vary depending on the function or product 
model. Please refer to the actual product.
 
IconsDescription
 
						

							30
Preparations
1
1 Preparations
1.3.2 Direct Key guide
For guidance on shortcut keys, the below OSD (On  Screen Display) will be displayed if you move the JOG 
button in any direction.
 Models with sound option 
zUP/DOWN: Adjust  Brightness.
zLEFT/RIGHT: Adjust Volume .
zPRESS(ENTER): Display Function Key Guide.
 Models without sound option 
zUP/DOWN/LEFT/RIGHT: Adjust Brightness.
zPRESS(ENTER): Display Function Key Guide.
Brightness
Volume
Features
Brightness
Features