Samsung S24b350h User Manual

							111
Setup and Reset (S22C350H / S23C340H / 
S23C350H / S24C340HL / S24C350H / 
S24C350HL / S27C350H)
10
10 Setup and Reset (S22C350H / S23C340H / S23C350H / S24C340HL / S24C350H / S24C350HL / S27C350H)
10.3 Off Timer
You can set the product to automatically turn off.
10.3.1 Configuring Off Timer
1When the Function Key Guide appears, select  [] by moving the JOG button UP.
Next, press the JOG button.
2Move to  SETUP&RESET  controlling the JOG button UP/D OWN and press the JOG button.
3Move to Off Timer controlling the JOG button UP/D OWN and press the JOG button. 
The following screen will appear.
zOff : Deactivate the off timer so that the  product does not power off automatically.
zOn: Activate the off timer so that the product powers off automatically.
4Move to the desi red option controlling th e JOG button UP/DOWN an d press the JOG button.
5The selected option will be applied.




SETUP&RESET
2II
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
  
Off
On
Return Enter
Move
 
						

							112
Setup and Reset (S22C350H / S23C340H / 
S23C350H / S24C340HL / S24C350H / 
S24C350HL / S27C350H)
10
10 Setup and Reset (S22C350H / S23C340H / S23C350H / S24C340HL / S24C350H / S24C350HL / S27C350H)
10.4 Turn Off After
The off timer can be set within a ra nge of 1 to 23 hours. The product will automatically power off after the 
specified number of hours. 
 This menu is available only when  Off Timer is set to On. 
10.4.1 Configuring Turn Off After
1When the Function Key Guide appears, select  [] by moving the JOG button UP.
Next, press the JOG button.
2Move to  SETUP&RESET  controlling the JOG button UP/D OWN and press the JOG button.
3Move to Turn Off After  controlling the JOG bu tton UP/DOWN and press the JOG button.
The following screen will appear.
4Adjust the  Turn Off After  controlling the JOG button UP/DOWN.
5The selected option will be applied.
 For products for the market in Europe, the  Off Timer is set to automatically activate 4 hours after the 
product powers on. This is done in accordance with power supply regulations. If you do not want the 
timer to activate, go to  MENU  SETUP&RESET and set  Off Timer to Off.
 





SETUP&RESET
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
  
On
Return
Enter
Adjust
 4h
ª

 
						

							113
Setup and Reset (S22C350H / S23C340H / 
S23C350H / S24C340HL / S24C350H / 
S24C350HL / S27C350H)
10
10 Setup and Reset (S22C350H / S23C340H / S23C350H / S24C340HL / S24C350H / S24C350HL / S27C350H)
10.5 PC/AV Mode
Set  PC/AV Mode to  AV. The picture size will be enlarged. This option is useful when you view a movie. 
 zThis function does not support Analog  mode.
zSupplied for the wide models only such as 16:9 or 16:10. 
10.5.1 Configuring PC/AV Mode
1When the Function Key Guide appears, select  [] by moving the JOG button UP.
Next, press the JOG button.
2Move to  SETUP&RESET  controlling the JOG button UP/D OWN and press the JOG button.
3Move to PC/AV Mode  controlling the JOG button UP/DOWN and press the JOG button. 
The following screen will appear.
4Move to the desi red option controlling th e JOG button UP/DOWN an d press the JOG button.
5The selected option will be applied.





SETUP&RESET
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
  
On
K
Return
Enter
Move
:  PC  
   AV
 
ó
PC/AV Mode
HDMI
Return Enter
Move
 
						

							114
Setup and Reset (S22C350H / S23C340H / 
S23C350H / S24C340HL / S24C350H / 
S24C350HL / S27C350H)
10
10 Setup and Reset (S22C350H / S23C340H / S23C350H / S24C340HL / S24C350H / S24C350HL / S27C350H)
10.6 Key Repeat Time
Control the response rate of a button when the button is pressed. 
10.6.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select  [] by moving the JOG button UP.
Next, press the JOG button.
2Move to  SETUP&RESET  controlling the JOG button UP/D OWN and press the JOG button.
3Move to Key Repeat Time  controlling the JOG button UP/DOWN and press the JOG button. 
The following screen will appear.
zAcceleration , 1 sec , or 2 sec  can be selected. If  No Repeat is selected, a command responds 
only once when a button is pressed.
4Move to the desi red option controlling th e JOG button UP/DOWN an d press the JOG button.
5The selected option will be applied.





SETUP&RESET
2II
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
  
2Q
 4K
Acceleration
1 sec
2 sec
No Repeat
Return Enter Move
 
						

							115
Setup and Reset (S22C350H / S23C340H / 
S23C350H / S24C340HL / S24C350H / 
S24C350HL / S27C350H)
10
10 Setup and Reset (S22C350H / S23C340H / S23C350H / S24C340HL / S24C350H / S24C350HL / S27C350H)
10.7 Source Detection
You can activate  Source Detection .
10.7.1 Configuring Source Detection
1When the Function Key Guide appears, select  [] by moving the JOG button UP.
Next, press the JOG button.
2Move to  SETUP&RESET  controlling the JOG button UP/D OWN and press the JOG button.
3Move to Source Detection  controlling the JOG bu tton UP/DOWN and press the JOG button. 
The following screen will appear.
zAuto : The input source is automatically recognized.
zManual : Manually select an input source.
4Move to the desi red option controlling th e JOG button UP/DOWN an d press the JOG button.
5The selected option will be applied.





SETUP&RESET
Off
Acceleration
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
  
On
K
$XWR
0DQXDO
Return Enter
Move
 
						

							116
Setup and Reset (S22C350H / S23C340H / 
S23C350H / S24C340HL / S24C350H / 
S24C350HL / S27C350H)
10
10 Setup and Reset (S22C350H / S23C340H / S23C350H / S24C340HL / S24C350H / S24C350HL / S27C350H)
10.8 Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
10.8.1 Configuring Power LED On
1When the Function Key Guide appears, select  [] by moving the JOG button UP.
Next, press the JOG button.
2Move to  SETUP&RESET  controlling the JOG button UP/D OWN and press the JOG button.
3Move to Power LED On  controlling the JOG button UP/DOWN and press the JOG button. 
The following screen will appear.
zWorking : The power LED is on when the product is turned on.
zStand-by : The power LED is on when the product is turned off.
4Move to the desi red option controlling th e JOG button UP/DOWN an d press the JOG button.
5The selected option will be applied.

SETUP&RESET
Power LED On
  Working
Stand-by
Return Enter
Move
 
						

							11711 INFORMATION Menu and Others
11 
INFORMATION Menu and Others
11.1 INFORMATION
View the current input source, frequency and resolution.
11.1.1 Displaying INFORMATION
1When the Function Key Guide appears, select [] by moving the JOG button UP.
Next, press the JOG button.
2Move to   INFORMATION  controlling the JOG button UP /DOWN and press the JOG button.
The following screen will appear.
 The displayed menu items may vary depending on the model. 
SETUP&RESET
Exit Enter
Move
PICTURE
COLOR
MENU SETTINGS 
INFORMATION
Analog
**kHz **Hz NP
**** x ****
Optimal Mode
**** x **** **Hz
 
						

							118
INFORMATION Menu and Others
11
11 INFORMATION Menu and Others
11.2 Configuring Brightness and Contrast in the Initial Screen
Adjust the Brightness and Contrast  by moving the JOG button when the Direct Key Guide is displayed 
on the screen.
1When you control the JOG button LEFT/R IGHT, the following screen will appear.
2Move to Brightness   Contrast , Contrast   Brightness , controlling the JOG button 
UP/DOWN.  
3Adjust the Brightness  and Contrast  controlling the JOG button LEFT/RIGHT. 
Enter
Adjust
Brightness
Enter
Adjust
Contrast
ª
ª

 
						

							119
INFORMATION Menu and Others
11
11 INFORMATION Menu and Others
11.3 Configuring Volume in the Initial Screen
Adjust the Volume by moving the JOG button when the Direct Key Guide is displayed on the screen.
1When you control the JOG button LEFT/R IGHT, the following screen will appear.
2Adjust the Volume controlling the JOG button LEFT/RIGHT.
 zThis function is only available in  HDMI mode.
zThe function may not be supported depending on the ports provided with the product.
 
Enter
Adjust
Volume
 
						

							12012 Installing the Software
12 
Installing the Software
12.1 MagicTune
12.1.1 What is "MagicTune"?
"MagicTune" is a software program that helps with monitor adjustments by providing comprehensive 
descriptions of monitor functions and easy-to-understand guidelines.
You can adjust the product with the mouse and the keyboard without using the operating buttons of the 
product.
12.1.2 Installing the Software
1Insert the installation CD into the CD-ROM drive.
2Select the "MagicTune" setup program.
 If the pop-up screen for the software installation does not appear on the main screen, find and 
double-click the "MagicTune" setup file on the CD-ROM.
 
3Select the installation language and click "Next".
4Complete the remaining software installation steps according to the instructions displayed on the 
screen.
 zThe software may not work properly if you do not restart the computer after the installation.
zThe "MagicTune" icon may not appear depending on the computer system and the product 
specifications.
zIf the shortcut icon does not appear, press the F5 key. 
Restrictions and Problems with the Installation ("MagicTune™")
The installation of "MagicTune™" may be affected by the Graphics Card, Motherboard and the 
Networking Environment.
System Requirements
OS
zWindows XP, Windows Vista, Windows 7, Windows 8