Samsung Prostar Dcs Compact Lcd24b, Lcd12b, Std24b, Basic 12b, 7b KeySet User Guide

16  Press the CALL button or C.O. line key to return to the outside party and
begin the transfer process again.
When you are transferring a call to a keyset set for Voice Announce or Auto
Answer, the transferred call will always ring.
NOTES:
1. After the inside party answers, you may alternate back and forth between
the parties by pressing the TRSF key.
2. If you receive No More Calls tone, that station has no key available to re-
ceive another call. Press TRSF to return to the other party.
3. You...

2. The station that receives a Forwarded All call can transfer the call to the
forwarded station. This is useful when you are expecting an important call
but you do not wish to be disturbed by other calls.
3. When a station user places his/her keyset in Forward All mode and he/she
does not have a FORWARD ALL key, the TRSF key will light to indicate
Forward All has been set and calls to this station have been transferred
elsewhere.FORWARD BUSYTo forward calls to another station when you are on the phone:...

Press the right soft key to move the cursor
 Dial the destination number (e.g., 202)
OR
Press UP or DOWN to select the destination
Press the right soft key to move the cursor
 Dial 1 to set
OR
Press UP or DOWN to select YES or NO
 Press TRSF to store and exit
STATION CALL PICKUPTo pick up (answer) a call ringing at another station, lift the handset and dial 65
plus the extension number of the ringing phone.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press...

22  The E key is used to hide digits. Display keyset users may want to hide
some speed dial numbers so that they will not show in the display. When you
are entering a telephone number, press E. All subsequent digits will be hid-
den. Press E again to begin displaying digits.
 The F key is used to enter a name. See 
Personal Speed Dial Names
 under
Display Features.
 Use the HOLD key to clear a speed dial number.ONE TOUCH SPEED DIALINGYou may assign any speed dial number to an already existing One...

24
PAGING AND MESSAGING
MAKING AN INTERNAL PAGETo make an announcement through the keyset speakers:
 Lift the handset.
 Press the PA G E key or dial 55.
 Dial the desired zone number 1, 2, 3 or 4.
OR
Dial 0 to page all internal zones.
 After the attention tone, make your announcement.
NOTE: If you have a dedicated page zone key, it is not necessary to press
PA G E and dial a zone number.MAKING AN EXTERNAL PAGETo make an announcement through the external paging speakers:
 Lift the handset.
 Press...

CANCELING MESSAGESTo cancel a message indication that you left at another station, dial 42 plus the
extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial 42 plus your exten-
sion. Your MSG light will go out.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK before you begin dialing.RETURNING MESSAGES Press the MSG key or dial 43. The first station that left a message will be
called...

APPOINTMENT REMINDER/ALARM
CLOCKThis feature works like an alarm clock. Use it to remind yourself of an appoint-
ment later in the day (TODAY ONLY) or as a daily reminder every day (DAILY).
You can set up to three alarms. Each one can be either a TODAY ONLY or a
DAILY alarm.
When the alarm rings, you will hear three short rings repeated three times. Lift
the handset to answer the alarm. If you do not, the alarm will alert you two more
times at five minute intervals.
To set alarms:
 Press TRSF and then...

 Enter the account code (maximum 12 characters including ✱ and #). Press
the ACCT key again. Your conversation will not be interrupted.
NOTE: If you make an error before you complete the account code, press the
ACCT key twice and redial the correct code. Only the last account code dialed
will be printed.LOCKING YOUR  KEYSETYou can lock your keyset to prevent other people from making or receiving calls
with it while you are away. You can unlock it when you return.
 While on-hook, press TRSF and then...

32
CUSTOMIZING YOUR  KEYSET
SELECT RING TONEEach keyset user can select any one of eight ring frequencies:
 While on-hook, press TRSF and then dial 111.
 Dial 1–8 or press the UP and DOWN keys to hear each tone.
 When you hear the tone that you prefer, press TRSF to save it.CHANGE YOUR  PASSCODEFrom the factory, your station passcode is 1234. You can change your station
passcode whenever you desire.
 While on-hook, press TRSF and then dial 101.
 Dial your old passcode.
 Dial a new passcode (must be...

RING PREFERENCEThis feature automatically answers ringing calls when you lift the handset or
press the ANS/RLS key. This method will always answer calls in the order they
arrived at your keyset. When you turn ring preference off, you must press the
flashing button to answer a call, allowing you to answer calls in the order you
choose.
 With the handset on-hook, press TRSF and then dial 110.
 Dial 61 to turn ring preference on or 60 to turn it off.
 Press TRSF to store your selection.
3435
DISPLAY...