Samsung Prostar Dcs Compact Lcd24b, Lcd12b, Std24b, Basic 12b, 7b KeySet User Guide

PROSTAR DCS COMPACT
DIGITAL COMMUNICATIONS SYSTEM
• LCD 24B
 LCD 12B
 STD  24B
 BASIC 12B
7B
KEYSET USER GUIDE
System Software Release 1, 2
November 1997     

TABLE OF CONTENTS
ABOUT THIS  BOOK
........................................................... 1
THINGS YOU SHOULD KNOW
................................ 2–9
OUTSIDE CALLSMaking an Outside Call .................................................................... 10
Answering an Outside Call ............................................................... 10
Universal Answer ............................................................................. 10
Recall/Flash...

CUSTOMIZING YOUR  KEYSETSelect Ring Tone .............................................................................. 32
Change Your  Passcode .................................................................... 32
Set Answer Mode ............................................................................. 32
Automatic Hold ................................................................................. 32
Headset Operation ..............................................................................

THINGS YOU SHOULD KNOW
USER ORIENTATIONPROSTAR DCS COMPACT telephones are called “keysets.” They contain but-
tons or “keys” that are used to access or activate the many features of your
office phone system. The keys with paper designation strips are programmable
keys. This means they can be programmed for a specific function on your keyset
and that same button can be something different on another keyset. See the
system manager to get your most frequently used features assigned to your
programmable...

4
5
LCD 24B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
VOL
SPK
HOLD TRSFANS/
1
2ABC
3DEF
4GHI
5JKL
6MNO
7PRS
8TUV
9WXY
0OPER
RLS
SCROLL
HOLD KEY
TRANSFER KEY
ANSWER/RELEASE KEY
PULLOUT
DIRECTORY TRAY
32 CHARACTER DISPLAY
Two
lines with 16 characters each. SOFT KEYS
Used to
activate features via
the display....

6LCD 12B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
7
STD 24B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
VOL
SPK...

8BASIC 12B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
9
7B KEYSET LAYOUT 
[RELEASE 2 ONLY]
LABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and...

OUTSIDE CALLS
MAKING AN OUTSIDE CALL Lift the handset and press an idle outside line button, line group button or
dial a line access code to receive dial tone—OR—to use the speakerphone,
press an idle outside line button, line group button or dial a line access code
to receive dial tone through the speaker—OR—press SPK, receive inter-
com dial tone and dial a line access code.
 Dial the telephone number.
 Finish the call by replacing the handset or pressing the ANS/RLS key.
NOTE: You will receive No...

INTERCOM CALLS
CALLING OTHER STATIONS Dial the extension number or group number.
 Wait for the par ty to answer. If you hear a brief tone burst instead of ringback
tone, the station you called is set for Voice Announce or Auto Answer. Begin
speaking immediately after the tone.
 Finish the call by replacing the handset or pressing the ANS/RLS key.
NOTES:
1. If you have a DSS key assigned to an extension or station group, you may
press this key instead of dialing the number.
2. If the Hot Keypad feature...

CALL PROCESSING
SYSTEM HOLD When you are connected to any call, press HOLD. The call will flash green at
your keyset. If this call appears on a line key at other keysets, it will flash
red at those keysets.
 To take the caller off hold, press that key and the green flashing light will go
steady green again. Resume the conversation.
NOTE: While on a call, pressing a line key, route key or flashing CALL button
will automatically put your first call on hold and connect you to the new call. SeeAutomatic...