Samsung Projector Sp H700 User Manual
Have a look at the manual Samsung Projector Sp H700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Connecting to PCConnecting to PC Connecting to PCYou can connect a PC to the projector and use it as a monitor. Connecting to PCConnecting to PC6061 Turn on the projector and press the PCbutton to select PC. If the projector is connected to DVI, press the DVIbutton to select DVI.■If PC Mode is not available, check PC video cable is in place.Turn on the PC and set the PC Environment when necessary. (Page 59) Adjust the screen. (Pages 62~65) 1 2 3NOTE ■Enjoy better picture quality by using DVI-D cable (supports digital signals only) instead of PC Video cable.■DVI-I cable (supports analog signals) is not supported. Use DVD-D cable. ■Sound comes out from PC speakers. NOTE This product supports Plug & Play. No driver installation is needed for Windows XP. CAUTION DVI-D cable does not support analog RGB signals. PC Video Cable (15-pin signal) DVI-D (supports only digital signals) Rear side of Projector PC1 PC DVI-D Video CablePC Video Cable orRear Connection Using PC Video Cable or DVI Cable1 DVI-D Port Viewing the PC Screen This appliance supports VESA Plug & Playand recognizes connection to PC automatically.VESA Plug & PlayPin Configuration of PC Video Port Plug Connect PC(RGB In) port on the rear side of the projector to the monitor output port of PC using PC video cable.■If PC has a DVI output port, connect it to DVIport of the projector. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15Red (R) Green (G) Blue (B) Ground Ground (DDC) Red (R) Ground Green (G) Ground Blue (B) Ground Reserved Ground Sync Ground Data (DDC) Horizontal Sync Vertical Sync Clock (DDC)Pin No. PC Input 1 2 3 4 5 6 7 8 9 10 11 12T. M .D.S. DATA2 - T. M .D.S. DATA2+ T. M .D.S. DATA2/4 Shield T. M .D.S. DATA4 - T. M .D.S. DATA4+ Clock (DDC) Data (DDC) No Connection T. M .D.S. DATA1 - T. M .D.S. DATA1+ T. M .D.S. DATA1/3 Shield T. M .D.S. DATA3 - Pin No. Signal 13 14 15 16 17 18 19 20 21 22 23 24T. M .D.S. DATA3+ +5V Power Ground for 5V Hot Plug Detect T. M .D.S. DATA0 - T. M .D.S. DATA0+ T. M .D.S. DATA0/5 Shield T. M .D.S. DATA5 - T. M .D.S. DATA5+ T.M.D.S. Clock Shield T.M.D.S. Clock+ T. M .D.S. Clock - Pin No. Signal
Connecting to PCFrequency Adjustment Automatic Picture AdjustmentUsed to adjust frequency and phase of PC screen automatically. Connecting to PCAutomatic Picture Adjustment6263 Before adjusting!Set the input mode to PC. 1 MENU2, 3, 4Select2, 3…/†5EXIT 1 MENU2, 3, 4Select2, 3, 4…/†/œ/√ 5EXIT PC Press the MENUbutton.The main menu is displayed. 1 Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the button. 2 Press the ▲or ▼button to move to PC, then press the button.The Auto Adjustmentis selected. 3 Press the EXITbutton to exit the menu. 5 Press the button.Auto Adjustment in progressmessage is displayed and PC screen is adjusted automatically. 4 Frequency Adjustment Used to adjust frequency when vertical lines appear on PC screen. Before adjusting!Set the input mode to PC. PC Press the MENUbutton.The main menu is displayed. 1 Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the button. 2 Press the ▲or ▼button to move to PC, then press the button.The PCmenu is displayed. 3 Press the EXITbutton to exit the menu. 5 Press the ▲or ▼button to move to Coarse, then press the button. Press the œor √button to adjust. 4 Auto Adjustment in Progress.. Please Wait Setup Install : Front-Floor √ Light Setting : Theater√ V-Keystone√ Test Pattern √ PC√ Factory Default√ Information√ Move Enter Return PC Auto Adjustment√ Coarse 1344 Fine 0 Zoom√ Reset√ Move Enter Return PC Auto Adjustment√ Coarse 1344 Fine 0 Zoom√ Reset√ Move Enter Return 1344 … Coarse †
Connecting to PCZooming the Screen Fine Tuning with the Phase AdjustmentUsed to fine tune the PC screen. Connecting to PCFine Tuning with the Phase Adjustment6465 1 MENU2, 3, 4Select2, 3, 4…/†/œ/√ 5EXIT Before adjusting!Set the input mode to PC. PC Press the MENUbutton.The main menu is displayed. 1 Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the button. 2 Press the ▲or ▼button to move to PC, then press the button.The PCmenu is displayed. 3 Press the EXITbutton to exit the menu. 5 Press the ▲or ▼button to move to Fine, then press the button. Press the œor √button to adjust. 4 PC Auto Adjustment√ Coarse 1344 Fine 0 Zoom√ Reset√ Move Enter Return 0 1 MENU 2, 3, 4, 5 Select 2, 3, 4, 5…/†/œ/√ 6EXITZooming the ScreenUsed to extend PC screen from the center. Before adjusting!Set the input mode to PC. PC Press the MENUbutton.The main menu is displayed. 1 Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the button. 2 Press the ▲or ▼button to move to PC, then press the button.The PCmenu is displayed. 3 Press the EXITbutton to exit the menu. 6 Press the ▲, ▼, œ, or √ button to move to desired position, then press the button to extend as you want.The screen can be extended by 1, 2, 4,or 8 times. 5 Press the ▲or ▼button to move to Zoom, then press the button. 4 x2Move Zoom Return PC Auto Adjustment√ Coarse 1344 Fine 0 Zoom√ Reset√ Move Enter Return … Fine †
Connecting to PCReset the PC Connecting to PCReset the PC67 66 1 MENU 2, 3, 4, 5 Select 2, 3, 4, 5…/†/œ/√ 6EXITReset the PCUsed to reset PC mode settings to the Factory Default values. Before adjusting!Set the input mode to PC. PC Press the MENUbutton.The main menu is displayed. 1 Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the button. 2 Press the ▲or ▼button to move to PC, then press the button.The PCmenu is displayed. 3 Press the EXITbutton to exit the menu. 6 Press the œor √button to move to OK, then press the button.The PC is reset to the time of purchasing. 5 Press the ▲or ▼button to move to Reset, then press the button. 4 PC Auto Adjustment√ Coarse 1344 Fine 0 Zoom√ Reset√ Move Enter ReturnReset MoveOKBack to Default Settings? Cancel EnterReturn VISUAL REALISM Troubleshooting Before Contacting Service Personnel........68
TroubleshootingBefore Contacting Service Personnel TroubleshootingBefore Contacting Service Personnel69 68 Screen and External Source Symptoms Troubleshooting Note Installation and ConnectionMenu and Remote Control Be sure that the power cord in place and the power switch on the rear side of the projector is turned on -. No Power. Page 15 Be sure to make the projection beam perpendicular to the screen and adjust the focus using the Zoom Knob and the Focus Ring. Avoid to use the V-Keystone function if possible. Image is distorted or trapezoidal. Pages 16~20 Ceiling bracket is an optional accessory. Please contact your dealer. Want to install projector on ceiling. Be sure that the connection cable (video) is properly connected to the proper port. Unless they are connected properly, the device is not available. Image is distorted or trapezoidal. Pages 23~25 Symptoms Troubleshooting Note ■Be sure that the proper external source is selected. ■Check batteries of the remote control. If there is a problem, replace them with recommended ones.■Check the angle and distance between the remote control and the projector. Be sure that there is no obstacle between the projector and the remote control that may block the signal.■Direct lighting of 3-way light bulbs or other lighting device on the remote sensor of the projector may affect the sensitivity and cause the remote control to malfunction. Remote control does not work. Page 26 Page 12 Page 13 Refer to the user manual. Some functions are locked depending on sources and type of the input signal. Some of Menu functions do not work. Pages 23~26 Symptoms Troubleshooting Note ■Be sure that the power cord of the projector is in place.■Be sure that the proper input source is selected.■Be sure that cable is properly connected to the rear panel of the projector.■Check the Remote Control batteries.■Be sure that the Color , Brightness settings are not at their lower limit. Cannot see picture images. Page 15 Page 26 Pages 23~25 Page 12 Page 31 Contact your service personnel if the noise continues due to defective parts. Strange noise. Adjust the Color and Brightness . Poor color. Page 31 ■Adjust the focus.■Check that the projection distance is either too far or too near to the screen. Images are not clear. Page 16 Page 19~20 Refer to instructions on lamp and repair. Repair indicator is on. Page 9 Noisy lines may appear for PC mode in case of frequency discrepancy. Adjust the vertical frequency of your video card on the advanced display property. Lines appear on screen. Page 63 Be sure to properly connect the external devices. Especially, connect the component (Y, Pb, Pr) cables matching the color codes. Green appears on the screen. Pages 23~25 Be sure that the proper operation of the external device. Adjustable items of the Custom Picture Menu are properly set. Cannot see the picture from the external devices. Pages 26, 31 Be sure to properly connect the external devices. Check the connection cables again. Only blue screen appears. Pages 26, 23~25 ■Adjustable items of the Custom Picture Menu are properly set. ■Execute Factory Default if you want to restore the factory default setting values. Screen appears in black and white or odd color/screen is too dark or bright. Page 31 Page 48 Before Contacting Service PersonnelIf this projector does not operate properly, check the following first. If the problem is continues, contact your dealer.
VISUAL REALISM Other Information Storage and Maintenance ..........................72 Purchasing Optional Parts ........................73 Structure of Screen Menu ..........................74 Lamp Replacement ......................................77 Specifications ..............................................78 Remote Control Specifications ..................79
Storage and MaintenanceClean and maintain the projector in the following way. Purchasing Optional PartsInformation for purchasing accessories or optional parts. Other Information Storage and Maintenance Other Information Purchasing Accessories73 72 Cleaning the Projector and LensUse a dry soft cloth.■Do not use flammable materials such as benzene and thinner. Do not use a wet cloth. It may result in malfunction.■Do not clean the lens using a fingertip or a sharp object. It may leave scratches.Cleaning the Inside of the ProjectorContact your dealer or service personnel to clean the inside of the projector.Contact your dealer if particles or other objects are stuck inside of the projector. Optional PartsYou can purchase at electronics shops or over the Internet. DVI-D Cable You can purchase at electronics shops or over the Internet. Or you can call your dealer or service center.Video (Composite) Cable S-Video Cable Component Cable PC Video Cable 1.5V AAA Batteries
Picture Size Full / Panorama / Zoom1 / Zoom2 / 4:3 Position DNIe Off / Demo / On Film Mode Off / On Overscan Off / On Structure of Screen MenuYou can see the entire structure of screen menu. Other Information Structure of Screen Menu Other Information Structure of Screen Menu75 Setup 74 Picture Mode Dynamic / Standard / Movie1 / Movie2 / User1 / User2 / User3 / CustomOpen Menu/Exit MenuPictureSource List Component1 / Component2 / S-Video / Composite / PC / DVI Edit Name Component1 / Component2 / S-Video / Composite / PC / DVI (Selected without Input) VCR / DVD / Cable / Satellite / AV Receiver / DVD Receiver / Game Camcorder / Combo / PC Input Buttons used for Screen Menu Select an item/change setting value Select Composite/S-Video/Component Input Mode Custom Picture Contrast 0 ~ 100 Brightness 0 ~ 100 Sharpness 0 ~ 100 Color 0 ~ 100 Tint 0 ~ 100 (Not supported in 480p mode or above) Color Standard SMPTE_C/HD/EBU Color Temperature 5500K / 6500K / 8000K / 9300K Gamma Gamma Mode1 / Gamma Mode2 / Gamma Mode3 Save User1 / User2 / User3Install Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling Light Setting Theater Bright V-Keystone -50 ~ 50 Test Pattern Crosshatch Screen Size Color Standard Red Green Blue White 6500K_White PC Auto Adjustment Coarse Fine Zoom Reset OK / Cancel Factory Default OK / Cancel Information Input Source List : Component1 √ Edit Name √ Move Enter ReturnPicture Picture Mode : Movie1 √ Custom Picture √ Picture Size : Full √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter Return Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter Return
Language English / Deutsch / Nederlands / Español / Français / Italiano / Svenska / Português / / Menu Position Menu Translucency Opaque / High / Medium / Low Menu Display Time 5 / 10 / 30 / 60 / 90 / 120 / Stay On Lamp Replacement Other Information Structure of Screen Menu Other Information Lamp Replacement77 Detach the screw of the lamp cover.Push to open the lamp cover in the direction of the arrow.Detach the three screws. Lift and grip the lamp handle in the direction of the arrow and pull it out.123 5 4 Reverse the disassembly procedure to assemble the unit after replacement. 76 Structure of Screen Menu (Continued) Menu Option ■Projector lamp requires replacement after.■Use the recommended lamp when replacing. Lamp specifications are defined in the user’s manual. Replace with the same model provided with the projector.-Lamp Model Name : LAMP-MERCURY-Philips -Lamp Manufacture : Philips Lighting-Lamp Life Time : 2000Hrs-Lamp Type : 250W UHP-Lamp Part Number : BP47-00010A ■Check that the power cord is unplugged before replacing lamps.■Wait for at least 30 minutes before replacing lamps to cool off the lamp unit after disconnecting power.■Lamp is a high-pressure product. Do not place near flammable materials or children.■Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device.■Be careful not to touch the lamp itself when handling the lamp unit.■If the lamp is poorly handled, it may result in poor picture quality or shorter life time of lamp.■The projector is will not operate normally if the cover is not locked completely after lamp replacement. Refer to LED information in the user’s manual if the projector does not operate normally.Cautions on Lamp ReplacementLamp Replacement Procedure NOTE ■The Lamp is high- temperature high- pressure product. Wait for at least 30 minutes to proceed after disconnecting power.■Be sure that the power cord is disconnected before proceeding. Menu Option Language : English √ Menu Position √ Menu Translucency : Opaque √ Menu Display Time : 120 Sec √ Move Enter Return
SpecificationsDesign and specifications of the product may be modified without prior notice for better performance. This appliance is Class B device that can be used in both residential and industrial areas. Remote Control Specifications Other Information Specifications Other Information Remote Control Specifications 78 79 Size Resolution Type Life Time Power Consumption Voltage Frequency Brightness Contrast (Theatre Mode) Screen Size Projection Range Keystone DVI PC Component 1 Component 2 S-Video Composite RS-232C Temperature and Humidity Device Classification Noise 0.8(HD2+) 0.63(ED2) 1280 x 720 1024 x 576 250W UHP 2000Hrs 350W AC 100-240V 50/60Hz 384 x 425 x 177 mm / 15.1 x 16.7 x 7.0 9.0 kg / 19.8 lb Owners Instructions, Power Cord, Remote control, Batteries 700 ANSI 600 ANSI 2800 : 1 2000 : 1Diagonal 30.385~300 Diagonal 40~200 1.0 ~ 13.6 m / 3.4 ~ 44.8 ft 1.3 ~ 8.8 m / 4.4 ~ 28.5 ft Vertical 1) Connector Type: DVI-D 2) Available Format: PC - VGA~SXGA DTV - 480p, 576p, 720p, 1080i 3) Frequency: Refer to page 63. 1) Connector Type: 15Pin D-Sub 2) Frequency: Refer to page 63. 1) Signal Type: Y, Pb, Pr 2) Available Format: 480i, 480p, 576i, 576p, 720p, 1080i 3) Frequency: Refer to page 63. Signal Format: NTSC, PAL, SECAM Service Port Operating Temperature (32~104ºF / 0~40ºC), Humidity (10~80%) Storage Temperature (-4~113ºF / -20~45ºC), Humidity (5~95%) Class B Min 28dB (Theater Mode) Model ClassificationSP-H700SP-H500 Panel Lamp Power Key Features Input/Output User EnvironmentDimensions Weight Accessories ButtonSystem Code Full Panorama Zoom1 Zoom2 4 : 3 Dynamic Standard Movie1 Movie2 User1 User2 User3 Custom07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 (Power) ON (Power) OFF COMP.1 (Component1) COMP.2 (Component2) COMPOSITE S-VIDEO PC DVI P.SIZE P.MODEButton Front-Floor Front-Ceiling Rear-Floor Rear-Ceiling CUSTOM STILL V.KEYSTONE INSTALL MENU QUICK INFO EXIT(Up) (Down) (Left) (Right) (Enter) Data Code 99 98 86 88 84 85 69 8A E4 E2 53 E1 E3 BD E8 E9 EA EB EC ED BCSystem Code 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07 07Data Code 1E 42 81 BB EE EF BF 1A 58 1F 2D 60 61 65 62 68 Function and Transmission Codes LEADER PULSE System Code System Code Data Code/Data Code (Reverse Data Code) 4.5msec 4.5msec 07h 07h Data /Data (Reverse Data) Remote Control Signal Format The DMD Panel used in Samsung Projectors consists of several hundred thousand micro mirrors. As with other visual display elements, the DMD Panel may include a few bad pixels. Samsung and the DMD Panel manufacturer have a rigid, bad pixel identification and limitation procedure in place and products will not exceed the maximum number of bad pixels set by our standards. Rarely, non-displayable pixels may exist, however it does not affect the overall picture quality nor the lifespan of the product.