Samsung Projector Sp H700 User Manual
Have a look at the manual Samsung Projector Sp H700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PreparationInstallation and Basic Adjustments20 INSTALLATION AND BASIC ADJUSTMENTSScreen Size and Projection DistanceNOTE This projector is designed to show images optimally on a 80 to 150 inch sized screen. Screen ScreenX Y 200 190 180 170 160 150 140 130 120 11 0 100 90 80 70 60 50 40442.8/174.3 420.6/165.6 398.5/156.9 376.3/148.1 354.2/139.5 332.1/130.7 309.9/122.0 287.8/113.3 265.7/104.6 243.5/95.9 221.3/87.1 199.2/78.4 177.1/69.7 155.0/61.0 132.8/52.3 110.7/43.6 88.6/34.9249.1/98.1 236.6/93.1 224.1/88.3 211.7/83.3 199.2/78.4 186.8/73.5 174.3/68.7 161.9/63.7 149.4/58.8 137.0/53.9 124.5/49.0 112.1/44.1 99.6/39.2 87.2/34.3 74.7/29.4 62.3/24.5 49.8/19.66.8/22.4 6.5/21.3 6.1/20.1 5.8/19.0 5.5/17.9 5.1/16.8 4.8/15.6 4.4/14.5 4.1/13.4 3.7/12.3 3.4/11.1 3.0/10.0 2.7/8.9 2.4/7.7 2.0/6.6 1.7/5.5 1.3/4.48.8/28.5 8.3/27.1 7.8/25.7 7.4/24.2 7.0/22.8 6.5/21.4 6.1/19.9 5.6/18.5 5.2/17.1 4.8/15.6 4.3/14.2 3.9/12.8 3.5/11.3 3.0/9.9 2.6/8.5 2.1/7.0 1.7/5.624.9/9.8 23.7/9.3 22.4/8.8 21.2/8.3 19.9/7.8 18.7/7.4 17.4/6.9 16.2/6.4 14.9/5.9 13.7/5.4 12.5/4.9 11.2/4.4 10.0/3.9 8.7/3.4 7.5/2.9 6.2/2.5 5.0/2.0 Diagonal Image Size (inch)Horizontal (X:cm/inch)Vertical (Y:cm/inch) Screen Size (16:9) Min (m/ft)Max (m/ft) Throw Distance (Z) Distance from Lens Center to Image Bottom (Z’:cm/inch) NOTE ■Z: Throw Distance ■Z: Distance from Lens Center to Image Bottom SP-H500 VISUAL REALISM Connections and Source SetupBefore Connections ....................................22 Connecting to Video Equipment ................23 Setting up the External Input Source ........26 Naming the External Connections ............27
1.Refer to the manual of the device the projector is connected to. The number and position of ports may differ depending on type of devices.2.Do not connect power until all the connections are completed. If you try to connect power while connecting cables, it may result in damage to the projector.3.Check the type of ports the projector is connected to.Check the following Before Connecting CONNECTING TO VIDEO EQUIPMENTConnecting to VCR/Camcorder/Cable Box Before ConnectionsCheck the followings before connecting the projector to other devices. Connections and Source SetupBefore Connections Connections and Source SetupConnecting to Video Equipment 2223 Connect COMPOSITE (yellow) input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. ■If the video equipment has S-VIDEO OUT port, connect it to S-VIDEO input port of the projector. Turn on the projector and press theCOMPOSITE button to select Composite . Connect the projector and the video equipment via S-Video cable and press the S-VIDEO button to select S-Video . ■When Composite Mode is not available, check the video cables are in place. 1 Viewing the picture NOTE ■Check that the projector and the video equipment are turned off before connecting cables.■This projector does not support sound. (Separate audio system is needed for sound.) Rear side of Projector VCR S-Video Cable Video (Composite) Cable Cable BoxCamcorder Composite COMPOSITE 1 S-VIDEO 2 or Rear Connection Refer to Rear Side and Cables on page 10 for cables used for connection. 2
24Connections and Source SetupConnecting to Video Equipment Connections and Source SetupConnecting to Video Equipment S-VIDEO OUTCOMPONENT VIDEO OUT AUDIO OUT 25 Connect antenna cable to antenna signal input terminal of the receiver. 1 Connect COMPONENT1 or COMPONENT2 (Y/P b/Pr) port of the projector to Component port of the receiver using Component Cable. ■If the receiver has DVI or PC OUT port, you can connect it to DVI or PC input port of the projector. 2 Turn on the projector and press the COMP.1 button to select Component1 . Press the COMP.2 button to select Component2 if COMPONENT2 is connected. If the receiver is connected to DVI or PC port, press the DVI or PC button to select DVI or PC respectively.■When Component Mode is not available, check that the component cables are in place. DVIPC Component1DVI Rear side of Projector Digital TV Receiver (Set-Top Box)DVI Video CablePC Video Cable Rear side of Projector DVDComponent Cable Component Cable CONNECTING TO VIDEO EQUIPMENTConnecting to DVD CONNECTING TO VIDEO EQUIPMENTConnecting to the Digital TV Receiver or Rear Connection Rear Connection Connect COMPONENT1 or COMPONENT2 (Y/Pb/Pr) ports of the projector to Component port on the rear side of DVD using Component Cable. Turn on the projector and press the COMP.1 button to select Component1 . Press the COMP.2 button to select Component2 if COMPONENT2 is connected. ■When Component Mode is not available, check that the component cables are in place. Viewing the picture NOTE Component Ports are marked as (Y, Pb,Pr), (Y, B-Y, R-Y) or (Y, Cb, Cr) depending on the manufacturer. Component1 Viewing the picture 1 COMP.1 1 COMP.2 2 21 2 COMP.1 1 COMP.2 2
Naming the External ConnectionsYou can select and set up the type of device you want to connect to the projector. Connections and Source SetupSetting up the External Input Source Connections and Source SetupNaming the External Connections 2627 Press the MENU button. The main menu is displayed. 1 Press the desired source button ( COMP.1 / COMP.2 / S-VIDEO/COMPOSITE / PC /DVI ). Pressing a button switches to the respective mode. You can not switch to the mode if the projector is not connected to the respective device. One Touch 1 MENU2, 3, 4Select4…/†5EXIT 1 MENU 2, 3, 4, 5 Select3, 4,5…/†6EXIT Setting up the External Input SourceYou can select a device connected to the projector to display. Press the button to select Input . The Input menu is displayed. 2 Press the button to select Source List . The Source List menu is displayed. 3 Press the ▲or ▼button to move to desired input mode, then press the button. The source input you chose is displayed. If the input mode is not selected, check that cables are in place. 4 Press the EXIT button to exit the menu. 5 Press the MENU button. The main menu is displayed. 1 Press the button to select Input . The Input menu is displayed. 2 Press the ▲or ▼button to move to Edit Name , then press the button. The Edit Name menu is displayed. 3 Press the EXIT button to exit the menu. 6 Press the ▲or ▼button to move to desired device, then press the button. Setup is switched to the selected device. 5 Input Source List : Component1 √ Edit Name √ Move Press the ▲or ▼button to move to edited input mode, then press the button. 4 Enter ReturnSource List Component1 : ---- Component2 : ---- S-Video : ---- Composite : ---- PC : ---- DVI : ---- Move Enter Return Input Source List : Component1 √ Edit Name √ Move Enter ReturnEdit Name Component1 : ---- √ Component2 : ---- √ S-Video : ---- √ Composite : ---- √ PC : ---- √ DVI : ---- √ Move Enter Return ----VCR DVD Cable HD Satellite AV Receiver† Edit Name Component1 : ---- √ Component2 : ---- √ S-Video : ---- √ Composite : ---- √ PC : ---- √ DVI : ---- √ Move Enter Return
Picture Adjustment VISUAL REALISM Picture Adjustment Selecting Picture Mode ..............................30 Custom Settings of the Picture ..................31 Changing the Color Standard ....................32 Selecting and Adjusting Color Temperature ................................................33 Gamma Correction ......................................34 Saving Custom Picture Settings (Save) ....35 Setting up DNIe ..........................................36 Selecting Picture Size ..................................37 Screen Position Adjustment ......................39 Film Mode ....................................................40 Overscan ......................................................41 Still Picture ..................................................42
Selecting Picture Mode Custom Settings of the PictureYou can adjust Contrast , Brightness , Sharpness , Color and Tint of the picture as desired. Picture AdjustmentSelecting Picture Mode Picture AdjustmentCustom Settings of the Picture 30 31 NOTE You cannot adjust tint when the input ofCOMPONENT1 and COMPONENT2 are set at 480p, 720p and 1080i. Contrast Used to adjust the contrast between the object and the background. Brightness Used to adjust brightness of the entire picture. Sharpness Used to adjust the outlines of the object sharper or less sharp. Color Used to adjust color lighter or deeper. Tint Used to obtain more natural color of objects using Green or Red enhancement. Custom Picture Menu Press the P.MODE button. Each press of the button, picture mode is switched toDynamic , Standard , Movie1 , Movie2 , User1 , User2 , User3 and Custom . Press the CUSTOM button. The Custom Picture menu is displayed. Refer to number 4 below to make adjustments. One Touch 1 MENU3, 4Select2, 4…/†5EXIT One Touch 1 MENU2, 3, 4Select2, 3, 4…/†/œ/√5EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. 2 Press the button.The Picture Mode is selected. 3 Press the button again. Press the ▲or ▼button to move to desired mode, then press the button. Setup is switched to the selected mode. 4 Press the EXIT button to exit the menu. 5Picture Color GammaModes TemperatureDynamic 9300K Gamma Mode3: Graphic Mode Standard 8000K Gamma Mode2: Video Mode Movie1 6500K Gamma Mode1: Film Mode Movie2 5500K Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Custom Picture , then press the button. The Custom Picture menu is displayed. 3 Press the ▲or ▼button to move to desired item, then press the button. Press the œor √button to adjust the selected item. 4 Press the EXIT button to exit the menu. 5 …Contrast† Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnPicture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Position DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter Return Dynamic Standard Movie1 Movie2 User1 User2 User3 Custom Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnCustom Picture Contrast 50 Brightness 50 Sharpness 50 Color 50 TintG 50R50†More Move Enter Return 50 Custom Picture Contrast 50 Brightness 50 Sharpness 50 Color 50 TintG 50R50†More Move Enter Return Standard NOTE User 1, 2, and 3 Saving Options are designed for setup and storage of various users’ customized picture modes.
Selecting and Adjusting Color Temperature You can change tint of the entire screen to suit your needs. Picture AdjustmentChanging the Color Standard Picture AdjustmentSelecting and Adjusting Color Temperature 3233 1 MENUSelect 2, 3, 4, 6, 7 …/†/œ/√8EXIT 2, 3, 4, 5, 6, 7 Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Custom Picture , then press the button. The Custom Picture menu is displayed. 3 Press the œor √buttons to select an option then press the button. The selected option is applied. 6 Press the ▲or ▼buttons to select an option then press the button. Press the œor √buttons to adjust the selected item. A separate adjustment window appears for making the adjustment. 7 Press the EXIT button to exit the menu. 8 Color Temperature Menu5500K Used to deliver optimal image quality for black-and-white films. Color temperature of the picture mode of Movie2 is set to 5500K. 6500K This temperature is used for the most video productions. It is set as Movie1 when it is manufactured, and may deliver the most precise tint. 8000K This mode is applied to bright places such as showrooms and other sales outlet. Sharpness and brightness are enhanced. It is suitable for brighter environments and is set to the Dynamic Mode. 9300K With both Sharpness and Brightness enhanced, this dynamic mode can be effectively used in bright ambient light conditions. Press the ▲or ▼button to move to Color Temperature , then press the button. The Color Temperature is selected. 4 Press the button to select the Color Temperature . 5 Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnCustom Picture … MoreColor Standard : SMPTE_C √ Color Temperature √ Gamma : Gamma Mode1 √ Save √ Move Enter Return …R-Gain† 50 Changing the Color StandardYou may adjust the color standard to suit the color standard of the input signal. 1 MENUSelect 2, 3, 4, 5…/†/œ/√6EXIT 2, 3, 4, 5 Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Custom Picture , then press the button. The Custom Picture menu is displayed. 3 Press the EXIT button to exit the menu. 6 SMPTE_C Standardized for Video Equipment by the NTSC Society of Motion Picture and Television Engineers HD High Definition, 1125 scan lines, standard ATSC definition TV submitted to the ITU-R by U.S., Japan and Canada, in 1986. EBU Regulations and standards for European PAL, Broadcasting Production and Technology, SECAM standardized by the European Broadcasting Union. Press the ▲or ▼button to move to Color Standard , then press the button. The Color Standard is selected. 4 Press the ▲or ▼button to move to desired item, then press the button. Press the œor √button to adjust the selected item. 5 Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnCustom Picture … MoreColor Standard : SMPTE_C √ Color Temperature √ Gamma : Gamma Mode1 √ Save √ Move Enter Return Color Standard SMPTE_C HD EBUMove EnterReturn Color Temperature 9300K 8000K6500K 5500K Move EnterReturn Color Standards
Saving Custom Picture SettingsUsed to save custom picture ( Contrast , Brightness , Sharpness , Color , Tint , Color Temperature and Gamma ) settings. Picture AdjustmentGamma Correction Picture AdjustmentSaving Custom Picture Settings 3435 1 MENU 2, 3, 4, 5, 6 Select 2, 3, 4, 5, 6 …/†/œ/√7EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Custom Picture , then press the button. The Custom Picture menu is displayed. 3 Press the EXIT button to exit the menu. 7 Press the ▲or ▼button to move to Save , then press the button. 4 Press the ▲or ▼button to move to desired mode, then press the button. 5 Press the œor √button to move to OK , then press the button. Setup is switched to the selected mode. 6 Save MoveOK Save Current Setting to User1? Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnCustom Picture … MoreColor Standard : SMPTE_C √ Color Temperature √ Gamma : Gamma Mode1 √ Save √ Move Enter ReturnSave User1 √ User2 √ User3 √ Move Enter Return Cancel EnterReturn NOTE The User1 , User2 and User3 modes are saved differently according to external input sources ( Component1 / Component2 / S-Video /Composite /PC/DVI ). Gamma CorrectionGamma is used to improve the picture quality with color balance. 1 MENU 2, 3, 4, 5 Select 2, 3, 4, 5 …/†6EXIT NOTE Refer to page 30 for information on Gamma Modes1 , 2, and 3. Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Custom Picture , then press the button. The Custom Picture menu is displayed. 3 Press the EXIT button to exit the menu. 6 Press the ▲or ▼button to move to Gamma , then press the button. 4 Press the ▲or ▼button to move to desired mode, then press the button. Setup is switched to the selected mode. 5 Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnCustom Picture … MoreColor Standard : SMPTE_C √ Color Temperature √ Gamma : Gamma Mode1 √ Save √ Move Enter ReturnCustom Picture … MoreColor Standard : SMPTE_C √ Color Temperature √ Gamma : Gamma Mode1 Save Move Enter Return Gamma Mode1 Gamma Mode2 Gamma Mode3
37Picture AdjustmentSelecting Picture Size 36Picture AdjustmentSetting up DNIe Setting up DNIeDNIe (Digital Natural Image engine) is an image enhancing function developed by Samsung Electronics. It enables users to enjoy brighter, sharper and more dynamic pictures. 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to DNIe , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to On , then press the button. Setup is switched to the selected mode. 4Off DNle Mode Off Demo DNle On/Off Picture Comparison Mode On DNle Mode On DNIe Mode Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnPicture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off Film Mode : On Overscan : On Move Enter Return Off Demo On Selecting Picture Size 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT Press the P.SIZE button. Each press of the button, picture size is switched to Full, Panorama , Zoom1 , Zoom2 and 4:3. One Touch Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Picture Size , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to desired mode, then press the button. Setup is switched to the selected mode. 4 Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnPicture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Position DNIe : Off Film Mode : On Overscan : On Move Enter Return Full Panorama Zoom1 Zoom2 4 : 3
Picture AdjustmentSelecting Picture Size Picture AdjustmentScreen Position Adjustment39 38 O : Supported Modes X : Unsupported ModesSupported Picture Sizes 1080i 720p 576p 480p 16:9 Mode 4:3 Mode 1080i 720p 576p 480p 16:9 Mode 4:3 Mode 1080i 720p 576p 480p 576i 480i 480iO O O O O O O O O O O O O O O O O O OX X X X X X X X X X X X X X X X O O OX X O O X X X X O O X X X X O O O O OX X X X X X X X X X X X X X X X O O OO X O O X O O X O O X O O O O O O O O Signal Input Mode Full Panorama Zoom1 Zoom2Picture Size HD HD PC HD SD SD Source DVI PC (D-Sub) Composite & S-Video4:3 PC Component NOTE Refer to page 58 for display modes supported. Screen Position AdjustmentAdjust the screen position if the edges are not aligned. 1 MENU2, 3Select2, 3, 4…/†/œ/√5EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Position , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲, ▼, œ, or √ buttons to adjust the position. The Screen is moved and set in the selected position. 4 Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnPositionMove Return…† √ œ NOTE The respective position information is set and stored automatically to the corresponding external input modes (Component 1, 2 / S-VIDEO, Composite / PC / DVI).