Samsung Projector Sp H700 User Manual

							OWNERS INSTRUCTIONS
Owners Instructions
BP68-00340C-01
SP-H700/H500 
						

							Connections and Source SetupBefore Connections
............................................22
Connecting to Video Equipment
Connecting to VCR/Camcorder/Cable Box ..........23
Connecting to DVD ............................................24
Connecting to the Digital TV Receiver..................25
Setting up the External Input Source
................26
Naming the External Connections
....................27
PreparationFeatures and Design
..............................................4
Caution on Lamp Use and Replacement
..............5
Projector and Accessories 
Front/Upper Side and Accessories ........................8
Rear Side and Cables ........................................10
Remote Control Buttons ....................................11
Operating the Remote Control............................12
Installation and Basic Adjustments
Installation/Turning On  ....................................14
Zooming and Focus Adjustment..........................16
Leveling with Adjustable Feet ............................17
Using the Lens Shift Dial ....................................18
Screen Size and Projection Distance....................19
PreparationTable of Contents3
PreparationTable of Contents2
Table of Contents
SetupFlipping/Reversing the Projected Image
........44
Light Setting
........................................................45
Correcting Vertical Keystone
............................46
Test Patterns
......................................................47
Restoring the Factory Default Settings
............48
Information
..........................................................49
Picture Adjustment Selecting Picture Mode
......................................30
Custom Settings of the Picture
..........................31
Changing the Color Standard
............................32
Selecting and Adjusting Color Temperature
....33
Gamma Correction
..............................................34
Saving Custom Picture Settings
........................35
Setting up DNle
..................................................36
Selecting Picture Size
..........................................37
Screen Position Adjustment
..............................39
Film Mode
............................................................40
Overscan
..............................................................41
Still Picture
..........................................................42
Menu OptionSetting the Language
..........................................52
Setting the Menu Position
..................................53
Setting the Menu Translucency
..........................54
Setting the Menu Display Time
..........................55
Selecting Quick Menu
..........................................56
Connecting to PCBefore Connecting to PC
....................................58
Setting up the PC Environment
..........................59
Connecting to PC
..................................................60
Automatic Picture Adjustment
..........................62
Frequency Adjustment
........................................63
Fine Tuning with the Phase Adjustment
..........64
Zooming the Screen
............................................65
Reset the PC
........................................................66
TroubleshootingBefore Contacting Service Personnel
................68
Other InformationStorage and Maintenance
..................................72
Purchasing Accessories
......................................73
Structure of Screen Menu
..................................74
Lamp Replacement
..............................................77
Specifications
......................................................78
Remote Control Specifications
..........................79 
						

							PreparationFeatures and Design4
Caution on Lamp Use and Replacement
PreparationCaution on Lamp Use and Replacement5
Features and Design
■SP-H700: DLP
TMHD2+
DMD panel capable of 1280x720 resolution
■SP-H500: DLP
TMED2 DMD panel capable of 1024x576 resolution
■5X-speed color wheel designed to reduce digital artifacts■250W Lamp designed to improve luminanceOptical engine adopting advanced DLP technology■Quality picture tuning focused on improving color - this unit aims at
realizing color coordinates that meet broadcasting standards on
video production.Vivid colors■The airflow and fan installation structure are optimized to minimize
fan noise and beam leakage.Minimized fan noise and light leakage■Five types of input ports including a DVI-D (compatible with HDCP)
port, two Component ports improve connection to external
peripherals.Various Input Ports■This unit allows adjustment of each input port.■The unit has a reference pattern that can be used for positioning and
adjustment.■The remote control is backlit to improve usability in a dark
environment.User adjustments
■The Projector lamp changes in nature depending on time of use and
using environment. Refer to the installation and other
recommended operational sections of the user’s manual to avoid
rapid degradation of performance and deterioration of picture
quality. The projector lamp requires regular replacement.■Free servicing will be offered within 90 days after purchasing of the
product and within 300 hours of product use, if the problem is due
to a defective lamp.■You can check the lamp use time by pressing the INFO button on
the remote control.Projector Lamp■Unplug the power cord before replacing the lamp.■Inside of the projector is very hot. Cool off the projector for at least
an hour after turning off.■Contact your dealer to purchase a lamp for replacement. 
(Ultra violets from the lamp can damage your eyes.)■Turn off the power of the lamp before replacement or repair.
(Due to the high-pressure of the lamp, it is possible to explode.)■When the lamp is broken, be careful not to be hurt by glass pieces.
Refer to the manual for proper handling.Caution on Lamp Replacement■This projector produces intense light. Do not stare light source
directly.■Do not touch the exhaust vent during operation. It can be very hot.■Do not expose the unit to rain or moisture.Caution on Lamp Use 
						

							Preparation
Projector and Accessories
............................8
Installation and Basic Adjustments
..........14
VISUAL REALISM 
						

							Front/Upper Side PROJECTOR AND ACCESSORIESFront/Upper Side and Accessories
PreparationProjector and Accessories8
PreparationProjector and Accessories9
1 1
Indicators-TEMP (Red LED)-LAMP (Blue LED)-STAND BY (Blue LED)Refer to page 9 for details.
2 2
Remote Control Signal Receiver
3 3
Focus RingUsed for Focus Adjustment.
4 4
Lens
5 5
Adjustable FeetYou can adjust the screen position by moving
up and down the adjustable feet.
6 6
Zoom KnobUsed to enlarge or reduce image size.
7 7
MENUUsed to open the on-screen Menu.
8 8
POWERUsed to turn the projector on or off.
9 9
SOURCEUsed to select input signals from the external
sources.
1 10
0
Select and Move ButtonUsed to select an menu item, and to move the
cursor.
1 11
1
LENS SHIFT DialYou can adjust screen images up and down
within the lens range.
Remote Control/
2 Batteries 
Power Cable  
Owners Instructions
1
2
3
4
5
67
8
9
10
11
: Turned On      : Flashing      : Turned Off
STANDBY LAMP TEMP
Information
If you press the 
POWER
button on the remote control or projector, the screen
appears within 30 seconds.
The projector is in normal operating condition.
The projector is warming up after 
POWER
button has been pressed.
The 
POWER
button is pressed to turn off the projector, and the cooling system is
in operation to cool off inside of the projector. (Lasts for about 1 minute and 30
seconds) 
Refer to measure 1 below if the cooling fan inside the projector is not in normal
operation condition.
Refer to measure 2 below if the lamp cover protecting the lamp unit is not closed
properly.
Power is turned off automatically when temperature inside of the projector goes
beyond the control limit. Refer to measure 3.
Refer to measure 4 below if the life span of the lamp is running out or a problem
with the lamp is detected.
When the cooling fan system is
not in normal operating condition.
When the lamp cover protecting
the lamp unit is not properly
closed or the sensor system is not
in normal operating condition.
When temperature inside of the
projector becomes too high.
The lamp is malfunctioning after
abnormal power off or restarting
right after turning off the projector.
When brightness of the picture
screen degrades or image
deterioration is found.Unplug and plug the cord and restart the projector. If the
problem does not disappear, contact a dealer or service
personnel near you.
Check the screw on the bottom side of the projector. If you
do not find any problem, contact a dealer or service
personnel near you.
Adjust the position of the projector following the
installation instructions of this manual and cool off the
projector before restarting it. If the problem does not
disappear, contact a dealer or service personnel near you.
Power off the projector and cool it off for some time before
restarting it.
Check how long the lamp has been used on Information
and contact a dealer or service personnel near you for lamp
replacement.
Measure 1
Measure 2
Measure 3
Measure 4Indicator InformationClassification State Measures
Accessories
Clearing Indicator Problems 
NOTE
This Projector uses a cooling fan system to keep the unit from overheating. 
Operation of the cooling fan may cause noise, which does not affect the product performance. 
No exchange or refund for the noise concern. 
						

							PreparationProjector and Accessories10
PreparationProjector and Accessories11
1 1
ONUsed to turn on the projector.
2 2
COMP.1 
(Pages 24~26)
Used to switch to COMPONENT 1 Mode.
3 3
COMP.2 
(Pages 24~26)
Used to switch to COMPONENT 2 Mode.
4 4
S-VIDEO 
(Pages 23, 26)
Used to switch to S-VIDEO Mode.
5 5
P.SIZE 
(Page 37)
Used to adjust the size of picture screen.
6 6
P.MODE 
(Page 30)
Used to select Picture Mode.
7 7
STILL 
(Page 42)
Used to see still images.
8 8
V.KEYSTONE 
(Page 46)
You can use this function for trapezoidal
adjustment of the image.
9 9
QUICK 
(Page 56)
Used to quickly select the previous menu.
1 10
0
MENUUsed to display Menu Screen.
1 11
1
…†œ√
(Move) /  (Select)
Used to move to or select each menu item.
1 12
2
OFFUsed to turn off the projector.
1 13
3
LIGHT 
(Page 13)
Used to operate remote control in dark
room.
1 14
4
PC (Pages 25, 60~66)
Used to switch to PC Mode.
1 15
5
DVI 
(Page 25, 60)
Used to switch to DVI Mode.
1 16
6
COMPOSITE 
(Pages 23, 26)
Used to switch to COMPOSITE Mode.
1 17
7
CUSTOM 
(Page 31)
Used to select Picture User Adjust Mode.
1 18
8
INSTALL 
(Page 44)
Used to flip or  reverse the projected image.
1 19
9
INFO 
(Page 49)
Used to check source signals, picture setup,
PC screen adjustment and lamp lifespan.
2 20
0
EXITUsed to make Menu Screen disappear.
123456711
121317161514181920
8910
PROJECTOR AND ACCESSORIESRear Side and CablesRear SidePower CordConnected to the wall
outlet 
∏. 
Video (COMPOSITE) Cable Connected to the
connection port 
ˇ.
S-Video CableConnected to the
connection port 
´.
Component CableConnected to the
connection port 
’.
PC Video CableConnected to the
connection port 
Ø.
DVI-D CableConnected to the
connection port 
ˆ.
1 1
Remote Control Signal Receiver 
2 2
S-VIDEO Input port
3 3
COMPOSITE Input ports
4 4
RS-232C port
5 5
DVI Input port
6 6
PC Input port
7 7
AC Power Input
8 8
Power Switch
9 9
Component Input port
1
23
4
5
7
69
8
PROJECTOR AND ACCESSORIESRemote Control Buttons
Cables 
						

							PreparationProjector and Accessories12
PreparationProjector and Accessories13
The remote control is effective within a 30°
angle 23~33 ft (7~10m) from the projector.CAUTION
■Keep used batteries away from children and
dispose of them properly.■Do not use new and used batteries together.
Replace two batteries at the same time.■Remove batteries when the projector is not
used for long periods of time.
Press the 
LIGHT
button of the remote
controller for five seconds. The remote
control buttons are lit for about 5 seconds
and turn off automatically.
Setting the Adjustment
(right), or move to
lower item.
1.
Press on the  part of the lid to remove it.
2.
Insert two AAA-sized 1.5V batteries by
matching 
+/-.
3.
Close the lid.
LIGHT
PROJECTOR AND ACCESSORIESOperating the Remote ControlOperating Move/Select ButtonInserting Batteries into Remote Control
Allowable range & angle of receiving the remote control signalUsing Remote Control in Dark Place (LIGHT)
Move Menu Item
(Down) 
Move Menu Item (Up)
Select the current
setting
Setting the Adjustment
(left), or move to
upper item 
						

							14
PreparationInstallation and Basic Adjustments15
1.
Plug the power cord into the power terminal on the rear side of the projector.
2.
Press and push the power switch on the rear side of the projector toward 
-.
3.
Press the 
POWER
button of the projector or the 
ON
button of the remote control.
4.
Screen display comes up in 30 seconds.
NOTE
■The projector may be installed on the ceiling
in front / back side of the screen.■When installing the projector on the ceiling,
contact your dealer.
Install the projector so that the projection is
perpendicular to the screen.
Install a translucent screen to place the
projector on the backside of  the screen.
The Translucent will show the horizontally
flipped image. Rotate the image (projected
from the projector) horizontally. 
(Page 44)Install the projector at the viewers’ side.
23 1
INSTALLATION AND BASIC ADJUSTMENTSInstallation and Turning On
PreparationInstallation and Basic Adjustments
To Install the ProjectorInstalling Projector on Backside of ScreenInstalling Projector in Front of the Screen
Turning On Projector 
NOTE
■Center the lens to the screen. If the projector
is not positioned perpendicular to the
screen, the image may appear trapezoidal.■Do not install the screen in a bright place as
it makes it harder to see the screen.■Darken the room when installing the
projector in a bright place.
NOTE
■When you turn off the projector, the cooling fan stops within 1 minute and 30 seconds.■When the cooling fan stops, push the power switch toward 
O and unplug the power cord. 
						

							PreparationInstallation and Basic Adjustments16
PreparationInstallation and Basic Adjustments17
For level placing of the projector, adjust the Adjustable Feet of the projector.
1.
You can adjust the size of image within zoom range by manipulating the Zoom Knob.
2.
Focus the picture on the screen using the Focus Ring.
12
NOTE
■You may adjust the level of the projector up to 5 degrees.■Depending on the position of the projector, Keystone distortion of image may appear. (Page 46)
NOTE
Focus may appear dim if the projector is installed at a shorter than recommended distance. (Page 20)
Zoom KnobAdjustable Feet
Focus Ring
INSTALLATION AND BASIC ADJUSTMENTSZoom and Focus Adjustment
INSTALLATION AND BASIC ADJUSTMENTSLeveling with Adjustable Feet
Using the Zoom Knob and the Focus Ring
Using Adjustable Feet  
						

							PreparationInstallation and Basic Adjustments18
PreparationInstallation and Basic Adjustments19
Lens Shift Dial
Move the picture projected on the screen up and down within the lens range by turning the
Lens Shift Dial on the top side of the projector with your fingers.
UP
DOWN
Install the projector on a flat, even surface and level the projector using the adjustable feet
to realize optimal picture quality. If images are not clear, adjust them using the Zoom Knob
or Focus Ring, or move the projector forward and backward.NOTE
This projector is designed to show images optimally on a 80 to 150 inch sized screen.
Screen
ScreenX
Y
INSTALLATION AND BASIC ADJUSTMENTSUsing the Lens Shift Dial
INSTALLATION AND BASIC ADJUSTMENTSScreen Size and Projection Distance
Using the Lens Shift Dial
Check the following before reading this manual.
300
250
200
190
180
170
160
150
140
130
120
11 0
100
90
80
70
60
50
43
40
33
30.385666.3/262.3
555.3/218.6
444.2/174.9
422.0/166.1
399.8/157.4
377.6/148.7
355.4/139.9
333.2/131.2
311.0/122.4
288.7/113.7
266.5/104.9
244.3/96.2
222.1/87.4
199.9/78.7
177.7/70.0
155.5/61.2
133.3/52.5
111.143.7
95.5/37.6
88.8/35.0
73.3/28.9
67.5/26.6374.6/147.2
312.2/122.9
249.7/98.3
237.2/93.4
224.7/88.5
212.3/83.6
199.8/78.7
187.3/73.7
174.8/68.8
162.3/63.9
149.8/59.0
137.3/54.1
124.9/49.2
112.4/44.3
99.9/39.3
87.4/34.4
74.9/29.5
62.4/24.6
53.7/21.1
49.9/19.6
41.2/16.2
37.9/14.910.5/34.0
8.6/28.3
6.9/22.7
6.6/21.5
6.2/20.4
5.9/19.3
5.5/18.1
5.2/17.0
4.8/15.9
4.5/14.7
4.1/13.6
3.8/12.5
3.5/11.3
3.1/10.2
2.8/9.1
2.4/7.9
2.1/6.8
1.7/5.7
1.5/4.9
1.4/4.5
1.1/3.7
1.0/3.413.6/44.8
11.4/37.3
9.1/29.8
8.6/28.4
8.2/26.9
7.7/25.4
7.3/23.9
6.8/22.4
6.4/20.9
5.9/19.4
5.5/17.9
5.0/16.4
4.5/14.9
4.1/13.4
3.6/11.9
3.2/10.4
2.7/9.0
2.3/7.5
1.9/6.4
1.8/6.0
1.5/4.9
1.4/4.531.2/12.3
26.0/10.2
20.8/8.2
19.8/7.8
18.7/7.4
17.7/7.0
16.6/6.5
15.6/6.1
14.6/5.7
13.5/5.3
12.5/4.9
11.4/4.5
10.4/4.1
9.4/3.7
8.3/3.3
7.3/2.9
6.2/2.4
5.2/2.0
4.5/1.8
4.2/1.7
3.4/1.3
3.2/1.3 Diagonal Image Size
(inch)Horizontal
(X:cm/inch)Vertical
(Y:cm/inch) Screen Size (16:9)
Min
(m/ft)Max
(m/ft) Throw Distance (Z)
Distance from Lens Center
to Image Bottom
(Z’:cm/inch)
NOTE
■Z: Throw Distance
■Z: Distance from Lens Center to Image Bottom
SP-H700