Samsung Plasma TV E550 User Manual
Have a look at the manual Samsung Plasma TV E550 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings in the User manual. Caption on the TV menu is grayed out. You cannot select the Caption menu if you have selected a source connected to the TV via HDMI or Component. To view captions, you must turn on the external device's Caption function. There is a plastic smell from the TV.
This smell is normal and will dissipate in a short time. The TV Signal Information is unavailable in the Self Diagnosis menu. This function is only available for digital channels the TV receives from an Antenna / RF /Coax connection. The TV is tilted to the side. Remove the base stand from the TV and reassemble stand. The channel menu is grayed out
(unavailable).The Channel menu is only available when you select the TV source. Your settings are lost after 30 minutes or every time the TV is turned off. If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode using the Setup procedure. Select TV in Source using your remote, and
go to System → Setup. You have intermittent loss of audio or video. Check the cable connections and reconnect them. Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90 degree connectors.
You see small particles when you look closely at the edge of the frame of the TV.This is part of the product’s design and is not a defect. The PIP menu is not available. PIP functionality is only available when you are using an HDMI or Component source. POP (TV’s internal banner ad) appears on the screen. Select Home Use under Setup mode.
For details, refer to the Setup Feature. The Plasma TV is making a humming noise. for PDP TV Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. You can also have loud humming if the
back of your Plasma TV is too close to a wall or other hard surface. Also, try rerouting your connection cables. An improperly installed wall mount can also create excessive noise. Image Retention (Burn In) Issue. for PDP TV To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel Shift lets you set the picture so it moves slightly up and
down (Vertical Line) and side to side (Horizontal Dot). The regular, slight movement of the picture reduces screen burn in.
3D (Troubleshooting) for LED 6500 ― 7150 Series and PDP TV The 3D Active Glasses are not working correctly Make sure the glasses are turned on. The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as
possible from the 3D Active Glasses. The 3D images don’t look quite right. The ideal viewing distance is three times or more the height of the screen. We also recommend sitting with your eyes level with the screen. The batteries in the 3D glasses don’t last Turn off 3D glasses while not using them. If you leave 3D glasses on, battery lifespan is shortened.